![]() |
||
---|---|---|
.. | ||
main | ||
CMakeLists.txt | ||
README.md | ||
pytest_hello_world_linux_compatible.py |
README.md
Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 | Linux |
---|
Hello World Example Compatible with POSIX-port
This is a version of the "Hello World" example compatible with the linux target. Just by using idf.py (--preview) set-target <target>
, it can be compiled for chip targets as well as for the FreeRTOS POSIX/Linux simulator, i.e., for running it on Linux. The applications can then be run on the chosen target.
Requirements
If you want to use this example on Linux, you need a Linux machine as host. The remaining requirements are the same requirements as for Unit Testing on Linux (using cmock), except you do not need Ruby.
How to use example
Configure the project
No special configuration is required, we also do not recommend changing configuration when compiled for the POSIX/Linux simulator as this is still in preview. If you have to configure something, use the usual IDF menuconfig:
idf.py menuconfig
Build and Flash
You can compile this example for chip targets, e.g. ESP32 and then run it by using:
idf.py set-target esp32
idf.py build
idf.py -p <port> flash monitor
If you want to build this example for the linux target and run it, use the same commands except setting the linux target and omitting the flash command:
idf.py --preview set-target linux
idf.by build
idf.py monitor
The linux target is still in preview, hence the necessary --preview
argument. Flashing can be omitted on Linux.
Example folder contents
The files in this project have the same structure as the files in the original Hello World application.
Example Output
The output is similar to the output of the original Hello World application, except that no chip information is printed and there won't be any bootloader output on the linux target.