mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/components/esp_serial_slave_link/essl_spi.c

490 wiersze
18 KiB
C
Czysty Wina Historia

// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <string.h>
#include <sys/param.h>
#include "esp_log.h"
#include "esp_check.h"
#include "driver/spi_master.h"
#include "driver/periph_ctrl.h"
#include "essl_internal.h"
#include "essl_spi.h"
#include "essl_spi/esp32s2_defs.h"
/**
* Initialise device function list of SPI by this macro.
*/
#define ESSL_SPI_DEFAULT_DEV_FUNC() (essl_dev_t) {\
.get_tx_buffer_num = essl_spi_get_tx_buffer_num,\
.update_tx_buffer_num = essl_spi_update_tx_buffer_num,\
.get_rx_data_size = essl_spi_get_rx_data_size,\
.update_rx_data_size = essl_spi_update_rx_data_size,\
.send_packet = essl_spi_send_packet,\
.get_packet = essl_spi_get_packet,\
.write_reg = essl_spi_write_reg,\
.read_reg = essl_spi_read_reg,\
}
static const char TAG[] = "essl_spi";
typedef struct {
spi_device_handle_t spi; // Pointer to SPI device handle.
/* Master TX, Slave RX */
struct {
size_t sent_buf_num; // Number of TX buffers that has been sent out by the master.
size_t slave_rx_buf_num; // Number of RX buffers laoded by the slave.
uint16_t tx_buffer_size; /* Buffer size for Master TX / Slave RX direction.
* Data with length within this size will still be regarded as one buffer.
* E.g. 10 bytes data costs 2 buffers if the size is 8 bytes per buffer. */
uint8_t tx_sync_reg; // The pre-negotiated register ID for Master-TX-SLAVE-RX synchronization. 1 word (4 Bytes) will be reserved for the synchronization.
} master_out;
/* Master RX, Slave TX */
struct {
size_t received_bytes; // Number of the RX bytes that has been received by the Master.
size_t slave_tx_bytes; // Number of the TX bytes that has been loaded by the Slave
uint8_t rx_sync_reg; // The pre-negotiated register ID for Master-RX-SLAVE-TX synchronization. 1 word (4 Bytes) will be reserved for the synchronization.
} master_in;
} essl_spi_context_t;
static uint16_t get_hd_command(uint16_t cmd_i, uint32_t flags)
{
//have no prefixes
if (cmd_i == CMD_HD_EN_QPI_REG) return cmd_i;
//doesn't support 4-line commands
if(flags & SPI_TRANS_MODE_QIO && flags & SPI_TRANS_MODE_DIOQIO_ADDR &&
(cmd_i == CMD_HD_WR_END_REG || cmd_i == CMD_HD_INT0_REG ||
cmd_i == CMD_HD_INT1_REG || cmd_i == CMD_HD_INT2_REG)) {
//the transaction will be sent in corresponding 1/2/4 bit mode, without address and data.
//the CMD will have no 0xA- prefix
return cmd_i;
}
if (flags & SPI_TRANS_MODE_DIO) {
if (flags & SPI_TRANS_MODE_DIOQIO_ADDR) {
return cmd_i | CMD_HD_DIO_MODE;
} else {
return cmd_i | CMD_HD_DOUT_MODE;
}
} else if (flags & SPI_TRANS_MODE_QIO) {
if (flags & SPI_TRANS_MODE_DIOQIO_ADDR) {
return cmd_i | CMD_HD_QIO_MODE;
} else {
return cmd_i | CMD_HD_QOUT_MODE;
}
}
return cmd_i | CMD_HD_ONEBIT_MODE;
}
static int get_hd_dummy_bits(uint32_t flags)
{
//dummy is always 4 cycles when dual or quad mode is enabled. Otherwise 8 cycles in normal mode.
if (flags & (SPI_TRANS_MODE_DIO | SPI_TRANS_MODE_QIO)) {
return 4;
} else {
return 8;
}
}
esp_err_t essl_spi_rdbuf(spi_device_handle_t spi, uint8_t *out_data, int addr, int len, uint32_t flags)
{
spi_transaction_ext_t t = {
.base = {
.cmd = get_hd_command(CMD_HD_RDBUF_REG, flags),
.addr = addr % 72,
.rxlength = len * 8,
.rx_buffer = out_data,
.flags = flags | SPI_TRANS_VARIABLE_DUMMY,
},
.dummy_bits = get_hd_dummy_bits(flags),
};
return spi_device_transmit(spi, (spi_transaction_t*)&t);
}
esp_err_t essl_spi_rdbuf_polling(spi_device_handle_t spi, uint8_t *out_data, int addr, int len, uint32_t flags)
{
spi_transaction_ext_t t = {
.base = {
.cmd = get_hd_command(CMD_HD_RDBUF_REG, flags),
.addr = addr % 72,
.rxlength = len * 8,
.rx_buffer = out_data,
.flags = flags | SPI_TRANS_VARIABLE_DUMMY,
},
.dummy_bits = get_hd_dummy_bits(flags),
};
return spi_device_polling_transmit(spi, (spi_transaction_t*)&t);
}
esp_err_t essl_spi_wrbuf(spi_device_handle_t spi, const uint8_t *data, int addr, int len, uint32_t flags)
{
spi_transaction_ext_t t = {
.base = {
.cmd = get_hd_command(CMD_HD_WRBUF_REG, flags),
.addr = addr % 72,
.length = len * 8,
.tx_buffer = data,
.flags = flags | SPI_TRANS_VARIABLE_DUMMY,
},
.dummy_bits = get_hd_dummy_bits(flags),
};
return spi_device_transmit(spi, (spi_transaction_t*)&t);
}
esp_err_t essl_spi_wrbuf_polling(spi_device_handle_t spi, const uint8_t *data, int addr, int len, uint32_t flags)
{
spi_transaction_ext_t t = {
.base = {
.cmd = get_hd_command(CMD_HD_WRBUF_REG, flags),
.addr = addr % 72,
.length = len * 8,
.tx_buffer = data,
.flags = flags | SPI_TRANS_VARIABLE_DUMMY,
},
.dummy_bits = get_hd_dummy_bits(flags),
};
return spi_device_polling_transmit(spi, (spi_transaction_t*)&t);
}
esp_err_t essl_spi_rddma_seg(spi_device_handle_t spi, uint8_t *out_data, int seg_len, uint32_t flags)
{
spi_transaction_ext_t t = {
.base = {
.cmd = get_hd_command(CMD_HD_RDDMA_REG, flags),
.rxlength = seg_len * 8,
.rx_buffer = out_data,
.flags = flags | SPI_TRANS_VARIABLE_DUMMY,
},
.dummy_bits = get_hd_dummy_bits(flags),
};
return spi_device_transmit(spi, (spi_transaction_t*)&t);
}
esp_err_t essl_spi_rddma_done(spi_device_handle_t spi, uint32_t flags)
{
spi_transaction_t end_t = {
.cmd = get_hd_command(CMD_HD_INT0_REG, flags),
.flags = flags,
};
return spi_device_transmit(spi, &end_t);
}
esp_err_t essl_spi_rddma(spi_device_handle_t spi, uint8_t *out_data, int len, int seg_len, uint32_t flags)
{
if (!esp_ptr_dma_capable(out_data) || ((intptr_t)out_data % 4) != 0) {
return ESP_ERR_INVALID_ARG;
}
seg_len = (seg_len > 0)? seg_len : len;
uint8_t* read_ptr = out_data;
esp_err_t ret = ESP_OK;
while (len > 0) {
int send_len = MIN(seg_len, len);
ret = essl_spi_rddma_seg(spi, read_ptr, send_len, flags);
if (ret != ESP_OK) return ret;
len -= send_len;
read_ptr += send_len;
}
return essl_spi_rddma_done(spi, flags);
}
esp_err_t essl_spi_wrdma_seg(spi_device_handle_t spi, const uint8_t *data, int seg_len, uint32_t flags)
{
spi_transaction_ext_t t = {
.base = {
.cmd = get_hd_command(CMD_HD_WRDMA_REG, flags),
.length = seg_len * 8,
.tx_buffer = data,
.flags = flags | SPI_TRANS_VARIABLE_DUMMY,
},
.dummy_bits = get_hd_dummy_bits(flags),
};
return spi_device_transmit(spi, (spi_transaction_t*)&t);
}
esp_err_t essl_spi_wrdma_done(spi_device_handle_t spi, uint32_t flags)
{
spi_transaction_t end_t = {
.cmd = get_hd_command(CMD_HD_WR_END_REG, flags),
.flags = flags,
};
return spi_device_transmit(spi, &end_t);
}
esp_err_t essl_spi_wrdma(spi_device_handle_t spi, const uint8_t *data, int len, int seg_len, uint32_t flags)
{
if (!esp_ptr_dma_capable(data)) {
return ESP_ERR_INVALID_ARG;
}
seg_len = (seg_len > 0)? seg_len : len;
while (len > 0) {
int send_len = MIN(seg_len, len);
esp_err_t ret = essl_spi_wrdma_seg(spi, data, send_len, flags);
if (ret != ESP_OK) return ret;
len -= send_len;
data += send_len;
}
return essl_spi_wrdma_done(spi, flags);
}
esp_err_t essl_spi_int(spi_device_handle_t spi, int int_n, uint32_t flags)
{
spi_transaction_t end_t = {
.cmd = get_hd_command(CMD_HD_INT0_REG + int_n, flags),
.flags = flags,
};
return spi_device_transmit(spi, &end_t);
}
//------------------------------------ APPEND MODE ----------------------------------//
static uint32_t essl_spi_get_rx_data_size(void *arg);
static esp_err_t essl_spi_update_rx_data_size(void *arg, uint32_t wait_ms);
static uint32_t essl_spi_get_tx_buffer_num(void *arg);
static esp_err_t essl_spi_update_tx_buffer_num(void *arg, uint32_t wait_ms);
esp_err_t essl_spi_init_dev(essl_handle_t *out_handle, const essl_spi_config_t *init_config)
{
ESP_RETURN_ON_FALSE(init_config->spi, ESP_ERR_INVALID_STATE, TAG, "Check SPI initialization first");
ESP_RETURN_ON_FALSE(init_config->tx_sync_reg <= (SOC_SPI_MAXIMUM_BUFFER_SIZE - 1) * 4, ESP_ERR_INVALID_ARG, TAG, "GPSPI supports %d-byte-width internal registers", SOC_SPI_MAXIMUM_BUFFER_SIZE);
ESP_RETURN_ON_FALSE(init_config->rx_sync_reg <= (SOC_SPI_MAXIMUM_BUFFER_SIZE - 1) * 4, ESP_ERR_INVALID_ARG, TAG, "GPSPI supports %d-byte-width internal registers", SOC_SPI_MAXIMUM_BUFFER_SIZE);
ESP_RETURN_ON_FALSE(init_config->tx_sync_reg != init_config->rx_sync_reg, ESP_ERR_INVALID_ARG, TAG, "Should use different word of registers for synchronization");
essl_spi_context_t *context = calloc(1, sizeof(essl_spi_context_t));
essl_dev_t *dev = calloc(1, sizeof(essl_dev_t));
if (!context || !dev) {
free(context);
free(dev);
return ESP_ERR_NO_MEM;
}
*context = (essl_spi_context_t) {
.spi = *init_config->spi,
.master_out.tx_buffer_size = init_config->tx_buf_size,
.master_out.tx_sync_reg = init_config->tx_sync_reg,
.master_in.rx_sync_reg = init_config->rx_sync_reg
};
*dev = ESSL_SPI_DEFAULT_DEV_FUNC();
dev->args = context;
*out_handle = dev;
return ESP_OK;
}
esp_err_t essl_spi_deinit_dev(essl_handle_t handle)
{
ESP_RETURN_ON_FALSE(handle, ESP_ERR_INVALID_STATE, TAG, "ESSL SPI is not in use");
free(handle->args);
free(handle);
return ESP_OK;
}
void essl_spi_reset_cnt(void *arg)
{
essl_spi_context_t *ctx = arg;
if (ctx) {
ctx->master_out.sent_buf_num = 0;
ctx->master_in.received_bytes = 0;
}
}
//------------------------------------ RX ----------------------------------//
esp_err_t essl_spi_read_reg(void *arg, uint8_t addr, uint8_t *out_value, uint32_t wait_ms)
{
essl_spi_context_t *ctx = arg;
ESP_RETURN_ON_FALSE(arg, ESP_ERR_INVALID_STATE, TAG, "Check ESSL SPI initialization first");
uint8_t reserved_1_head = ctx->master_out.tx_sync_reg < ctx->master_in.rx_sync_reg ? ctx->master_out.tx_sync_reg : ctx->master_in.rx_sync_reg;
uint8_t reserved_1_tail = reserved_1_head + 3;
uint8_t reserved_2_head = ctx->master_out.tx_sync_reg < ctx->master_in.rx_sync_reg ? ctx->master_in.rx_sync_reg : ctx->master_out.tx_sync_reg;
uint8_t reserved_2_tail = reserved_2_head + 3;
ESP_RETURN_ON_FALSE(addr < reserved_1_head || (addr > reserved_1_tail && addr < reserved_2_head) || addr > reserved_2_tail, ESP_ERR_INVALID_ARG, TAG, "Invalid address");
return essl_spi_rdbuf(ctx->spi, out_value, addr, sizeof(uint8_t), 0);
}
static uint32_t essl_spi_get_rx_data_size(void *arg)
{
essl_spi_context_t *ctx = arg;
ESP_LOGV(TAG, "slave tx buffer: %d bytes, master has read: %d bytes", ctx->master_in.slave_tx_bytes, ctx->master_in.received_bytes);
return ctx->master_in.slave_tx_bytes - ctx->master_in.received_bytes;
}
static esp_err_t essl_spi_update_rx_data_size(void *arg, uint32_t wait_ms)
{
essl_spi_context_t *ctx = arg;
uint32_t updated_size;
uint32_t previous_size;
esp_err_t ret;
ret = essl_spi_rdbuf_polling(ctx->spi, (uint8_t *)&previous_size, ctx->master_in.rx_sync_reg, sizeof(uint32_t), 0);
if (ret != ESP_OK) {
return ret;
}
/**
* Read until the last 2 reading result are same. Reason:
* SPI transaction is carried on per 1 Byte. So when Master is reading the shared register, if the
* register value is changed by Slave at this time, Master may get wrong data.
*/
while (1) {
ret = essl_spi_rdbuf_polling(ctx->spi, (uint8_t *)&updated_size, ctx->master_in.rx_sync_reg, sizeof(uint32_t), 0);
if (ret != ESP_OK) {
return ret;
}
if (updated_size == previous_size) {
ctx->master_in.slave_tx_bytes = updated_size;
ESP_LOGV(TAG, "updated: slave prepared tx buffer is: %d bytes", updated_size);
return ret;
}
previous_size = updated_size;
}
}
esp_err_t essl_spi_get_packet(void *arg, void *out_data, size_t size, uint32_t wait_ms)
{
ESP_RETURN_ON_FALSE(arg, ESP_ERR_INVALID_STATE, TAG, "Check ESSL SPI initialization first");
if (!esp_ptr_dma_capable(out_data) || ((intptr_t)out_data % 4) != 0) {
return ESP_ERR_INVALID_ARG;
}
essl_spi_context_t *ctx = arg;
esp_err_t ret;
if (essl_spi_get_rx_data_size(arg) < size) {
/**
* For realistic situation, usually there will be a large overhead (Slave will load large amount of data),
* so here we only update the Slave's TX size when the last-updated size is smaller than what Master requires.
*/
ret = essl_spi_update_rx_data_size(arg, wait_ms);
if (ret != ESP_OK) {
return ret;
}
//Slave still did not load enough size of buffer
if (essl_spi_get_rx_data_size(arg) < size) {
ESP_LOGV(TAG, "slave buffer: %d is not enough, %d is required", ctx->master_in.slave_tx_bytes, ctx->master_in.received_bytes + size);
return ESP_ERR_NOT_FOUND;
}
}
ESP_LOGV(TAG, "get_packet: size to read is: %d", size);
ret = essl_spi_rddma_seg(ctx->spi, out_data, size, 0);
if (ret != ESP_OK) {
return ret;
}
ctx->master_in.received_bytes += size;
return ESP_OK;
}
//------------------------------------ TX ----------------------------------//
esp_err_t essl_spi_write_reg(void *arg, uint8_t addr, uint8_t value, uint8_t *out_value, uint32_t wait_ms)
{
essl_spi_context_t *ctx = arg;
ESP_RETURN_ON_FALSE(arg, ESP_ERR_INVALID_STATE, TAG, "Check ESSL SPI initialization first");
uint8_t reserved_1_head = ctx->master_out.tx_sync_reg < ctx->master_in.rx_sync_reg ? ctx->master_out.tx_sync_reg : ctx->master_in.rx_sync_reg;
uint8_t reserved_1_tail = reserved_1_head + 3;
uint8_t reserved_2_head = ctx->master_out.tx_sync_reg < ctx->master_in.rx_sync_reg ? ctx->master_in.rx_sync_reg : ctx->master_out.tx_sync_reg;
uint8_t reserved_2_tail = reserved_2_head + 3;
ESP_RETURN_ON_FALSE(addr < reserved_1_head || (addr > reserved_1_tail && addr < reserved_2_head) || addr > reserved_2_tail, ESP_ERR_INVALID_ARG, TAG, "Invalid address");
ESP_RETURN_ON_FALSE(out_value == NULL, ESP_ERR_NOT_SUPPORTED, TAG, "This feature is not supported");
return essl_spi_wrbuf(ctx->spi, &value, addr, sizeof(uint8_t), 0);
}
static uint32_t essl_spi_get_tx_buffer_num(void *arg)
{
essl_spi_context_t *ctx = arg;
ESP_LOGV(TAG, "slave rx buffer: %d, master has sent: %d", ctx->master_out.slave_rx_buf_num, ctx->master_out.sent_buf_num);
return ctx->master_out.slave_rx_buf_num - ctx->master_out.sent_buf_num;
}
static esp_err_t essl_spi_update_tx_buffer_num(void *arg, uint32_t wait_ms)
{
essl_spi_context_t *ctx = arg;
uint32_t updated_num;
uint32_t previous_size;
esp_err_t ret;
ret = essl_spi_rdbuf_polling(ctx->spi, (uint8_t *)&previous_size, ctx->master_out.tx_sync_reg, sizeof(uint32_t), 0);
if (ret != ESP_OK) {
return ret;
}
/**
* Read until the last 2 reading result are same. Reason:
* SPI transaction is carried on per 1 Byte. So when Master is reading the shared register, if the
* register value is changed by Slave at this time, Master may get wrong data.
*/
while (1) {
ret = essl_spi_rdbuf_polling(ctx->spi, (uint8_t *)&updated_num, ctx->master_out.tx_sync_reg, sizeof(uint32_t), 0);
if (ret != ESP_OK) {
return ret;
}
if (updated_num == previous_size) {
ctx->master_out.slave_rx_buf_num = updated_num;
ESP_LOGV(TAG, "updated: slave prepared rx buffer: %d", updated_num);
return ret;
}
previous_size = updated_num;
}
}
esp_err_t essl_spi_send_packet(void *arg, const void *data, size_t size, uint32_t wait_ms)
{
ESP_RETURN_ON_FALSE(arg, ESP_ERR_INVALID_STATE, TAG, "Check ESSL SPI initialization first");
if (!esp_ptr_dma_capable(data)) {
return ESP_ERR_INVALID_ARG;
}
essl_spi_context_t *ctx = arg;
esp_err_t ret;
uint32_t buf_num_to_use = (size + ctx->master_out.tx_buffer_size - 1) / ctx->master_out.tx_buffer_size;
if (essl_spi_get_tx_buffer_num(arg) < buf_num_to_use) {
/**
* For realistic situation, usually there will be a large overhead (Slave will load enough number of RX buffers),
* so here we only update the Slave's RX buffer number when the last-updated number is smaller than what Master requires.
*/
ret = essl_spi_update_tx_buffer_num(arg, wait_ms);
if (ret != ESP_OK) {
return ret;
}
//Slave still did not load a sufficient amount of buffers
if (essl_spi_get_tx_buffer_num(arg) < buf_num_to_use) {
ESP_LOGV(TAG, "slave buffer: %d is not enough, %d is required", ctx->master_out.slave_rx_buf_num, ctx->master_out.sent_buf_num + buf_num_to_use);
return ESP_ERR_NOT_FOUND;
}
}
ESP_LOGV(TAG, "send_packet: size to write is: %d", size);
ret = essl_spi_wrdma_seg(ctx->spi, data, size, 0);
if (ret != ESP_OK) {
return ret;
}
ctx->master_out.sent_buf_num += buf_num_to_use;
return essl_spi_wrdma_done(ctx->spi, 0);
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik