mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/components/driver/sdmmc_host.c

721 wiersze
23 KiB
C
Czysty Wina Historia

/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdbool.h>
#include <stddef.h>
#include <sys/param.h>
#include "esp_log.h"
#include "esp_intr_alloc.h"
#include "soc/soc_caps.h"
#include "soc/soc_pins.h"
#include "soc/gpio_periph.h"
#include "esp_rom_gpio.h"
#include "esp_rom_sys.h"
#include "driver/gpio.h"
#include "driver/sdmmc_host.h"
#include "esp_private/periph_ctrl.h"
#include "sdmmc_private.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "soc/sdmmc_periph.h"
#include "hal/gpio_hal.h"
#define SDMMC_EVENT_QUEUE_LENGTH 32
static void sdmmc_isr(void* arg);
static void sdmmc_host_dma_init(void);
static const char* TAG = "sdmmc_periph";
static intr_handle_t s_intr_handle;
static QueueHandle_t s_event_queue;
static SemaphoreHandle_t s_io_intr_event;
static size_t s_slot_width[2] = {1, 1};
/* The following definitions are used to simplify GPIO configuration in the driver,
* whether IOMUX or GPIO Matrix is used by the chip.
* Two simple "APIs" are provided to the driver code:
* - configure_pin(name, slot, mode): Configures signal "name" for the given slot and mode.
* - GPIO_NUM(slot, name): Returns the GPIO number of signal "name" for the given slot.
*
* To make this work, configure_pin is defined as a macro that picks the parameters required
* for configuring GPIO matrix or IOMUX from relevant arrays, and passes them to either of
* configure_pin_gpio_matrix, configure_pin_iomux functions.
* Likewise, GPIO_NUM is a macro that picks the pin number from one of the two structures.
*
* Macros are used rather than inline functions to look up members of different structures
* with same names. E.g. the number of pin d3 is obtained either from .d3 member of
* sdmmc_slot_gpio_num array (for IOMUX) or from .d3 member of s_sdmmc_slot_gpio_num array
* (for GPIO matrix).
*/
#ifdef SOC_SDMMC_USE_GPIO_MATRIX
static void configure_pin_gpio_matrix(uint8_t gpio_num, uint8_t gpio_matrix_sig, gpio_mode_t mode, const char* name);
#define configure_pin(name, slot, mode) \
configure_pin_gpio_matrix(s_sdmmc_slot_gpio_num[slot].name, sdmmc_slot_gpio_sig[slot].name, mode, #name)
static sdmmc_slot_io_info_t s_sdmmc_slot_gpio_num[SOC_SDMMC_NUM_SLOTS];
#define GPIO_NUM(slot, name) s_sdmmc_slot_gpio_num[slot].name
#elif SOC_SDMMC_USE_IOMUX
static void configure_pin_iomux(uint8_t gpio_num);
#define configure_pin(name, slot, mode) configure_pin_iomux(sdmmc_slot_gpio_num[slot].name)
#define GPIO_NUM(slot, name) sdmmc_slot_gpio_num[slot].name
#endif // SOC_SDMMC_USE_GPIO_MATRIX
static esp_err_t sdmmc_host_pullup_en_internal(int slot, int width);
void sdmmc_host_reset(void)
{
// Set reset bits
SDMMC.ctrl.controller_reset = 1;
SDMMC.ctrl.dma_reset = 1;
SDMMC.ctrl.fifo_reset = 1;
// Wait for the reset bits to be cleared by hardware
while (SDMMC.ctrl.controller_reset || SDMMC.ctrl.fifo_reset || SDMMC.ctrl.dma_reset) {
;
}
}
/* We have two clock divider stages:
* - one is the clock generator which drives SDMMC peripheral,
* it can be configured using SDMMC.clock register. It can generate
* frequencies 160MHz/(N + 1), where 0 < N < 16, I.e. from 10 to 80 MHz.
* - 4 clock dividers inside SDMMC peripheral, which can divide clock
* from the first stage by 2 * M, where 0 < M < 255
* (they can also be bypassed).
*
* For cards which aren't UHS-1 or UHS-2 cards, which we don't support,
* maximum bus frequency in high speed (HS) mode is 50 MHz.
* Note: for non-UHS-1 cards, HS mode is optional.
* Default speed (DS) mode is mandatory, it works up to 25 MHz.
* Whether the card supports HS or not can be determined using TRAN_SPEED
* field of card's CSD register.
*
* 50 MHz can not be obtained exactly, closest we can get is 53 MHz.
*
* The first stage divider is set to the highest possible value for the given
* frequency, and the the second stage dividers are used if division factor
* is >16.
*
* Of the second stage dividers, div0 is used for card 0, and div1 is used
* for card 1.
*/
static void sdmmc_host_set_clk_div(int div)
{
// Set frequency to 160MHz / div
// div = p + 1
// duty cycle = (h + 1)/(p + 1) (should be = 1/2)
assert (div > 1 && div <= 16);
int p = div - 1;
int h = div / 2 - 1;
SDMMC.clock.div_factor_p = p;
SDMMC.clock.div_factor_h = h;
SDMMC.clock.div_factor_m = p;
// Make sure 160 MHz source clock is used
#if SOC_SDMMC_SUPPORT_XTAL_CLOCK
SDMMC.clock.clk_sel = 1;
#endif
#if SOC_SDMMC_USE_GPIO_MATRIX
// 90 degree phase on input and output clocks
const int inout_clock_phase = 1;
#else
// 180 degree phase on input and output clocks
const int inout_clock_phase = 4;
#endif
// Set phases for in/out clocks
SDMMC.clock.phase_dout = inout_clock_phase;
SDMMC.clock.phase_din = inout_clock_phase;
SDMMC.clock.phase_core = 0;
// Wait for the clock to propagate
esp_rom_delay_us(10);
}
static void sdmmc_host_input_clk_disable(void)
{
SDMMC.clock.val = 0;
}
static void sdmmc_host_clock_update_command(int slot)
{
// Clock update command (not a real command; just updates CIU registers)
sdmmc_hw_cmd_t cmd_val = {
.card_num = slot,
.update_clk_reg = 1,
.wait_complete = 1
};
bool repeat = true;
while(repeat) {
sdmmc_host_start_command(slot, cmd_val, 0);
while (true) {
// Sending clock update command to the CIU can generate HLE error.
// According to the manual, this is okay and we must retry the command.
if (SDMMC.rintsts.hle) {
SDMMC.rintsts.hle = 1;
repeat = true;
break;
}
// When the command is accepted by CIU, start_command bit will be
// cleared in SDMMC.cmd register.
if (SDMMC.cmd.start_command == 0) {
repeat = false;
break;
}
}
}
}
esp_err_t sdmmc_host_set_card_clk(int slot, uint32_t freq_khz)
{
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
const int clk40m = 40000;
// Disable clock first
SDMMC.clkena.cclk_enable &= ~BIT(slot);
sdmmc_host_clock_update_command(slot);
int host_div = 0; /* clock divider of the host (SDMMC.clock) */
int card_div = 0; /* 1/2 of card clock divider (SDMMC.clkdiv) */
// Calculate new dividers
if (freq_khz >= SDMMC_FREQ_HIGHSPEED) {
host_div = 4; // 160 MHz / 4 = 40 MHz
card_div = 0;
} else if (freq_khz == SDMMC_FREQ_DEFAULT) {
host_div = 8; // 160 MHz / 8 = 20 MHz
card_div = 0;
} else if (freq_khz == SDMMC_FREQ_PROBING) {
host_div = 10; // 160 MHz / 10 / (20 * 2) = 400 kHz
card_div = 20;
} else {
host_div = 2;
card_div = (clk40m + freq_khz * 2 - 1) / (freq_khz * 2); // round up
}
ESP_LOGD(TAG, "slot=%d host_div=%d card_div=%d freq=%dkHz",
slot, host_div, card_div,
2 * APB_CLK_FREQ / host_div / ((card_div == 0) ? 1 : card_div * 2) / 1000);
// Program CLKDIV and CLKSRC, send them to the CIU
switch(slot) {
case 0:
SDMMC.clksrc.card0 = 0;
SDMMC.clkdiv.div0 = card_div;
break;
case 1:
SDMMC.clksrc.card1 = 1;
SDMMC.clkdiv.div1 = card_div;
break;
}
sdmmc_host_set_clk_div(host_div);
sdmmc_host_clock_update_command(slot);
// Re-enable clocks
SDMMC.clkena.cclk_enable |= BIT(slot);
SDMMC.clkena.cclk_low_power |= BIT(slot);
sdmmc_host_clock_update_command(slot);
// set data timeout
const uint32_t data_timeout_ms = 100;
uint32_t data_timeout_cycles = data_timeout_ms * freq_khz;
const uint32_t data_timeout_cycles_max = 0xffffff;
if (data_timeout_cycles > data_timeout_cycles_max) {
data_timeout_cycles = data_timeout_cycles_max;
}
SDMMC.tmout.data = data_timeout_cycles;
// always set response timeout to highest value, it's small enough anyway
SDMMC.tmout.response = 255;
return ESP_OK;
}
esp_err_t sdmmc_host_start_command(int slot, sdmmc_hw_cmd_t cmd, uint32_t arg) {
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if ((SDMMC.cdetect.cards & BIT(slot)) != 0) {
return ESP_ERR_NOT_FOUND;
}
if (cmd.data_expected && cmd.rw && (SDMMC.wrtprt.cards & BIT(slot)) != 0) {
return ESP_ERR_INVALID_STATE;
}
while (SDMMC.cmd.start_command == 1) {
;
}
SDMMC.cmdarg = arg;
cmd.card_num = slot;
cmd.start_command = 1;
SDMMC.cmd = cmd;
return ESP_OK;
}
esp_err_t sdmmc_host_init(void)
{
if (s_intr_handle) {
return ESP_ERR_INVALID_STATE;
}
periph_module_reset(PERIPH_SDMMC_MODULE);
periph_module_enable(PERIPH_SDMMC_MODULE);
// Enable clock to peripheral. Use smallest divider first.
sdmmc_host_set_clk_div(2);
// Reset
sdmmc_host_reset();
ESP_LOGD(TAG, "peripheral version %"PRIx32", hardware config %08"PRIx32, SDMMC.verid, SDMMC.hcon);
// Clear interrupt status and set interrupt mask to known state
SDMMC.rintsts.val = 0xffffffff;
SDMMC.intmask.val = 0;
SDMMC.ctrl.int_enable = 0;
// Allocate event queue
s_event_queue = xQueueCreate(SDMMC_EVENT_QUEUE_LENGTH, sizeof(sdmmc_event_t));
if (!s_event_queue) {
return ESP_ERR_NO_MEM;
}
s_io_intr_event = xSemaphoreCreateBinary();
if (!s_io_intr_event) {
vQueueDelete(s_event_queue);
s_event_queue = NULL;
return ESP_ERR_NO_MEM;
}
// Attach interrupt handler
esp_err_t ret = esp_intr_alloc(ETS_SDIO_HOST_INTR_SOURCE, 0, &sdmmc_isr, s_event_queue, &s_intr_handle);
if (ret != ESP_OK) {
vQueueDelete(s_event_queue);
s_event_queue = NULL;
vSemaphoreDelete(s_io_intr_event);
s_io_intr_event = NULL;
return ret;
}
// Enable interrupts
SDMMC.intmask.val =
SDMMC_INTMASK_CD |
SDMMC_INTMASK_CMD_DONE |
SDMMC_INTMASK_DATA_OVER |
SDMMC_INTMASK_RCRC | SDMMC_INTMASK_DCRC |
SDMMC_INTMASK_RTO | SDMMC_INTMASK_DTO | SDMMC_INTMASK_HTO |
SDMMC_INTMASK_SBE | SDMMC_INTMASK_EBE |
SDMMC_INTMASK_RESP_ERR | SDMMC_INTMASK_HLE; //sdio is enabled only when use.
SDMMC.ctrl.int_enable = 1;
// Disable generation of Busy Clear Interrupt
SDMMC.cardthrctl.busy_clr_int_en = 0;
// Enable DMA
sdmmc_host_dma_init();
// Initialize transaction handler
ret = sdmmc_host_transaction_handler_init();
if (ret != ESP_OK) {
vQueueDelete(s_event_queue);
s_event_queue = NULL;
vSemaphoreDelete(s_io_intr_event);
s_io_intr_event = NULL;
esp_intr_free(s_intr_handle);
s_intr_handle = NULL;
return ret;
}
return ESP_OK;
}
#ifdef SOC_SDMMC_USE_IOMUX
static void configure_pin_iomux(uint8_t gpio_num)
{
const int sdmmc_func = 3;
const int drive_strength = 3;
assert(gpio_num != (uint8_t) GPIO_NUM_NC);
gpio_pulldown_dis(gpio_num);
uint32_t reg = GPIO_PIN_MUX_REG[gpio_num];
assert(reg != UINT32_MAX);
PIN_INPUT_ENABLE(reg);
gpio_hal_iomux_func_sel(reg, sdmmc_func);
PIN_SET_DRV(reg, drive_strength);
}
#elif SOC_SDMMC_USE_GPIO_MATRIX
static void configure_pin_gpio_matrix(uint8_t gpio_num, uint8_t gpio_matrix_sig, gpio_mode_t mode, const char* name)
{
assert (gpio_num != (uint8_t) GPIO_NUM_NC);
ESP_LOGD(TAG, "using GPIO%d as %s pin", gpio_num, name);
gpio_reset_pin(gpio_num);
gpio_set_direction(gpio_num, mode);
gpio_pulldown_dis(gpio_num);
if (mode == GPIO_MODE_INPUT || mode == GPIO_MODE_INPUT_OUTPUT) {
esp_rom_gpio_connect_in_signal(gpio_num, gpio_matrix_sig, false);
}
if (mode == GPIO_MODE_OUTPUT || mode == GPIO_MODE_INPUT_OUTPUT) {
esp_rom_gpio_connect_out_signal(gpio_num, gpio_matrix_sig, false, false);
}
}
#endif // SOC_SDMMC_USE_{IOMUX,GPIO_MATRIX}
esp_err_t sdmmc_host_init_slot(int slot, const sdmmc_slot_config_t* slot_config)
{
if (!s_intr_handle) {
return ESP_ERR_INVALID_STATE;
}
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if (slot_config == NULL) {
return ESP_ERR_INVALID_ARG;
}
int gpio_cd = slot_config->cd;
int gpio_wp = slot_config->wp;
uint8_t slot_width = slot_config->width;
// Configure pins
const sdmmc_slot_info_t* slot_info = &sdmmc_slot_info[slot];
if (slot_width == SDMMC_SLOT_WIDTH_DEFAULT) {
slot_width = slot_info->width;
}
else if (slot_width > slot_info->width) {
return ESP_ERR_INVALID_ARG;
}
s_slot_width[slot] = slot_width;
#if SOC_SDMMC_USE_GPIO_MATRIX
/* Save pin configuration for this slot */
s_sdmmc_slot_gpio_num[slot].clk = slot_config->clk;
s_sdmmc_slot_gpio_num[slot].cmd = slot_config->cmd;
s_sdmmc_slot_gpio_num[slot].d0 = slot_config->d0;
/* Save d1 even in 1-line mode, it might be needed for SDIO INT line */
s_sdmmc_slot_gpio_num[slot].d1 = slot_config->d1;
if (slot_width >= 4) {
s_sdmmc_slot_gpio_num[slot].d2 = slot_config->d2;
}
/* Save d3 even for 1-line mode, as it needs to be set high */
s_sdmmc_slot_gpio_num[slot].d3 = slot_config->d3;
if (slot_width >= 8) {
s_sdmmc_slot_gpio_num[slot].d4 = slot_config->d4;
s_sdmmc_slot_gpio_num[slot].d5 = slot_config->d5;
s_sdmmc_slot_gpio_num[slot].d6 = slot_config->d6;
s_sdmmc_slot_gpio_num[slot].d7 = slot_config->d7;
}
#endif
bool pullup = slot_config->flags & SDMMC_SLOT_FLAG_INTERNAL_PULLUP;
if (pullup) {
sdmmc_host_pullup_en_internal(slot, slot_config->width);
}
configure_pin(clk, slot, GPIO_MODE_OUTPUT);
configure_pin(cmd, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d0, slot, GPIO_MODE_INPUT_OUTPUT);
if (slot_width >= 4) {
configure_pin(d1, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d2, slot, GPIO_MODE_INPUT_OUTPUT);
// Force D3 high to make slave enter SD mode.
// Connect to peripheral after width configuration.
gpio_config_t gpio_conf = {
.pin_bit_mask = BIT64(GPIO_NUM(slot, d3)),
.mode = GPIO_MODE_OUTPUT,
.pull_up_en = 0,
.pull_down_en = 0,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&gpio_conf);
gpio_set_level(GPIO_NUM(slot, d3), 1);
}
if (slot_width == 8) {
configure_pin(d4, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d5, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d6, slot, GPIO_MODE_INPUT_OUTPUT);
configure_pin(d7, slot, GPIO_MODE_INPUT_OUTPUT);
}
// SDIO slave interrupt is edge sensitive to ~(int_n | card_int | card_detect)
// set this and card_detect to high to enable sdio interrupt
esp_rom_gpio_connect_in_signal(GPIO_MATRIX_CONST_ONE_INPUT, slot_info->card_int, false);
// Set up Card Detect input
int matrix_in_cd;
if (gpio_cd != SDMMC_SLOT_NO_CD) {
ESP_LOGD(TAG, "using GPIO%d as CD pin", gpio_cd);
esp_rom_gpio_pad_select_gpio(gpio_cd);
gpio_set_direction(gpio_cd, GPIO_MODE_INPUT);
matrix_in_cd = gpio_cd;
} else {
// if not set, default to CD low (card present)
matrix_in_cd = GPIO_MATRIX_CONST_ZERO_INPUT;
}
esp_rom_gpio_connect_in_signal(matrix_in_cd, slot_info->card_detect, false);
// Set up Write Protect input
int matrix_in_wp;
if (gpio_wp != SDMMC_SLOT_NO_WP) {
ESP_LOGD(TAG, "using GPIO%d as WP pin", gpio_wp);
esp_rom_gpio_pad_select_gpio(gpio_wp);
gpio_set_direction(gpio_wp, GPIO_MODE_INPUT);
matrix_in_wp = gpio_wp;
} else {
// if not set, default to WP high (not write protected)
matrix_in_wp = GPIO_MATRIX_CONST_ONE_INPUT;
}
// WP signal is normally active low, but hardware expects
// an active-high signal, so invert it in GPIO matrix
esp_rom_gpio_connect_in_signal(matrix_in_wp, slot_info->write_protect, true);
// By default, set probing frequency (400kHz) and 1-bit bus
esp_err_t ret = sdmmc_host_set_card_clk(slot, 400);
if (ret != ESP_OK) {
return ret;
}
ret = sdmmc_host_set_bus_width(slot, 1);
if (ret != ESP_OK) {
return ret;
}
return ESP_OK;
}
esp_err_t sdmmc_host_deinit(void)
{
if (!s_intr_handle) {
return ESP_ERR_INVALID_STATE;
}
esp_intr_free(s_intr_handle);
s_intr_handle = NULL;
vQueueDelete(s_event_queue);
s_event_queue = NULL;
vQueueDelete(s_io_intr_event);
s_io_intr_event = NULL;
sdmmc_host_input_clk_disable();
sdmmc_host_transaction_handler_deinit();
periph_module_disable(PERIPH_SDMMC_MODULE);
return ESP_OK;
}
esp_err_t sdmmc_host_wait_for_event(int tick_count, sdmmc_event_t* out_event)
{
if (!out_event) {
return ESP_ERR_INVALID_ARG;
}
if (!s_event_queue) {
return ESP_ERR_INVALID_STATE;
}
int ret = xQueueReceive(s_event_queue, out_event, tick_count);
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
return ESP_OK;
}
esp_err_t sdmmc_host_set_bus_width(int slot, size_t width)
{
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if (sdmmc_slot_info[slot].width < width) {
return ESP_ERR_INVALID_ARG;
}
const uint16_t mask = BIT(slot);
if (width == 1) {
SDMMC.ctype.card_width_8 &= ~mask;
SDMMC.ctype.card_width &= ~mask;
} else if (width == 4) {
SDMMC.ctype.card_width_8 &= ~mask;
SDMMC.ctype.card_width |= mask;
// D3 was set to GPIO high to force slave into SD mode, until 4-bit mode is set
configure_pin(d3, slot, GPIO_MODE_INPUT_OUTPUT);
} else if (width == 8) {
SDMMC.ctype.card_width_8 |= mask;
// D3 was set to GPIO high to force slave into SD mode, until 4-bit mode is set
configure_pin(d3, slot, GPIO_MODE_INPUT_OUTPUT);
} else {
return ESP_ERR_INVALID_ARG;
}
ESP_LOGD(TAG, "slot=%d width=%d", slot, width);
return ESP_OK;
}
size_t sdmmc_host_get_slot_width(int slot)
{
assert( slot == 0 || slot == 1 );
return s_slot_width[slot];
}
esp_err_t sdmmc_host_set_bus_ddr_mode(int slot, bool ddr_enabled)
{
if (!(slot == 0 || slot == 1)) {
return ESP_ERR_INVALID_ARG;
}
if (s_slot_width[slot] == 8 && ddr_enabled) {
ESP_LOGW(TAG, "DDR mode with 8-bit bus width is not supported yet");
// requires reconfiguring controller clock for 2x card frequency
return ESP_ERR_NOT_SUPPORTED;
}
uint32_t mask = BIT(slot);
if (ddr_enabled) {
SDMMC.uhs.ddr |= mask;
SDMMC.emmc_ddr_reg |= mask;
} else {
SDMMC.uhs.ddr &= ~mask;
SDMMC.emmc_ddr_reg &= ~mask;
}
ESP_LOGD(TAG, "slot=%d ddr=%d", slot, ddr_enabled ? 1 : 0);
return ESP_OK;
}
static void sdmmc_host_dma_init(void)
{
SDMMC.ctrl.dma_enable = 1;
SDMMC.bmod.val = 0;
SDMMC.bmod.sw_reset = 1;
SDMMC.idinten.ni = 1;
SDMMC.idinten.ri = 1;
SDMMC.idinten.ti = 1;
}
void sdmmc_host_dma_stop(void)
{
SDMMC.ctrl.use_internal_dma = 0;
SDMMC.ctrl.dma_reset = 1;
SDMMC.bmod.fb = 0;
SDMMC.bmod.enable = 0;
}
void sdmmc_host_dma_prepare(sdmmc_desc_t* desc, size_t block_size, size_t data_size)
{
// Set size of data and DMA descriptor pointer
SDMMC.bytcnt = data_size;
SDMMC.blksiz = block_size;
SDMMC.dbaddr = desc;
// Enable everything needed to use DMA
SDMMC.ctrl.dma_enable = 1;
SDMMC.ctrl.use_internal_dma = 1;
SDMMC.bmod.enable = 1;
SDMMC.bmod.fb = 1;
sdmmc_host_dma_resume();
}
void sdmmc_host_dma_resume(void)
{
SDMMC.pldmnd = 1;
}
bool sdmmc_host_card_busy(void)
{
return SDMMC.status.data_busy == 1;
}
esp_err_t sdmmc_host_io_int_enable(int slot)
{
configure_pin(d1, slot, GPIO_MODE_INPUT_OUTPUT);
return ESP_OK;
}
esp_err_t sdmmc_host_io_int_wait(int slot, TickType_t timeout_ticks)
{
/* SDIO interrupts are negedge sensitive ones: the status bit is only set
* when first interrupt triggered.
*
* If D1 GPIO is low when entering this function, we know that interrupt
* (in SDIO sense) has occurred and we don't need to use SDMMC peripheral
* interrupt.
*/
SDMMC.intmask.sdio &= ~BIT(slot); /* Disable SDIO interrupt */
SDMMC.rintsts.sdio = BIT(slot);
if (gpio_get_level(GPIO_NUM(slot, d1)) == 0) {
return ESP_OK;
}
/* Otherwise, need to wait for an interrupt. Since D1 was high,
* SDMMC peripheral interrupt is guaranteed to trigger on negedge.
*/
xSemaphoreTake(s_io_intr_event, 0);
SDMMC.intmask.sdio |= BIT(slot); /* Re-enable SDIO interrupt */
if (xSemaphoreTake(s_io_intr_event, timeout_ticks) == pdTRUE) {
return ESP_OK;
} else {
return ESP_ERR_TIMEOUT;
}
}
/**
* @brief SDMMC interrupt handler
*
* All communication in SD protocol is driven by the master, and the hardware
* handles things like stop commands automatically.
* So the interrupt handler doesn't need to do much, we just push interrupt
* status into a queue, clear interrupt flags, and let the task currently
* doing communication figure out what to do next.
* This also applies to SDIO interrupts which are generated by the slave.
*
* Card detect interrupts pose a small issue though, because if a card is
* plugged in and out a few times, while there is no task to process
* the events, event queue can become full and some card detect events
* may be dropped. We ignore this problem for now, since the there are no other
* interesting events which can get lost due to this.
*/
static void sdmmc_isr(void* arg) {
QueueHandle_t queue = (QueueHandle_t) arg;
sdmmc_event_t event;
int higher_priority_task_awoken = pdFALSE;
uint32_t pending = SDMMC.mintsts.val & 0xFFFF;
SDMMC.rintsts.val = pending;
event.sdmmc_status = pending;
uint32_t dma_pending = SDMMC.idsts.val;
SDMMC.idsts.val = dma_pending;
event.dma_status = dma_pending & 0x1f;
if (pending != 0 || dma_pending != 0) {
xQueueSendFromISR(queue, &event, &higher_priority_task_awoken);
}
uint32_t sdio_pending = SDMMC.mintsts.sdio;
if (sdio_pending) {
// disable the interrupt (no need to clear here, this is done in sdmmc_host_io_wait_int)
SDMMC.intmask.sdio &= ~sdio_pending;
xSemaphoreGiveFromISR(s_io_intr_event, &higher_priority_task_awoken);
}
if (higher_priority_task_awoken == pdTRUE) {
portYIELD_FROM_ISR();
}
}
static esp_err_t sdmmc_host_pullup_en_internal(int slot, int width)
{
if (width > sdmmc_slot_info[slot].width) {
//in esp32 we only support 8 bit in slot 0, note this is occupied by the flash by default
return ESP_ERR_INVALID_ARG;
}
// according to the spec, the host controls the clk, we don't to pull it up here
gpio_pullup_en(GPIO_NUM(slot, cmd));
gpio_pullup_en(GPIO_NUM(slot, d0));
if (width >= 4) {
gpio_pullup_en(GPIO_NUM(slot, d1));
gpio_pullup_en(GPIO_NUM(slot, d2));
gpio_pullup_en(GPIO_NUM(slot, d3));
}
if (width == 8) {
gpio_pullup_en(GPIO_NUM(slot, d4));
gpio_pullup_en(GPIO_NUM(slot, d5));
gpio_pullup_en(GPIO_NUM(slot, d6));
gpio_pullup_en(GPIO_NUM(slot, d7));
}
return ESP_OK;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik