esp-idf/tools/esp_prov
harshal.patil e7a4062a30 docs: added documentation for wifi_ctrl endpoint and updated esp_prov readme 2022-11-01 14:19:01 +05:30
..
proto
prov wifi_provisioning: added wifi-ctrl reprov endpoint 2022-11-01 14:19:01 +05:30
security
transport
utils
README.md docs: added documentation for wifi_ctrl endpoint and updated esp_prov readme 2022-11-01 14:19:01 +05:30
__init__.py
esp_prov.py wifi_provisioning: added wifi-ctrl reprov endpoint 2022-11-01 14:19:01 +05:30

README.md

ESP Provisioning Tool

Description

esp_prov - A python-based utility for testing the provisioning examples over a host machine.

Usage of esp-prov assumes that the provisioning app has specific protocomm endpoints active. These endpoints are active in the provisioning examples and accept specific protobuf data structure:

Endpoint Name URI (HTTP server on ip:port) Description
prov-session http://ip:port/prov-session Security endpoint used for session establishment
prov-config http://ip:port/prov-config Endpoint used for configuring Wi-Fi credentials on device
proto-ver http://ip:port/proto-ver Version endpoint for checking protocol compatibility
prov-scan http://ip:port/prov-scan Endpoint used for scanning Wi-Fi APs
prov-ctrl http://ip:port/prov-ctrl Endpoint used for controlling Wi-Fi provisioning state
custom-data http://ip:port/custom-data Optional endpoint for sending custom data (refer wifi_prov_mgr example)

Usage

python esp_prov.py --transport < mode of provisioning : softap \ ble \ console > [ Optional parameters... ]

Parameters

  • --help Print the list of options along with brief descriptions

  • --verbose, -v Sets the verbosity level of output log

  • --transport <mode>

    • Three options are available:
      • softap - for SoftAP + HTTPD based provisioning
        • Requires the device to be running in Wi-Fi SoftAP mode and hosting an HTTP server supporting specific endpoint URIs
        • The client needs to be connected to the device softAP network before running the esp_prov tool.
      • ble - for BLE based provisioning
        • Supports Linux, Windows and macOS; redirected to console if dependencies are not met
        • Assumes that the provisioning endpoints are active on the device with specific BLE service UUIDs
      • console - for debugging via console-based provisioning
        • The client->device commands are printed to STDOUT and device->client messages are accepted via STDIN.
        • This is to be used when the device is accepting provisioning commands on UART console.
  • --service_name <name> (Optional)

    • When transport mode is ble, this specifies the BLE device name to which connection is to be established for provisioned. If not provided, BLE scanning is initiated and a list of nearby devices, as seen by the host, is displayed, of which the target device can be chosen.
    • When transport mode is softap, this specifies the HTTP server hostname / IP which is running the provisioning service, on the SoftAP network of the device which is to be provisioned. This defaults to 192.168.4.1:80 if not specified
  • --ssid <AP SSID> (Optional)

    • For specifying the SSID of the Wi-Fi AP to which the device is to connect after provisioning.
    • If not provided, scanning is initiated and scan results, as seen by the device, are displayed, of which an SSID can be picked and the corresponding password specified.
  • --passphrase <AP Password> (Optional)

    • For specifying the password of the Wi-Fi AP to which the device is to connect after provisioning.
    • Only used when corresponding SSID is provided using the --ssid option
  • --sec_ver <Security version number>

    • For specifying the version of protocomm endpoint security to use. Following 3 versions are supported:
      • 0 for protocomm_security0 - No security
      • 1 for protocomm_security1 - X25519 key exchange + Authentication using Proof of Possession (PoP) + AES-CTR encryption
      • 2 for protocomm_security2 - Secure Remote Password protocol (SRP6a) + AES-GCM encryption
  • --pop <Proof of possession string> (Optional)

    • For specifying optional Proof of Possession string to use for protocomm endpoint security version 1
    • Ignored when other security versions are used
  • --sec2_username <SRP6a Username> (Optional)

    • For specifying optional username to use for protocomm endpoint security version 2
    • Ignored when other security versions are used
  • --sec2_pwd <SRP6a Password> (Optional)

    • For specifying optional password to use for protocomm endpoint security version 2
    • Ignored when other security versions are used
  • --sec2_gen_cred (Optional)

    • For generating the SRP6a credentials (salt and verifier) from the provided username and password for protocomm endpoint security version 2
    • Ignored when other security versions are used
  • --sec2_salt_len <SRP6a Salt Length> (Optional)

    • For specifying the optional SRP6a salt length to be used for generating protocomm endpoint security version 2 credentials
    • Ignored when other security versions are used and the ``--sec2_gen_cred` option is not set
  • --reset (Optional)

    • Resets internal state machine of the device and clears provisioned credentials; to be used only in case of provisioning failures
  • --reprov (Optional)

    • Resets internal state machine of the device and clears provisioned credentials; to be used only in case the device is to be provisioned again for new credentials after a previous successful provisioning
  • --custom_data <some string> (Optional) An information string can be sent to the custom-data endpoint during provisioning using this argument. (Assumes the provisioning app has an endpoint called custom-data - see provisioning/wifi_prov_mgr example for implementation details).

Example Usage

Please refer to the README.md file with the wifi_prov_mgr example present under $IDF_PATH/examples/provisioning/.

This example uses specific options of the esp_prov tool and gives an overview of simple as well as advanced usage scenarios.

Availability

For Android, a provisioning tool along with source code is available here.

Dependencies

This requires the following python libraries to run:

  • bleak
  • future
  • protobuf
  • cryptography

To install the dependency packages needed, please run the following command:

bash install.sh --enable-ttfw

Note: For troubleshooting errors with BLE transport, please refer this link.