kopia lustrzana https://github.com/espressif/esp-idf
177 wiersze
4.5 KiB
PHP
177 wiersze
4.5 KiB
PHP
.. This file gets included from other .rst files in this folder.
|
||
.. It contains target-specific snippets.
|
||
.. Comments and '---' lines act as delimiters.
|
||
..
|
||
.. This is necessary mainly because RST doesn't support substitutions
|
||
.. (defined in RST, not in Python) inside code blocks. If that is ever implemented,
|
||
.. These code blocks can be moved back to the main .rst files, with target-specific
|
||
.. file names being replaced by substitutions.
|
||
|
||
|
||
.. run-openocd
|
||
|
||
::
|
||
|
||
openocd -f board/esp32-wrover-kit-3.3v.cfg
|
||
|
||
.. |run-openocd-device-name| replace:: 板载 ESP32-WROOM-32 模组的 ESP-WROVER-KIT 开发板
|
||
|
||
---
|
||
|
||
.. run-openocd-output
|
||
|
||
::
|
||
|
||
user-name@computer-name:~/esp/esp-idf$ openocd -f board/esp32-wrover-kit-3.3v.cfg
|
||
Open On-Chip Debugger v0.10.0-esp32-20190708 (2019-07-08-11:04)
|
||
Licensed under GNU GPL v2
|
||
For bug reports, read
|
||
http://openocd.org/doc/doxygen/bugs.html
|
||
none separate
|
||
adapter speed: 20000 kHz
|
||
force hard breakpoints
|
||
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
|
||
Info : clock speed 20000 kHz
|
||
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
|
||
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
|
||
Info : esp32: Debug controller was reset (pwrstat=0x5F, after clear 0x0F).
|
||
Info : esp32: Core was reset (pwrstat=0x5F, after clear 0x0F).
|
||
|
||
.. |run-openocd-cfg-file-err| replace:: ``Can't find board/esp32-wrover-kit-3.3v.cfg``
|
||
|
||
---
|
||
|
||
.. run-openocd-upload
|
||
|
||
::
|
||
|
||
openocd -f board/esp32-wrover-kit-3.3v.cfg -c "program_esp filename.bin 0x10000 verify exit"
|
||
|
||
---
|
||
|
||
.. run-openocd-src-linux
|
||
|
||
.. code-block:: bash
|
||
|
||
src/openocd -f board/esp32-wrover-kit-3.3v.cfg
|
||
|
||
---
|
||
|
||
.. run-openocd-src-win
|
||
|
||
.. code-block:: batch
|
||
|
||
src\openocd -f board\esp32-wrover-kit-3.3v.cfg
|
||
|
||
---
|
||
|
||
.. idf-py-openocd-default-cfg
|
||
|
||
.. |idf-py-def-cfg| replace:: ``-f board/esp32-wrover-kit-3.3v.cfg``
|
||
|
||
---
|
||
|
||
.. run-openocd-appimage-offset
|
||
|
||
::
|
||
|
||
openocd -f board/esp32-wrover-kit-3.3v.cfg -c "init; halt; esp appimage_offset 0x210000"
|
||
|
||
---
|
||
|
||
.. openocd-cfg-files
|
||
|
||
.. list-table:: ESP32 相关的 OpenOCD 配置文件
|
||
:widths: 25 75
|
||
:header-rows: 1
|
||
|
||
* - 名字
|
||
- 描述
|
||
* - ``board/esp32-wrover-kit-3.3v.cfg``
|
||
- 板载 3.3 V 模组(ESP32-WROOM-32,ESP32-WROVER-B,ESP32-WROVER-E)的 ESP-WROVER-KIT 开发板配置文件
|
||
* - ``board/esp32-wrover-kit-1.8v.cfg``
|
||
- 板载 1.8 V 模组(ESP32-WROVER)的 ESP-WROVER-KIT 开发板配置文件
|
||
* - ``board/esp32-ethernet-kit-3.3v.cfg``
|
||
- 板载 3.3 V 模组(ESP32-WROVER-B / ESP32-WROVER-E)的 ESP-Ethernet-KIT 开发板配置文件
|
||
* - ``target/esp32.cfg``
|
||
- ESP32 的目标配置文件,可以和某个 ``interface/`` 下的配置文件一同使用
|
||
* - ``target/esp32-solo-1.cfg``
|
||
- ESP32-SOLO-1 模组的目标配置文件,和 ``esp32.cfg`` 的差别在于它仅配置一个 CPU
|
||
* - ``interface/ftdi/esp32_devkitj_v1.cfg``
|
||
- 适用于 ESP-WROVER-KIT 和 ESP-Prog 的 JTAG 适配器配置文件
|
||
|
||
---
|
||
|
||
.. openocd-target-specific-config-vars
|
||
|
||
.. list-table:: ESP32 相关的 OpenOCD 变量
|
||
:widths: 25 75
|
||
:header-rows: 1
|
||
|
||
* - 名字
|
||
- 描述
|
||
* - ``ESP32_FLASH_VOLTAGE``
|
||
- 如果 ESP32 模组集成的是 1.8 V 的 flash,将该变量设置为 ``1.8``,详情请参考 :ref:`jtag-debugging-tip-code-flash-voltage`
|
||
* - ``ESP32_ONLYCPU``
|
||
- 对于多核芯片,将该值设置为 ``1`` 可以仅启用单核调试功能
|
||
|
||
---
|
||
|
||
.. jtag-pins
|
||
|
||
.. list-table:: ESP32 管脚和 JTAG 接口信号
|
||
:widths: 25 75
|
||
:header-rows: 1
|
||
|
||
* - ESP32 管脚
|
||
- JTAG 信号
|
||
* - MTDO / GPIO15
|
||
- TDO
|
||
* - MTDI / GPIO12
|
||
- TDI
|
||
* - MTCK / GPIO13
|
||
- TCK
|
||
* - MTMS / GPIO14
|
||
- TMS
|
||
* - GND
|
||
- GND
|
||
|
||
---
|
||
|
||
.. run-openocd-d3
|
||
|
||
::
|
||
|
||
openocd -l openocd_log.txt -d3 -f board/esp32-wrover-kit-3.3v.cfg
|
||
|
||
---
|
||
|
||
.. run-openocd-d3-tee
|
||
|
||
::
|
||
|
||
openocd -d3 -f board/esp32-wrover-kit-3.3v.cfg 2>&1 | tee openocd.log
|
||
|
||
---
|
||
|
||
.. run-gdb-remotelog
|
||
|
||
::
|
||
|
||
xtensa-esp32-elf-gdb -ex "set remotelogfile gdb_log.txt" <all other options>
|
||
|
||
---
|
||
|
||
.. devkit-defs
|
||
|
||
.. |devkit-name| replace:: ESP-WROVER-KIT
|
||
.. |devkit-name-with-link| replace:: :doc:`ESP-WROVER-KIT 开发板 <../../hw-reference/index>`
|
||
|
||
---
|
||
|
||
.. devkit-hw-config
|
||
|
||
* 根据 :doc:`../../hw-reference/esp32/get-started-wrover-kit` 文档中 :ref:`get-started-esp-wrover-kit-v4.1-setup-options` 章节所描述的信息,设置 JP8 便可以启用 JTAG 功能。
|
||
|
||
---
|