esp-idf/components/ulp/ulp_riscv/ulp_riscv.c

221 wiersze
7.0 KiB
C

/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "sdkconfig.h"
#include "esp_attr.h"
#include "esp_err.h"
#include "esp_log.h"
#include "esp_private/esp_clk.h"
#include "ulp_riscv.h"
#include "soc/soc.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/sens_reg.h"
#include "hal/misc.h"
#include "ulp_common.h"
#include "esp_rom_sys.h"
#include "esp_check.h"
#include "esp_private/rtc_ctrl.h"
__attribute__((unused)) static const char* TAG = "ulp-riscv";
esp_err_t ulp_riscv_isr_register(intr_handler_t fn, void *arg, uint32_t mask)
{
/* Verify that the ISR callback is valid */
ESP_RETURN_ON_FALSE(fn, ESP_ERR_INVALID_ARG, TAG, "ULP RISC-V ISR is NULL");
/* Verify that the interrupt bits are valid */
if (!(mask & (RTC_CNTL_COCPU_INT_ST_M | RTC_CNTL_COCPU_TRAP_INT_ST_M))) {
ESP_LOGE(TAG, "Invalid bitmask for ULP RISC-V interrupts");
return ESP_ERR_INVALID_ARG;
}
/* Make sure we enable only the ULP interrupt bits.
* We don't want other RTC interrupts triggering this ISR.
*/
mask &= (RTC_CNTL_COCPU_INT_ST_M | RTC_CNTL_COCPU_TRAP_INT_ST_M);
/* Register the RTC ISR */
ESP_RETURN_ON_ERROR(rtc_isr_register(fn, arg, mask, 0), TAG, "rtc_isr_register() failed");
/* Enable the interrupt bits */
SET_PERI_REG_MASK(RTC_CNTL_INT_ENA_REG, mask);
return ESP_OK;
}
esp_err_t ulp_riscv_isr_deregister(intr_handler_t fn, void *arg, uint32_t mask)
{
/* Verify that the ISR callback is valid */
ESP_RETURN_ON_FALSE(fn, ESP_ERR_INVALID_ARG, TAG, "ULP RISC-V ISR is NULL");
/* Verify that the interrupt bits are valid */
if (!(mask & (RTC_CNTL_COCPU_INT_ST_M | RTC_CNTL_COCPU_TRAP_INT_ST_M))) {
ESP_LOGE(TAG, "Invalid bitmask for ULP RISC-V interrupts");
return ESP_ERR_INVALID_ARG;
}
/* Make sure we disable only the ULP interrupt bits */
mask &= (RTC_CNTL_COCPU_INT_ST_M | RTC_CNTL_COCPU_TRAP_INT_ST_M);
/* Disable the interrupt bits */
CLEAR_PERI_REG_MASK(RTC_CNTL_INT_ENA_REG, mask);
/* Deregister the RTC ISR */
ESP_RETURN_ON_ERROR(rtc_isr_deregister(fn, arg), TAG, "rtc_isr_deregister() failed");
return ESP_OK;
}
static esp_err_t ulp_riscv_config_wakeup_source(ulp_riscv_wakeup_source_t wakeup_source)
{
esp_err_t ret = ESP_OK;
switch (wakeup_source) {
case ULP_RISCV_WAKEUP_SOURCE_TIMER:
/* start ULP_TIMER */
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_CTRL_REG, RTC_CNTL_ULP_CP_FORCE_START_TOP);
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
break;
case ULP_RISCV_WAKEUP_SOURCE_GPIO:
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_GPIO_WAKEUP_ENA);
break;
default:
ret = ESP_ERR_INVALID_ARG;
}
return ret;
}
esp_err_t ulp_riscv_config_and_run(ulp_riscv_cfg_t* cfg)
{
esp_err_t ret = ESP_OK;
#if CONFIG_IDF_TARGET_ESP32S2
/* Reset COCPU when power on. */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
/* The coprocessor cpu trap signal doesnt have a stable reset value,
force ULP-RISC-V clock on to stop RTC_COCPU_TRAP_TRIG_EN from waking the CPU*/
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_CLK_FO);
/* Disable ULP timer */
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
/* wait for at least 1 RTC_SLOW_CLK cycle */
esp_rom_delay_us(20);
/* Select RISC-V as the ULP_TIMER trigger target. */
CLEAR_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SEL);
/* Select ULP-RISC-V to send the DONE signal. */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_DONE_FORCE);
ret = ulp_riscv_config_wakeup_source(cfg->wakeup_source);
#elif CONFIG_IDF_TARGET_ESP32S3
/* Reset COCPU when power on. */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
/* The coprocessor cpu trap signal doesnt have a stable reset value,
force ULP-RISC-V clock on to stop RTC_COCPU_TRAP_TRIG_EN from waking the CPU*/
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_CLK_FO);
/* Disable ULP timer */
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
/* wait for at least 1 RTC_SLOW_CLK cycle */
esp_rom_delay_us(20);
/* We do not select RISC-V as the Coprocessor here as this could lead to a hang
* in the main CPU. Instead, we reset RTC_CNTL_COCPU_SEL after we have enabled the ULP timer.
*
* IDF-4510
*/
//CLEAR_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SEL);
/* Select ULP-RISC-V to send the DONE signal */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_DONE_FORCE);
/* Set the CLKGATE_EN signal */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_CLKGATE_EN);
ret = ulp_riscv_config_wakeup_source(cfg->wakeup_source);
/* Select RISC-V as the ULP_TIMER trigger target
* Selecting the RISC-V as the Coprocessor at the end is a workaround
* for the hang issue recorded in IDF-4510.
*/
CLEAR_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SEL);
/* Clear any spurious wakeup trigger interrupts upon ULP startup */
esp_rom_delay_us(20);
REG_WRITE(RTC_CNTL_INT_CLR_REG, RTC_CNTL_COCPU_INT_CLR | RTC_CNTL_COCPU_TRAP_INT_CLR | RTC_CNTL_ULP_CP_INT_CLR);
#endif
return ret;
}
esp_err_t ulp_riscv_run(void)
{
ulp_riscv_cfg_t cfg = ULP_RISCV_DEFAULT_CONFIG();
return ulp_riscv_config_and_run(&cfg);
}
void ulp_riscv_timer_stop(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
}
void ulp_riscv_timer_resume(void)
{
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
}
void ulp_riscv_halt(void)
{
ulp_riscv_timer_stop();
/* suspends the ulp operation*/
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_DONE);
/* Resets the processor */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
}
void ulp_riscv_reset()
{
CLEAR_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT | RTC_CNTL_COCPU_DONE);
CLEAR_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
esp_rom_delay_us(20);
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT | RTC_CNTL_COCPU_DONE);
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
}
esp_err_t ulp_riscv_load_binary(const uint8_t* program_binary, size_t program_size_bytes)
{
if (program_binary == NULL) {
return ESP_ERR_INVALID_ARG;
}
if (program_size_bytes > CONFIG_ULP_COPROC_RESERVE_MEM) {
return ESP_ERR_INVALID_SIZE;
}
uint8_t* base = (uint8_t*) RTC_SLOW_MEM;
//Start by clearing memory reserved with zeros, this will also will initialize the bss:
hal_memset(base, 0, CONFIG_ULP_COPROC_RESERVE_MEM);
hal_memcpy(base, program_binary, program_size_bytes);
return ESP_OK;
}