esp-idf/components/protocomm/include/transports/protocomm_ble.h

132 wiersze
3.5 KiB
C

/*
* SPDX-FileCopyrightText: 2018-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <protocomm.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* BLE device name cannot be larger than this value
* 31 bytes (max scan response size) - 1 byte (length) - 1 byte (type) = 29 bytes
*/
#define MAX_BLE_DEVNAME_LEN 29
#define BLE_UUID128_VAL_LENGTH 16
/**
* Theoretically, the limit for max manufacturer length remains same as BLE
* device name i.e. 31 bytes (max scan response size) - 1 byte (length) - 1
* byte (type) = 29 bytes
* However, manufacturer data goes along with BLE device name in scan response.
* So, it is important to understand the actual length should be smaller than
* (29 - (BLE device name length) - 2). */
#define MAX_BLE_MANUFACTURER_DATA_LEN 29
/**
* @brief This structure maps handler required by protocomm layer to
* UUIDs which are used to uniquely identify BLE characteristics
* from a smartphone or a similar client device.
*/
typedef struct name_uuid {
/**
* Name of the handler, which is passed to protocomm layer
*/
const char *name;
/**
* UUID to be assigned to the BLE characteristic which is
* mapped to the handler
*/
uint16_t uuid;
} protocomm_ble_name_uuid_t;
/**
* @brief Config parameters for protocomm BLE service
*/
typedef struct protocomm_ble_config {
/**
* BLE device name being broadcast at the time of provisioning
*/
char device_name[MAX_BLE_DEVNAME_LEN];
/**
* 128 bit UUID of the provisioning service
*/
uint8_t service_uuid[BLE_UUID128_VAL_LENGTH];
/**
* BLE device manufacturer data pointer in advertisement
*/
uint8_t *manufacturer_data;
/**
* BLE device manufacturer data length in advertisement
*/
ssize_t manufacturer_data_len;
/**
* Number of entries in the Name-UUID lookup table
*/
ssize_t nu_lookup_count;
/**
* Pointer to the Name-UUID lookup table
*/
protocomm_ble_name_uuid_t *nu_lookup;
/**
* BLE bonding
*/
unsigned ble_bonding:1;
/**
* BLE security flag
*/
unsigned ble_sm_sc:1;
} protocomm_ble_config_t;
/**
* @brief Start Bluetooth Low Energy based transport layer for provisioning
*
* Initialize and start required BLE service for provisioning. This includes
* the initialization for characteristics/service for BLE.
*
* @param[in] pc Protocomm instance pointer obtained from protocomm_new()
* @param[in] config Pointer to config structure for initializing BLE
*
* @return
* - ESP_OK : Success
* - ESP_FAIL : Simple BLE start error
* - ESP_ERR_NO_MEM : Error allocating memory for internal resources
* - ESP_ERR_INVALID_STATE : Error in ble config
* - ESP_ERR_INVALID_ARG : Null arguments
*/
esp_err_t protocomm_ble_start(protocomm_t *pc, const protocomm_ble_config_t *config);
/**
* @brief Stop Bluetooth Low Energy based transport layer for provisioning
*
* Stops service/task responsible for BLE based interactions for provisioning
*
* @note You might want to optionally reclaim memory from Bluetooth.
* Refer to the documentation of `esp_bt_mem_release` in that case.
*
* @param[in] pc Same protocomm instance that was passed to protocomm_ble_start()
*
* @return
* - ESP_OK : Success
* - ESP_FAIL : Simple BLE stop error
* - ESP_ERR_INVALID_ARG : Null / incorrect protocomm instance
*/
esp_err_t protocomm_ble_stop(protocomm_t *pc);
#ifdef __cplusplus
}
#endif