mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/protocols/coap_server/main/coap_server_example_main.c

371 wiersze
14 KiB
C
Czysty Wina Historia

/* CoAP server Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
/*
* WARNING
* libcoap is not multi-thread safe, so only this thread must make any coap_*()
* calls. Any external (to this thread) data transmitted in/out via libcoap
* therefore has to be passed in/out by xQueue*() via this thread.
*/
#include <string.h>
#include <sys/socket.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "esp_log.h"
#include "esp_wifi.h"
#include "esp_event.h"
#include "nvs_flash.h"
#include "protocol_examples_common.h"
#include "coap3/coap.h"
#ifndef CONFIG_COAP_SERVER_SUPPORT
#error COAP_SERVER_SUPPORT needs to be enabled
#endif /* COAP_SERVER_SUPPORT */
/* The examples use simple Pre-Shared-Key configuration that you can set via
'idf.py menuconfig'.
If you'd rather not, just change the below entries to strings with
the config you want - ie #define EXAMPLE_COAP_PSK_KEY "some-agreed-preshared-key"
Note: PSK will only be used if the URI is prefixed with coaps://
instead of coap:// and the PSK must be one that the server supports
(potentially associated with the IDENTITY)
*/
#define EXAMPLE_COAP_PSK_KEY CONFIG_EXAMPLE_COAP_PSK_KEY
/* The examples use CoAP Logging Level that
you can set via 'idf.py menuconfig'.
If you'd rather not, just change the below entry to a value
that is between 0 and 7 with
the config you want - ie #define EXAMPLE_COAP_LOG_DEFAULT_LEVEL 7
*/
#define EXAMPLE_COAP_LOG_DEFAULT_LEVEL CONFIG_COAP_LOG_DEFAULT_LEVEL
const static char *TAG = "CoAP_server";
static char espressif_data[100];
static int espressif_data_len = 0;
#ifdef CONFIG_COAP_MBEDTLS_PKI
/* CA cert, taken from coap_ca.pem
Server cert, taken from coap_server.crt
Server key, taken from coap_server.key
The PEM, CRT and KEY file are examples taken from
https://github.com/eclipse/californium/tree/master/demo-certs/src/main/resources
as the Certificate test (by default) for the coap_client is against the
californium server.
To embed it in the app binary, the PEM, CRT and KEY file is named
in the component.mk COMPONENT_EMBED_TXTFILES variable.
*/
extern uint8_t ca_pem_start[] asm("_binary_coap_ca_pem_start");
extern uint8_t ca_pem_end[] asm("_binary_coap_ca_pem_end");
extern uint8_t server_crt_start[] asm("_binary_coap_server_crt_start");
extern uint8_t server_crt_end[] asm("_binary_coap_server_crt_end");
extern uint8_t server_key_start[] asm("_binary_coap_server_key_start");
extern uint8_t server_key_end[] asm("_binary_coap_server_key_end");
#endif /* CONFIG_COAP_MBEDTLS_PKI */
#define INITIAL_DATA "Hello World!"
/*
* The resource handler
*/
static void
hnd_espressif_get(coap_resource_t *resource,
coap_session_t *session,
const coap_pdu_t *request,
const coap_string_t *query,
coap_pdu_t *response)
{
coap_pdu_set_code(response, COAP_RESPONSE_CODE_CONTENT);
coap_add_data_large_response(resource, session, request, response,
query, COAP_MEDIATYPE_TEXT_PLAIN, 60, 0,
(size_t)espressif_data_len,
(const u_char *)espressif_data,
NULL, NULL);
}
static void
hnd_espressif_put(coap_resource_t *resource,
coap_session_t *session,
const coap_pdu_t *request,
const coap_string_t *query,
coap_pdu_t *response)
{
size_t size;
size_t offset;
size_t total;
const unsigned char *data;
coap_resource_notify_observers(resource, NULL);
if (strcmp (espressif_data, INITIAL_DATA) == 0) {
coap_pdu_set_code(response, COAP_RESPONSE_CODE_CREATED);
} else {
coap_pdu_set_code(response, COAP_RESPONSE_CODE_CHANGED);
}
/* coap_get_data_large() sets size to 0 on error */
(void)coap_get_data_large(request, &size, &data, &offset, &total);
if (size == 0) { /* re-init */
snprintf(espressif_data, sizeof(espressif_data), INITIAL_DATA);
espressif_data_len = strlen(espressif_data);
} else {
espressif_data_len = size > sizeof (espressif_data) ? sizeof (espressif_data) : size;
memcpy (espressif_data, data, espressif_data_len);
}
}
static void
hnd_espressif_delete(coap_resource_t *resource,
coap_session_t *session,
const coap_pdu_t *request,
const coap_string_t *query,
coap_pdu_t *response)
{
coap_resource_notify_observers(resource, NULL);
snprintf(espressif_data, sizeof(espressif_data), INITIAL_DATA);
espressif_data_len = strlen(espressif_data);
coap_pdu_set_code(response, COAP_RESPONSE_CODE_DELETED);
}
#ifdef CONFIG_COAP_MBEDTLS_PKI
static int
verify_cn_callback(const char *cn,
const uint8_t *asn1_public_cert,
size_t asn1_length,
coap_session_t *session,
unsigned depth,
int validated,
void *arg
)
{
coap_log(LOG_INFO, "CN '%s' presented by server (%s)\n",
cn, depth ? "CA" : "Certificate");
return 1;
}
#endif /* CONFIG_COAP_MBEDTLS_PKI */
static void
coap_log_handler (coap_log_t level, const char *message)
{
uint32_t esp_level = ESP_LOG_INFO;
char *cp = strchr(message, '\n');
if (cp)
ESP_LOG_LEVEL(esp_level, TAG, "%.*s", (int)(cp-message), message);
else
ESP_LOG_LEVEL(esp_level, TAG, "%s", message);
}
static void coap_example_server(void *p)
{
coap_context_t *ctx = NULL;
coap_address_t serv_addr;
coap_resource_t *resource = NULL;
snprintf(espressif_data, sizeof(espressif_data), INITIAL_DATA);
espressif_data_len = strlen(espressif_data);
coap_set_log_handler(coap_log_handler);
coap_set_log_level(EXAMPLE_COAP_LOG_DEFAULT_LEVEL);
while (1) {
coap_endpoint_t *ep = NULL;
unsigned wait_ms;
int have_dtls = 0;
/* Prepare the CoAP server socket */
coap_address_init(&serv_addr);
serv_addr.addr.sin6.sin6_family = AF_INET6;
serv_addr.addr.sin6.sin6_port = htons(COAP_DEFAULT_PORT);
ctx = coap_new_context(NULL);
if (!ctx) {
ESP_LOGE(TAG, "coap_new_context() failed");
continue;
}
coap_context_set_block_mode(ctx,
COAP_BLOCK_USE_LIBCOAP|COAP_BLOCK_SINGLE_BODY);
#ifdef CONFIG_COAP_MBEDTLS_PSK
/* Need PSK setup before we set up endpoints */
coap_context_set_psk(ctx, "CoAP",
(const uint8_t *)EXAMPLE_COAP_PSK_KEY,
sizeof(EXAMPLE_COAP_PSK_KEY) - 1);
#endif /* CONFIG_COAP_MBEDTLS_PSK */
#ifdef CONFIG_COAP_MBEDTLS_PKI
/* Need PKI setup before we set up endpoints */
unsigned int ca_pem_bytes = ca_pem_end - ca_pem_start;
unsigned int server_crt_bytes = server_crt_end - server_crt_start;
unsigned int server_key_bytes = server_key_end - server_key_start;
coap_dtls_pki_t dtls_pki;
memset (&dtls_pki, 0, sizeof(dtls_pki));
dtls_pki.version = COAP_DTLS_PKI_SETUP_VERSION;
if (ca_pem_bytes) {
/*
* Add in additional certificate checking.
* This list of enabled can be tuned for the specific
* requirements - see 'man coap_encryption'.
*
* Note: A list of root ca file can be setup separately using
* coap_context_set_pki_root_cas(), but the below is used to
* define what checking actually takes place.
*/
dtls_pki.verify_peer_cert = 1;
dtls_pki.check_common_ca = 1;
dtls_pki.allow_self_signed = 1;
dtls_pki.allow_expired_certs = 1;
dtls_pki.cert_chain_validation = 1;
dtls_pki.cert_chain_verify_depth = 2;
dtls_pki.check_cert_revocation = 1;
dtls_pki.allow_no_crl = 1;
dtls_pki.allow_expired_crl = 1;
dtls_pki.allow_bad_md_hash = 1;
dtls_pki.allow_short_rsa_length = 1;
dtls_pki.validate_cn_call_back = verify_cn_callback;
dtls_pki.cn_call_back_arg = NULL;
dtls_pki.validate_sni_call_back = NULL;
dtls_pki.sni_call_back_arg = NULL;
}
dtls_pki.pki_key.key_type = COAP_PKI_KEY_PEM_BUF;
dtls_pki.pki_key.key.pem_buf.public_cert = server_crt_start;
dtls_pki.pki_key.key.pem_buf.public_cert_len = server_crt_bytes;
dtls_pki.pki_key.key.pem_buf.private_key = server_key_start;
dtls_pki.pki_key.key.pem_buf.private_key_len = server_key_bytes;
dtls_pki.pki_key.key.pem_buf.ca_cert = ca_pem_start;
dtls_pki.pki_key.key.pem_buf.ca_cert_len = ca_pem_bytes;
coap_context_set_pki(ctx, &dtls_pki);
#endif /* CONFIG_COAP_MBEDTLS_PKI */
ep = coap_new_endpoint(ctx, &serv_addr, COAP_PROTO_UDP);
if (!ep) {
ESP_LOGE(TAG, "udp: coap_new_endpoint() failed");
goto clean_up;
}
if (coap_tcp_is_supported()) {
ep = coap_new_endpoint(ctx, &serv_addr, COAP_PROTO_TCP);
if (!ep) {
ESP_LOGE(TAG, "tcp: coap_new_endpoint() failed");
goto clean_up;
}
}
#if defined(CONFIG_COAP_MBEDTLS_PSK) || defined(CONFIG_COAP_MBEDTLS_PKI)
if (coap_dtls_is_supported()) {
#ifndef CONFIG_MBEDTLS_TLS_SERVER
/* This is not critical as unencrypted support is still available */
ESP_LOGI(TAG, "MbedTLS DTLS Server Mode not configured");
#else /* CONFIG_MBEDTLS_TLS_SERVER */
serv_addr.addr.sin6.sin6_port = htons(COAPS_DEFAULT_PORT);
ep = coap_new_endpoint(ctx, &serv_addr, COAP_PROTO_DTLS);
if (!ep) {
ESP_LOGE(TAG, "dtls: coap_new_endpoint() failed");
goto clean_up;
}
have_dtls = 1;
#endif /* CONFIG_MBEDTLS_TLS_SERVER */
}
if (coap_tls_is_supported()) {
#ifndef CONFIG_MBEDTLS_TLS_SERVER
/* This is not critical as unencrypted support is still available */
ESP_LOGI(TAG, "MbedTLS TLS Server Mode not configured");
#else /* CONFIG_MBEDTLS_TLS_SERVER */
serv_addr.addr.sin6.sin6_port = htons(COAPS_DEFAULT_PORT);
ep = coap_new_endpoint(ctx, &serv_addr, COAP_PROTO_TLS);
if (!ep) {
ESP_LOGE(TAG, "tls: coap_new_endpoint() failed");
goto clean_up;
}
#endif /* CONFIG_MBEDTLS_TLS_SERVER */
}
if (!have_dtls) {
/* This is not critical as unencrypted support is still available */
ESP_LOGI(TAG, "MbedTLS (D)TLS Server Mode not configured");
}
#endif /* CONFIG_COAP_MBEDTLS_PSK || CONFIG_COAP_MBEDTLS_PKI */
resource = coap_resource_init(coap_make_str_const("Espressif"), 0);
if (!resource) {
ESP_LOGE(TAG, "coap_resource_init() failed");
goto clean_up;
}
coap_register_handler(resource, COAP_REQUEST_GET, hnd_espressif_get);
coap_register_handler(resource, COAP_REQUEST_PUT, hnd_espressif_put);
coap_register_handler(resource, COAP_REQUEST_DELETE, hnd_espressif_delete);
/* We possibly want to Observe the GETs */
coap_resource_set_get_observable(resource, 1);
coap_add_resource(ctx, resource);
#if defined(CONFIG_EXAMPLE_COAP_MCAST_IPV4) || defined(CONFIG_EXAMPLE_COAP_MCAST_IPV6)
esp_netif_t *netif = NULL;
for (int i = 0; i < esp_netif_get_nr_of_ifs(); ++i) {
char buf[8];
netif = esp_netif_next(netif);
esp_netif_get_netif_impl_name(netif, buf);
#if defined(CONFIG_EXAMPLE_COAP_MCAST_IPV4)
coap_join_mcast_group_intf(ctx, CONFIG_EXAMPLE_COAP_MULTICAST_IPV4_ADDR, buf);
#endif /* CONFIG_EXAMPLE_COAP_MCAST_IPV4 */
#if defined(CONFIG_EXAMPLE_COAP_MCAST_IPV6)
/* When adding IPV6 esp-idf requires ifname param to be filled in */
coap_join_mcast_group_intf(ctx, CONFIG_EXAMPLE_COAP_MULTICAST_IPV6_ADDR, buf);
#endif /* CONFIG_EXAMPLE_COAP_MCAST_IPV6 */
}
#endif /* CONFIG_EXAMPLE_COAP_MCAST_IPV4 || CONFIG_EXAMPLE_COAP_MCAST_IPV6 */
wait_ms = COAP_RESOURCE_CHECK_TIME * 1000;
while (1) {
int result = coap_io_process(ctx, wait_ms);
if (result < 0) {
break;
} else if (result && (unsigned)result < wait_ms) {
/* decrement if there is a result wait time returned */
wait_ms -= result;
}
if (result) {
/* result must have been >= wait_ms, so reset wait_ms */
wait_ms = COAP_RESOURCE_CHECK_TIME * 1000;
}
}
}
clean_up:
coap_free_context(ctx);
coap_cleanup();
vTaskDelete(NULL);
}
void app_main(void)
{
ESP_ERROR_CHECK( nvs_flash_init() );
ESP_ERROR_CHECK(esp_netif_init());
ESP_ERROR_CHECK(esp_event_loop_create_default());
/* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
* Read "Establishing Wi-Fi or Ethernet Connection" section in
* examples/protocols/README.md for more information about this function.
*/
ESP_ERROR_CHECK(example_connect());
xTaskCreate(coap_example_server, "coap", 8 * 1024, NULL, 5, NULL);
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik