kopia lustrzana https://github.com/espressif/esp-idf
1304 wiersze
54 KiB
C
1304 wiersze
54 KiB
C
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include <esp_types.h>
|
|
#include <stdlib.h>
|
|
#include <ctype.h>
|
|
#include "rom/ets_sys.h"
|
|
#include "esp_log.h"
|
|
#include "soc/rtc_io_reg.h"
|
|
#include "soc/rtc_io_struct.h"
|
|
#include "soc/sens_reg.h"
|
|
#include "soc/sens_struct.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "soc/rtc_cntl_struct.h"
|
|
#include "rtc_io.h"
|
|
#include "touch_pad.h"
|
|
#include "adc.h"
|
|
#include "dac.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/timers.h"
|
|
#include "esp_intr_alloc.h"
|
|
#include "sys/lock.h"
|
|
#include "driver/rtc_cntl.h"
|
|
#include "driver/gpio.h"
|
|
|
|
#ifndef NDEBUG
|
|
// Enable built-in checks in queue.h in debug builds
|
|
#define INVARIANTS
|
|
#endif
|
|
#include "rom/queue.h"
|
|
|
|
|
|
static const char *RTC_MODULE_TAG = "RTC_MODULE";
|
|
|
|
#define RTC_MODULE_CHECK(a, str, ret_val) if (!(a)) { \
|
|
ESP_LOGE(RTC_MODULE_TAG,"%s:%d (%s):%s", __FILE__, __LINE__, __FUNCTION__, str); \
|
|
return (ret_val); \
|
|
}
|
|
|
|
#define RTC_RES_CHECK(res, ret_val) if ( (a) != ESP_OK) { \
|
|
ESP_LOGE(RTC_MODULE_TAG,"%s:%d (%s)", __FILE__, __LINE__, __FUNCTION__); \
|
|
return (ret_val); \
|
|
}
|
|
|
|
#define ADC1_CHECK_FUNCTION_RET(fun_ret) if(fun_ret!=ESP_OK){\
|
|
ESP_LOGE(RTC_MODULE_TAG,"%s:%d\n",__FUNCTION__,__LINE__);\
|
|
return ESP_FAIL;\
|
|
}
|
|
|
|
#define DAC_ERR_STR_CHANNEL_ERROR "DAC channel error"
|
|
|
|
portMUX_TYPE rtc_spinlock = portMUX_INITIALIZER_UNLOCKED;
|
|
static SemaphoreHandle_t rtc_touch_mux = NULL;
|
|
|
|
|
|
typedef struct {
|
|
TimerHandle_t timer;
|
|
uint32_t filtered_val[TOUCH_PAD_MAX];
|
|
uint32_t filter_period;
|
|
uint32_t period;
|
|
bool enable;
|
|
} touch_pad_filter_t;
|
|
static touch_pad_filter_t *s_touch_pad_filter = NULL;
|
|
|
|
//Reg,Mux,Fun,IE,Up,Down,Rtc_number
|
|
const rtc_gpio_desc_t rtc_gpio_desc[GPIO_PIN_COUNT] = {
|
|
{RTC_IO_TOUCH_PAD1_REG, RTC_IO_TOUCH_PAD1_MUX_SEL_M, RTC_IO_TOUCH_PAD1_FUN_SEL_S, RTC_IO_TOUCH_PAD1_FUN_IE_M, RTC_IO_TOUCH_PAD1_RUE_M, RTC_IO_TOUCH_PAD1_RDE_M, RTC_IO_TOUCH_PAD1_SLP_SEL_M, RTC_IO_TOUCH_PAD1_SLP_IE_M, RTC_IO_TOUCH_PAD1_HOLD_M, RTC_CNTL_TOUCH_PAD1_HOLD_FORCE_M, RTC_IO_TOUCH_PAD1_DRV_V, RTC_IO_TOUCH_PAD1_DRV_S, RTCIO_GPIO0_CHANNEL}, //0
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //1
|
|
{RTC_IO_TOUCH_PAD2_REG, RTC_IO_TOUCH_PAD2_MUX_SEL_M, RTC_IO_TOUCH_PAD2_FUN_SEL_S, RTC_IO_TOUCH_PAD2_FUN_IE_M, RTC_IO_TOUCH_PAD2_RUE_M, RTC_IO_TOUCH_PAD2_RDE_M, RTC_IO_TOUCH_PAD2_SLP_SEL_M, RTC_IO_TOUCH_PAD2_SLP_IE_M, RTC_IO_TOUCH_PAD2_HOLD_M, RTC_CNTL_TOUCH_PAD2_HOLD_FORCE_M, RTC_IO_TOUCH_PAD2_DRV_V, RTC_IO_TOUCH_PAD2_DRV_S, RTCIO_GPIO2_CHANNEL}, //2
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //3
|
|
{RTC_IO_TOUCH_PAD0_REG, RTC_IO_TOUCH_PAD0_MUX_SEL_M, RTC_IO_TOUCH_PAD0_FUN_SEL_S, RTC_IO_TOUCH_PAD0_FUN_IE_M, RTC_IO_TOUCH_PAD0_RUE_M, RTC_IO_TOUCH_PAD0_RDE_M, RTC_IO_TOUCH_PAD0_SLP_SEL_M, RTC_IO_TOUCH_PAD0_SLP_IE_M, RTC_IO_TOUCH_PAD0_HOLD_M, RTC_CNTL_TOUCH_PAD0_HOLD_FORCE_M, RTC_IO_TOUCH_PAD0_DRV_V, RTC_IO_TOUCH_PAD0_DRV_S, RTCIO_GPIO4_CHANNEL}, //4
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //5
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //6
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //7
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //8
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //9
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //10
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //11
|
|
{RTC_IO_TOUCH_PAD5_REG, RTC_IO_TOUCH_PAD5_MUX_SEL_M, RTC_IO_TOUCH_PAD5_FUN_SEL_S, RTC_IO_TOUCH_PAD5_FUN_IE_M, RTC_IO_TOUCH_PAD5_RUE_M, RTC_IO_TOUCH_PAD5_RDE_M, RTC_IO_TOUCH_PAD5_SLP_SEL_M, RTC_IO_TOUCH_PAD5_SLP_IE_M, RTC_IO_TOUCH_PAD5_HOLD_M, RTC_CNTL_TOUCH_PAD5_HOLD_FORCE_M, RTC_IO_TOUCH_PAD5_DRV_V, RTC_IO_TOUCH_PAD5_DRV_S, RTCIO_GPIO12_CHANNEL}, //12
|
|
{RTC_IO_TOUCH_PAD4_REG, RTC_IO_TOUCH_PAD4_MUX_SEL_M, RTC_IO_TOUCH_PAD4_FUN_SEL_S, RTC_IO_TOUCH_PAD4_FUN_IE_M, RTC_IO_TOUCH_PAD4_RUE_M, RTC_IO_TOUCH_PAD4_RDE_M, RTC_IO_TOUCH_PAD4_SLP_SEL_M, RTC_IO_TOUCH_PAD4_SLP_IE_M, RTC_IO_TOUCH_PAD4_HOLD_M, RTC_CNTL_TOUCH_PAD4_HOLD_FORCE_M, RTC_IO_TOUCH_PAD4_DRV_V, RTC_IO_TOUCH_PAD4_DRV_S, RTCIO_GPIO13_CHANNEL}, //13
|
|
{RTC_IO_TOUCH_PAD6_REG, RTC_IO_TOUCH_PAD6_MUX_SEL_M, RTC_IO_TOUCH_PAD6_FUN_SEL_S, RTC_IO_TOUCH_PAD6_FUN_IE_M, RTC_IO_TOUCH_PAD6_RUE_M, RTC_IO_TOUCH_PAD6_RDE_M, RTC_IO_TOUCH_PAD6_SLP_SEL_M, RTC_IO_TOUCH_PAD6_SLP_IE_M, RTC_IO_TOUCH_PAD6_HOLD_M, RTC_CNTL_TOUCH_PAD6_HOLD_FORCE_M, RTC_IO_TOUCH_PAD6_DRV_V, RTC_IO_TOUCH_PAD6_DRV_S, RTCIO_GPIO14_CHANNEL}, //14
|
|
{RTC_IO_TOUCH_PAD3_REG, RTC_IO_TOUCH_PAD3_MUX_SEL_M, RTC_IO_TOUCH_PAD3_FUN_SEL_S, RTC_IO_TOUCH_PAD3_FUN_IE_M, RTC_IO_TOUCH_PAD3_RUE_M, RTC_IO_TOUCH_PAD3_RDE_M, RTC_IO_TOUCH_PAD3_SLP_SEL_M, RTC_IO_TOUCH_PAD3_SLP_IE_M, RTC_IO_TOUCH_PAD3_HOLD_M, RTC_CNTL_TOUCH_PAD3_HOLD_FORCE_M, RTC_IO_TOUCH_PAD3_DRV_V, RTC_IO_TOUCH_PAD3_DRV_S, RTCIO_GPIO15_CHANNEL}, //15
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //16
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //17
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //18
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //19
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //20
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //21
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //22
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //23
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //24
|
|
{RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_MUX_SEL_M, RTC_IO_PDAC1_FUN_SEL_S, RTC_IO_PDAC1_FUN_IE_M, RTC_IO_PDAC1_RUE_M, RTC_IO_PDAC1_RDE_M, RTC_IO_PDAC1_SLP_SEL_M, RTC_IO_PDAC1_SLP_IE_M, RTC_IO_PDAC1_HOLD_M, RTC_CNTL_PDAC1_HOLD_FORCE_M, RTC_IO_PDAC1_DRV_V, RTC_IO_PDAC1_DRV_S, RTCIO_GPIO25_CHANNEL}, //25
|
|
{RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_MUX_SEL_M, RTC_IO_PDAC2_FUN_SEL_S, RTC_IO_PDAC2_FUN_IE_M, RTC_IO_PDAC2_RUE_M, RTC_IO_PDAC2_RDE_M, RTC_IO_PDAC2_SLP_SEL_M, RTC_IO_PDAC2_SLP_IE_M, RTC_IO_PDAC2_HOLD_M, RTC_CNTL_PDAC1_HOLD_FORCE_M, RTC_IO_PDAC2_DRV_V, RTC_IO_PDAC2_DRV_S, RTCIO_GPIO26_CHANNEL}, //26
|
|
{RTC_IO_TOUCH_PAD7_REG, RTC_IO_TOUCH_PAD7_MUX_SEL_M, RTC_IO_TOUCH_PAD7_FUN_SEL_S, RTC_IO_TOUCH_PAD7_FUN_IE_M, RTC_IO_TOUCH_PAD7_RUE_M, RTC_IO_TOUCH_PAD7_RDE_M, RTC_IO_TOUCH_PAD7_SLP_SEL_M, RTC_IO_TOUCH_PAD7_SLP_IE_M, RTC_IO_TOUCH_PAD7_HOLD_M, RTC_CNTL_TOUCH_PAD7_HOLD_FORCE_M, RTC_IO_TOUCH_PAD7_DRV_V, RTC_IO_TOUCH_PAD7_DRV_S, RTCIO_GPIO27_CHANNEL}, //27
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //28
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //29
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //30
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //31
|
|
{RTC_IO_XTAL_32K_PAD_REG, RTC_IO_X32P_MUX_SEL_M, RTC_IO_X32P_FUN_SEL_S, RTC_IO_X32P_FUN_IE_M, RTC_IO_X32P_RUE_M, RTC_IO_X32P_RDE_M, RTC_IO_X32P_SLP_SEL_M, RTC_IO_X32P_SLP_IE_M, RTC_IO_X32P_HOLD_M, RTC_CNTL_X32P_HOLD_FORCE_M, RTC_IO_X32P_DRV_V, RTC_IO_X32P_DRV_S, RTCIO_GPIO32_CHANNEL}, //32
|
|
{RTC_IO_XTAL_32K_PAD_REG, RTC_IO_X32N_MUX_SEL_M, RTC_IO_X32N_FUN_SEL_S, RTC_IO_X32N_FUN_IE_M, RTC_IO_X32N_RUE_M, RTC_IO_X32N_RDE_M, RTC_IO_X32N_SLP_SEL_M, RTC_IO_X32N_SLP_IE_M, RTC_IO_X32N_HOLD_M, RTC_CNTL_X32N_HOLD_FORCE_M, RTC_IO_X32N_DRV_V, RTC_IO_X32N_DRV_S, RTCIO_GPIO33_CHANNEL}, //33
|
|
{RTC_IO_ADC_PAD_REG, RTC_IO_ADC1_MUX_SEL_M, RTC_IO_ADC1_FUN_SEL_S, RTC_IO_ADC1_FUN_IE_M, 0, 0, RTC_IO_ADC1_SLP_SEL_M, RTC_IO_ADC1_SLP_IE_M, RTC_IO_ADC1_HOLD_M, RTC_CNTL_ADC1_HOLD_FORCE_M, 0, 0, RTCIO_GPIO34_CHANNEL}, //34
|
|
{RTC_IO_ADC_PAD_REG, RTC_IO_ADC2_MUX_SEL_M, RTC_IO_ADC2_FUN_SEL_S, RTC_IO_ADC2_FUN_IE_M, 0, 0, RTC_IO_ADC2_SLP_SEL_M, RTC_IO_ADC2_SLP_IE_M, RTC_IO_ADC1_HOLD_M, RTC_CNTL_ADC2_HOLD_FORCE_M, 0, 0, RTCIO_GPIO35_CHANNEL}, //35
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE1_MUX_SEL_M, RTC_IO_SENSE1_FUN_SEL_S, RTC_IO_SENSE1_FUN_IE_M, 0, 0, RTC_IO_SENSE1_SLP_SEL_M, RTC_IO_SENSE1_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE1_HOLD_FORCE_M, 0, 0, RTCIO_GPIO36_CHANNEL}, //36
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE2_MUX_SEL_M, RTC_IO_SENSE2_FUN_SEL_S, RTC_IO_SENSE2_FUN_IE_M, 0, 0, RTC_IO_SENSE2_SLP_SEL_M, RTC_IO_SENSE2_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE2_HOLD_FORCE_M, 0, 0, RTCIO_GPIO37_CHANNEL}, //37
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE3_MUX_SEL_M, RTC_IO_SENSE3_FUN_SEL_S, RTC_IO_SENSE3_FUN_IE_M, 0, 0, RTC_IO_SENSE3_SLP_SEL_M, RTC_IO_SENSE3_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE3_HOLD_FORCE_M, 0, 0, RTCIO_GPIO38_CHANNEL}, //38
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE4_MUX_SEL_M, RTC_IO_SENSE4_FUN_SEL_S, RTC_IO_SENSE4_FUN_IE_M, 0, 0, RTC_IO_SENSE4_SLP_SEL_M, RTC_IO_SENSE4_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE4_HOLD_FORCE_M, 0, 0, RTCIO_GPIO39_CHANNEL}, //39
|
|
};
|
|
|
|
/*---------------------------------------------------------------
|
|
RTC IO
|
|
---------------------------------------------------------------*/
|
|
esp_err_t rtc_gpio_init(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
// 0: GPIO connected to digital GPIO module. 1: GPIO connected to analog RTC module.
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, (rtc_gpio_desc[gpio_num].mux));
|
|
//0:RTC FUNCIOTN 1,2,3:Reserved
|
|
SET_PERI_REG_BITS(rtc_gpio_desc[gpio_num].reg, RTC_IO_TOUCH_PAD1_FUN_SEL_V, 0x0, rtc_gpio_desc[gpio_num].func);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_deinit(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Select Gpio as Digital Gpio
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, (rtc_gpio_desc[gpio_num].mux));
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_output_enable(gpio_num_t gpio_num)
|
|
{
|
|
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
|
|
RTC_MODULE_CHECK(rtc_gpio_num != -1, "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TS_S)));
|
|
CLEAR_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TC_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TC_S)));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_output_disable(gpio_num_t gpio_num)
|
|
{
|
|
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
|
|
RTC_MODULE_CHECK(rtc_gpio_num != -1, "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
CLEAR_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TS_S)));
|
|
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TC_REG, (1 << ( rtc_gpio_num + RTC_GPIO_ENABLE_W1TC_S)));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_input_enable(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].ie);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_input_disable(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].ie);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_set_level(gpio_num_t gpio_num, uint32_t level)
|
|
{
|
|
int rtc_gpio_num = rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;;
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
|
|
if (level) {
|
|
WRITE_PERI_REG(RTC_GPIO_OUT_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_OUT_DATA_W1TS_S)));
|
|
} else {
|
|
WRITE_PERI_REG(RTC_GPIO_OUT_W1TC_REG, (1 << (rtc_gpio_num + RTC_GPIO_OUT_DATA_W1TC_S)));
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
uint32_t rtc_gpio_get_level(gpio_num_t gpio_num)
|
|
{
|
|
uint32_t level = 0;
|
|
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
level = READ_PERI_REG(RTC_GPIO_IN_REG);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ((level >> (RTC_GPIO_IN_NEXT_S + rtc_gpio_num)) & 0x01);
|
|
}
|
|
|
|
esp_err_t rtc_gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t strength)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "Output pad only", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(strength < GPIO_DRIVE_CAP_MAX, "GPIO drive capability error", ESP_ERR_INVALID_ARG);
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_BITS(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].drv_v, strength, rtc_gpio_desc[gpio_num].drv_s);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "Output pad only", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(strength != NULL, "GPIO drive pointer error", ESP_ERR_INVALID_ARG);
|
|
|
|
*strength = GET_PERI_REG_BITS2(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].drv_v, rtc_gpio_desc[gpio_num].drv_s);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_set_direction(gpio_num_t gpio_num, rtc_gpio_mode_t mode)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
|
|
switch (mode) {
|
|
case RTC_GPIO_MODE_INPUT_ONLY:
|
|
rtc_gpio_output_disable(gpio_num);
|
|
rtc_gpio_input_enable(gpio_num);
|
|
break;
|
|
case RTC_GPIO_MODE_OUTPUT_ONLY:
|
|
rtc_gpio_output_enable(gpio_num);
|
|
rtc_gpio_input_disable(gpio_num);
|
|
break;
|
|
case RTC_GPIO_MODE_INPUT_OUTUT:
|
|
rtc_gpio_output_enable(gpio_num);
|
|
rtc_gpio_input_enable(gpio_num);
|
|
break;
|
|
case RTC_GPIO_MODE_DISABLED:
|
|
rtc_gpio_output_disable(gpio_num);
|
|
rtc_gpio_input_disable(gpio_num);
|
|
break;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pullup_en(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if (rtc_gpio_desc[gpio_num].pullup == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pullup);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pulldown_en(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if (rtc_gpio_desc[gpio_num].pulldown == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pulldown);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pullup_dis(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if ( rtc_gpio_desc[gpio_num].pullup == 0 ) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pullup);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pulldown_dis(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if (rtc_gpio_desc[gpio_num].pulldown == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pulldown);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_hold_en(gpio_num_t gpio_num)
|
|
{
|
|
// check if an RTC IO
|
|
if (rtc_gpio_desc[gpio_num].pullup == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].hold);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_hold_dis(gpio_num_t gpio_num)
|
|
{
|
|
// check if an RTC IO
|
|
if (rtc_gpio_desc[gpio_num].pullup == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].hold);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
void rtc_gpio_force_hold_dis_all()
|
|
{
|
|
for (int gpio = 0; gpio < GPIO_PIN_COUNT; ++gpio) {
|
|
const rtc_gpio_desc_t* desc = &rtc_gpio_desc[gpio];
|
|
if (desc->hold_force != 0) {
|
|
REG_CLR_BIT(RTC_CNTL_HOLD_FORCE_REG, desc->hold_force);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------------
|
|
Touch Pad
|
|
---------------------------------------------------------------*/
|
|
esp_err_t touch_pad_isr_handler_register(void (*fn)(void *), void *arg, int no_use, intr_handle_t *handle_no_use)
|
|
{
|
|
RTC_MODULE_CHECK(fn, "Touch_Pad ISR null", ESP_ERR_INVALID_ARG);
|
|
return rtc_isr_register(fn, arg, RTC_CNTL_TOUCH_INT_ST_M);
|
|
}
|
|
|
|
esp_err_t touch_pad_isr_register(intr_handler_t fn, void* arg)
|
|
{
|
|
RTC_MODULE_CHECK(fn, "Touch_Pad ISR null", ESP_ERR_INVALID_ARG);
|
|
return rtc_isr_register(fn, arg, RTC_CNTL_TOUCH_INT_ST_M);
|
|
}
|
|
|
|
esp_err_t touch_pad_isr_deregister(intr_handler_t fn, void *arg)
|
|
{
|
|
return rtc_isr_deregister(fn, arg);
|
|
}
|
|
|
|
static esp_err_t touch_pad_get_io_num(touch_pad_t touch_num, gpio_num_t *gpio_num)
|
|
{
|
|
switch (touch_num) {
|
|
case TOUCH_PAD_NUM0:
|
|
*gpio_num = TOUCH_PAD_NUM0_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM1:
|
|
*gpio_num = TOUCH_PAD_NUM1_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM2:
|
|
*gpio_num = TOUCH_PAD_NUM2_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM3:
|
|
*gpio_num = TOUCH_PAD_NUM3_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM4:
|
|
*gpio_num = TOUCH_PAD_NUM4_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM5:
|
|
*gpio_num = TOUCH_PAD_NUM5_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM6:
|
|
*gpio_num = TOUCH_PAD_NUM6_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM7:
|
|
*gpio_num = TOUCH_PAD_NUM7_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM8:
|
|
*gpio_num = TOUCH_PAD_NUM8_GPIO_NUM;
|
|
break;
|
|
case TOUCH_PAD_NUM9:
|
|
*gpio_num = TOUCH_PAD_NUM9_GPIO_NUM;
|
|
break;
|
|
default:
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
#define TOUCH_PAD_FILTER_FACTOR_DEFAULT (16)
|
|
#define TOUCH_PAD_SHIFT_DEFAULT (4)
|
|
static uint32_t _touch_filter_iir(uint32_t in_now, uint32_t out_last, uint32_t k)
|
|
{
|
|
if (k == 0) {
|
|
return in_now;
|
|
} else {
|
|
uint32_t out_now = (in_now + (k - 1) * out_last) / k;
|
|
return out_now;
|
|
}
|
|
}
|
|
|
|
static void touch_pad_filter_cb(void *arg)
|
|
{
|
|
if (s_touch_pad_filter == NULL) {
|
|
return;
|
|
}
|
|
uint16_t val;
|
|
for (int i = 0; i < TOUCH_PAD_MAX; i++) {
|
|
touch_pad_read(i, &val);
|
|
s_touch_pad_filter->filtered_val[i] = s_touch_pad_filter->filtered_val[i] == 0 ? (val << TOUCH_PAD_SHIFT_DEFAULT) : s_touch_pad_filter->filtered_val[i];
|
|
s_touch_pad_filter->filtered_val[i] = _touch_filter_iir((val << TOUCH_PAD_SHIFT_DEFAULT),
|
|
s_touch_pad_filter->filtered_val[i], TOUCH_PAD_FILTER_FACTOR_DEFAULT);
|
|
}
|
|
}
|
|
|
|
esp_err_t touch_pad_set_meas_time(uint16_t sleep_cycle, uint16_t meas_cycle)
|
|
{
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//touch sensor sleep cycle Time = sleep_cycle / RTC_SLOW_CLK( can be 150k or 32k depending on the options)
|
|
SENS.sar_touch_ctrl2.touch_sleep_cycles = sleep_cycle;
|
|
//touch sensor measure time= meas_cycle / 8Mhz
|
|
SENS.sar_touch_ctrl1.touch_meas_delay = meas_cycle;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_meas_time(uint16_t *sleep_cycle, uint16_t *meas_cycle)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (sleep_cycle) {
|
|
*sleep_cycle = SENS.sar_touch_ctrl2.touch_sleep_cycles;
|
|
}
|
|
if (meas_cycle) {
|
|
*meas_cycle = SENS.sar_touch_ctrl1.touch_meas_delay;
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_voltage(touch_high_volt_t refh, touch_low_volt_t refl, touch_volt_atten_t atten)
|
|
{
|
|
RTC_MODULE_CHECK(((refh < TOUCH_HVOLT_MAX) && (refh >= (int )TOUCH_HVOLT_KEEP)), "touch refh error",
|
|
ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(((refl < TOUCH_LVOLT_MAX) && (refh >= (int )TOUCH_LVOLT_KEEP)), "touch refl error",
|
|
ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(((atten < TOUCH_HVOLT_ATTEN_MAX) && (refh >= (int )TOUCH_HVOLT_ATTEN_KEEP)), "touch atten error",
|
|
ESP_ERR_INVALID_ARG);
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (refh > TOUCH_HVOLT_KEEP) {
|
|
RTCIO.touch_cfg.drefh = refh;
|
|
}
|
|
if (refl > TOUCH_LVOLT_KEEP) {
|
|
RTCIO.touch_cfg.drefl = refl;
|
|
}
|
|
if (atten > TOUCH_HVOLT_ATTEN_KEEP) {
|
|
RTCIO.touch_cfg.drange = atten;
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_voltage(touch_high_volt_t *refh, touch_low_volt_t *refl, touch_volt_atten_t *atten)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (refh) {
|
|
*refh = RTCIO.touch_cfg.drefh;
|
|
}
|
|
if (refl) {
|
|
*refl = RTCIO.touch_cfg.drefl;
|
|
}
|
|
if (atten) {
|
|
*atten = RTCIO.touch_cfg.drange;
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_cnt_mode(touch_pad_t touch_num, touch_cnt_slope_t slope, touch_tie_opt_t opt)
|
|
{
|
|
RTC_MODULE_CHECK((slope < TOUCH_PAD_SLOPE_MAX), "touch slope error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK((opt < TOUCH_PAD_TIE_OPT_MAX), "touch opt error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//set tie opt value, high or low level seem no difference for counter
|
|
RTCIO.touch_pad[touch_num].tie_opt = opt;
|
|
//touch sensor set slope for charging and discharging.
|
|
RTCIO.touch_pad[touch_num].dac = slope;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_cnt_mode(touch_pad_t touch_num, touch_cnt_slope_t *slope, touch_tie_opt_t *opt)
|
|
{
|
|
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (slope) {
|
|
*slope = RTCIO.touch_pad[touch_num].dac;
|
|
}
|
|
if (opt) {
|
|
*opt = RTCIO.touch_pad[touch_num].tie_opt;
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_io_init(touch_pad_t touch_num)
|
|
{
|
|
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
|
|
gpio_num_t gpio_num = GPIO_NUM_0;
|
|
touch_pad_get_io_num(touch_num, &gpio_num);
|
|
rtc_gpio_init(gpio_num);
|
|
rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED);
|
|
rtc_gpio_pulldown_dis(gpio_num);
|
|
rtc_gpio_pullup_dis(gpio_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_fsm_mode(touch_fsm_mode_t mode)
|
|
{
|
|
RTC_MODULE_CHECK((mode < TOUCH_FSM_MODE_MAX), "touch fsm mode error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_ctrl2.touch_start_en = 0;
|
|
SENS.sar_touch_ctrl2.touch_start_force = mode;
|
|
RTCCNTL.state0.touch_slp_timer_en = (mode == TOUCH_FSM_MODE_TIMER ? 1 : 0);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_fsm_mode(touch_fsm_mode_t *mode)
|
|
{
|
|
if (mode) {
|
|
*mode = SENS.sar_touch_ctrl2.touch_start_force;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_sw_start()
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_ctrl2.touch_start_en = 0;
|
|
SENS.sar_touch_ctrl2.touch_start_en = 1;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_thresh(touch_pad_t touch_num, uint16_t threshold)
|
|
{
|
|
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (touch_num & 0x1) {
|
|
SENS.touch_thresh[touch_num / 2].l_thresh = threshold;
|
|
} else {
|
|
SENS.touch_thresh[touch_num / 2].h_thresh = threshold;
|
|
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_thresh(touch_pad_t touch_num, uint16_t *threshold)
|
|
{
|
|
RTC_MODULE_CHECK((touch_num < TOUCH_PAD_MAX), "touch IO error", ESP_ERR_INVALID_ARG);
|
|
if (threshold) {
|
|
*threshold = (touch_num & 0x1 )? \
|
|
SENS.touch_thresh[touch_num / 2].l_thresh : \
|
|
SENS.touch_thresh[touch_num / 2].h_thresh;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_trigger_mode(touch_trigger_mode_t mode)
|
|
{
|
|
RTC_MODULE_CHECK((mode < TOUCH_TRIGGER_MAX), "touch trigger mode error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_ctrl1.touch_out_sel = mode;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_trigger_mode(touch_trigger_mode_t *mode)
|
|
{
|
|
if (mode) {
|
|
*mode = SENS.sar_touch_ctrl1.touch_out_sel;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_trigger_source(touch_trigger_src_t src)
|
|
{
|
|
RTC_MODULE_CHECK((src < TOUCH_TRIGGER_SOURCE_MAX), "touch trigger source error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_ctrl1.touch_out_1en = src;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_trigger_source(touch_trigger_src_t *src)
|
|
{
|
|
if (src) {
|
|
*src = SENS.sar_touch_ctrl1.touch_out_1en;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_group_mask(uint16_t set1_mask, uint16_t set2_mask, uint16_t en_mask)
|
|
{
|
|
RTC_MODULE_CHECK((set1_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set1 bitmask error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK((set2_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set2 bitmask error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK((en_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch work_en bitmask error", ESP_ERR_INVALID_ARG);
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_enable.touch_pad_outen1 |= set1_mask;
|
|
SENS.sar_touch_enable.touch_pad_outen2 |= set2_mask;
|
|
SENS.sar_touch_enable.touch_pad_worken |= en_mask;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_group_mask(uint16_t *set1_mask, uint16_t *set2_mask, uint16_t *en_mask)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (set1_mask) {
|
|
*set1_mask = SENS.sar_touch_enable.touch_pad_outen1;
|
|
}
|
|
if (set2_mask) {
|
|
*set2_mask = SENS.sar_touch_enable.touch_pad_outen2;
|
|
}
|
|
if (en_mask) {
|
|
*en_mask = SENS.sar_touch_enable.touch_pad_worken;
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_clear_group_mask(uint16_t set1_mask, uint16_t set2_mask, uint16_t en_mask)
|
|
{
|
|
RTC_MODULE_CHECK((set1_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set1 bitmask error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK((set2_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch set2 bitmask error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK((en_mask <= TOUCH_PAD_BIT_MASK_MAX), "touch work_en bitmask error", ESP_ERR_INVALID_ARG);
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_enable.touch_pad_outen1 &= (~set1_mask);
|
|
SENS.sar_touch_enable.touch_pad_outen2 &= (~set2_mask);
|
|
SENS.sar_touch_enable.touch_pad_worken &= (~en_mask);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
uint32_t IRAM_ATTR touch_pad_get_status()
|
|
{
|
|
return SENS.sar_touch_ctrl2.touch_meas_en;
|
|
}
|
|
|
|
esp_err_t IRAM_ATTR touch_pad_clear_status()
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SENS.sar_touch_ctrl2.touch_meas_en_clr = 1;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_intr_enable()
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
RTCCNTL.int_ena.rtc_touch = 1;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_intr_disable()
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
RTCCNTL.int_ena.rtc_touch = 0;
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_config(touch_pad_t touch_num, uint16_t threshold)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
|
|
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
|
|
touch_pad_set_thresh(touch_num, threshold);
|
|
touch_pad_io_init(touch_num);
|
|
touch_pad_set_cnt_mode(touch_num, TOUCH_PAD_SLOPE_7, TOUCH_PAD_TIE_OPT_HIGH);
|
|
touch_pad_set_group_mask((1 << touch_num), (1 << touch_num), (1 << touch_num));
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_init()
|
|
{
|
|
if (rtc_touch_mux == NULL) {
|
|
rtc_touch_mux = xSemaphoreCreateMutex();
|
|
}
|
|
if (rtc_touch_mux == NULL) {
|
|
return ESP_FAIL;
|
|
}
|
|
touch_pad_intr_disable();
|
|
touch_pad_set_fsm_mode(TOUCH_FSM_MODE_DEFAULT);
|
|
touch_pad_set_trigger_mode(TOUCH_TRIGGER_MODE_DEFAULT);
|
|
touch_pad_set_trigger_source(TOUCH_TRIGGER_SOURCE_DEFAULT);
|
|
touch_pad_clear_status();
|
|
touch_pad_set_meas_time(TOUCH_PAD_SLEEP_CYCLE_DEFAULT, TOUCH_PAD_MEASURE_CYCLE_DEFAULT);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_deinit()
|
|
{
|
|
if (rtc_touch_mux == NULL) {
|
|
return ESP_FAIL;
|
|
}
|
|
touch_pad_filter_delete();
|
|
touch_pad_set_fsm_mode(TOUCH_FSM_MODE_SW);
|
|
touch_pad_clear_status();
|
|
touch_pad_intr_disable();
|
|
vSemaphoreDelete(rtc_touch_mux);
|
|
rtc_touch_mux = NULL;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_read(touch_pad_t touch_num, uint16_t *touch_value)
|
|
{
|
|
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(touch_value != NULL, "touch_value", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
while (SENS.sar_touch_ctrl2.touch_meas_done == 0) {};
|
|
*touch_value = (touch_num & 0x1) ? \
|
|
SENS.touch_meas[touch_num / 2].l_val: \
|
|
SENS.touch_meas[touch_num / 2].h_val;
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
IRAM_ATTR esp_err_t touch_pad_read_filtered(touch_pad_t touch_num, uint16_t *touch_value)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_FAIL);
|
|
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(touch_value != NULL, "touch_value", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
|
|
|
|
*touch_value = (s_touch_pad_filter->filtered_val[touch_num] >> TOUCH_PAD_SHIFT_DEFAULT);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_set_filter_period(uint32_t new_period_ms)
|
|
{
|
|
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
|
|
RTC_MODULE_CHECK(new_period_ms > 0, "Touch pad filter period error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
if (s_touch_pad_filter != NULL) {
|
|
xTimerChangePeriod(s_touch_pad_filter->timer, new_period_ms / portTICK_PERIOD_MS, portMAX_DELAY);
|
|
s_touch_pad_filter->period = new_period_ms;
|
|
} else {
|
|
ESP_LOGE(RTC_MODULE_TAG, "Touch pad filter deleted");
|
|
ret = ESP_ERR_INVALID_STATE;
|
|
}
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t touch_pad_get_filter_period(uint32_t* p_period_ms)
|
|
{
|
|
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
|
|
RTC_MODULE_CHECK(p_period_ms != NULL, "Touch pad period pointer error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
if (s_touch_pad_filter != NULL) {
|
|
*p_period_ms = s_touch_pad_filter->period;
|
|
} else {
|
|
ESP_LOGE(RTC_MODULE_TAG, "Touch pad filter deleted");
|
|
ret = ESP_ERR_INVALID_STATE;
|
|
}
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t touch_pad_filter_start(uint32_t filter_period_ms)
|
|
{
|
|
RTC_MODULE_CHECK(filter_period_ms >= portTICK_PERIOD_MS, "Touch pad filter period error", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(rtc_touch_mux != NULL, "Touch pad not initialized", ESP_ERR_INVALID_STATE);
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
if (s_touch_pad_filter == NULL) {
|
|
s_touch_pad_filter = (touch_pad_filter_t *) calloc(1, sizeof(touch_pad_filter_t));
|
|
if (s_touch_pad_filter == NULL) {
|
|
ret = ESP_ERR_NO_MEM;
|
|
}
|
|
}
|
|
if (s_touch_pad_filter->timer == NULL) {
|
|
s_touch_pad_filter->timer = xTimerCreate("filter_tmr", filter_period_ms / portTICK_PERIOD_MS, pdTRUE,
|
|
NULL, touch_pad_filter_cb);
|
|
if (s_touch_pad_filter->timer == NULL) {
|
|
ret = ESP_ERR_NO_MEM;
|
|
}
|
|
xTimerStart(s_touch_pad_filter->timer, portMAX_DELAY);
|
|
s_touch_pad_filter->enable = true;
|
|
} else {
|
|
xTimerChangePeriod(s_touch_pad_filter->timer, filter_period_ms / portTICK_PERIOD_MS, portMAX_DELAY);
|
|
s_touch_pad_filter->period = filter_period_ms;
|
|
xTimerStart(s_touch_pad_filter->timer, portMAX_DELAY);
|
|
}
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t touch_pad_filter_stop()
|
|
{
|
|
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
if (s_touch_pad_filter != NULL) {
|
|
xTimerStop(s_touch_pad_filter->timer, portMAX_DELAY);
|
|
s_touch_pad_filter->enable = false;
|
|
} else {
|
|
ESP_LOGE(RTC_MODULE_TAG, "Touch pad filter deleted");
|
|
ret = ESP_ERR_INVALID_STATE;
|
|
}
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t touch_pad_filter_delete()
|
|
{
|
|
RTC_MODULE_CHECK(s_touch_pad_filter != NULL, "Touch pad filter not initialized", ESP_ERR_INVALID_STATE);
|
|
xSemaphoreTake(rtc_touch_mux, portMAX_DELAY);
|
|
if (s_touch_pad_filter != NULL) {
|
|
if (s_touch_pad_filter->timer != NULL) {
|
|
xTimerStop(s_touch_pad_filter->timer, portMAX_DELAY);
|
|
xTimerDelete(s_touch_pad_filter->timer, portMAX_DELAY);
|
|
s_touch_pad_filter->timer = NULL;
|
|
}
|
|
free(s_touch_pad_filter);
|
|
s_touch_pad_filter = NULL;
|
|
}
|
|
xSemaphoreGive(rtc_touch_mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
ADC
|
|
---------------------------------------------------------------*/
|
|
static esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
|
|
|
|
switch (channel) {
|
|
case ADC1_CHANNEL_0:
|
|
*gpio_num = ADC1_CHANNEL_0_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_1:
|
|
*gpio_num = ADC1_CHANNEL_1_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_2:
|
|
*gpio_num = ADC1_CHANNEL_2_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_3:
|
|
*gpio_num = ADC1_CHANNEL_3_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_4:
|
|
*gpio_num = ADC1_CHANNEL_4_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_5:
|
|
*gpio_num = ADC1_CHANNEL_5_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_6:
|
|
*gpio_num = ADC1_CHANNEL_6_GPIO_NUM;
|
|
break;
|
|
case ADC1_CHANNEL_7:
|
|
*gpio_num = ADC1_CHANNEL_7_GPIO_NUM;
|
|
break;
|
|
default:
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t adc1_pad_init(adc1_channel_t channel)
|
|
{
|
|
gpio_num_t gpio_num = 0;
|
|
ADC1_CHECK_FUNCTION_RET(adc1_pad_get_io_num(channel, &gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(rtc_gpio_init(gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(rtc_gpio_output_disable(gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(rtc_gpio_input_disable(gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(gpio_set_pull_mode(gpio_num, GPIO_FLOATING));
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t adc1_config_channel_atten(adc1_channel_t channel, adc_atten_t atten)
|
|
{
|
|
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(atten <= ADC_ATTEN_11db, "ADC Atten Err", ESP_ERR_INVALID_ARG);
|
|
adc1_pad_init(channel);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_BITS(SENS_SAR_ATTEN1_REG, 3, atten, (channel * 2)); //SAR1_atten
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t adc1_config_width(adc_bits_width_t width_bit)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_BITS(SENS_SAR_START_FORCE_REG, SENS_SAR1_BIT_WIDTH_V, width_bit, SENS_SAR1_BIT_WIDTH_S); //SAR2_BIT_WIDTH[1:0]=0x3, SAR1_BIT_WIDTH[1:0]=0x3
|
|
//Invert the adc value,the Output value is invert
|
|
SET_PERI_REG_MASK(SENS_SAR_READ_CTRL_REG, SENS_SAR1_DATA_INV);
|
|
//Set The adc sample width,invert adc value,must
|
|
SET_PERI_REG_BITS(SENS_SAR_READ_CTRL_REG, SENS_SAR1_SAMPLE_BIT_V, width_bit, SENS_SAR1_SAMPLE_BIT_S); //digital sar1_bit_width[1:0]=3
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
int adc1_get_raw(adc1_channel_t channel)
|
|
{
|
|
uint16_t adc_value;
|
|
|
|
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Adc Controler is Rtc module,not ulp coprocessor
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 1, SENS_MEAS1_START_FORCE_S); //force pad mux and force start
|
|
//Bit1=0:Fsm Bit1=1(Bit0=0:PownDown Bit10=1:Powerup)
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 0, SENS_FORCE_XPD_SAR_S); //force XPD_SAR=0, use XPD_FSM
|
|
//Disable Amp Bit1=0:Fsm Bit1=1(Bit0=0:PownDown Bit10=1:Powerup)
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_AMP, 0x2, SENS_FORCE_XPD_AMP_S); //force XPD_AMP=0
|
|
//Open the ADC1 Data port Not ulp coprocessor
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 1, SENS_SAR1_EN_PAD_FORCE_S); //open the ADC1 data port
|
|
//Select channel
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, SENS_SAR1_EN_PAD, (1 << channel), SENS_SAR1_EN_PAD_S); //pad enable
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_CTRL_REG, 0xfff, 0x0, SENS_AMP_RST_FB_FSM_S); //[11:8]:short ref ground, [7:4]:short ref, [3:0]:rst fb
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT1_REG, SENS_SAR_AMP_WAIT1, 0x1, SENS_SAR_AMP_WAIT1_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT1_REG, SENS_SAR_AMP_WAIT2, 0x1, SENS_SAR_AMP_WAIT2_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_SAR_AMP_WAIT3, 0x1, SENS_SAR_AMP_WAIT3_S);
|
|
while (GET_PERI_REG_BITS2(SENS_SAR_SLAVE_ADDR1_REG, 0x7, SENS_MEAS_STATUS_S) != 0); //wait det_fsm==0
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 0, SENS_MEAS1_START_SAR_S); //start force 0
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 1, SENS_MEAS1_START_SAR_S); //start force 1
|
|
while (GET_PERI_REG_MASK(SENS_SAR_MEAS_START1_REG, SENS_MEAS1_DONE_SAR) == 0) {}; //read done
|
|
adc_value = GET_PERI_REG_BITS2(SENS_SAR_MEAS_START1_REG, SENS_MEAS1_DATA_SAR, SENS_MEAS1_DATA_SAR_S);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return adc_value;
|
|
}
|
|
|
|
int adc1_get_voltage(adc1_channel_t channel) //Deprecated. Use adc1_get_raw() instead
|
|
{
|
|
return adc1_get_raw(channel);
|
|
}
|
|
|
|
void adc1_ulp_enable(void)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_MEAS_START1_REG, SENS_MEAS1_START_FORCE);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_MEAS_START1_REG, SENS_SAR1_EN_PAD_FORCE_M);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_AMP, 0x2, SENS_FORCE_XPD_AMP_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 0, SENS_FORCE_XPD_SAR_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_CTRL_REG, 0xfff, 0x0, SENS_AMP_RST_FB_FSM_S); //[11:8]:short ref ground, [7:4]:short ref, [3:0]:rst fb
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT1_REG, SENS_SAR_AMP_WAIT1, 0x1, SENS_SAR_AMP_WAIT1_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT1_REG, SENS_SAR_AMP_WAIT2, 0x1, SENS_SAR_AMP_WAIT2_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_SAR_AMP_WAIT3, 0x1, SENS_SAR_AMP_WAIT3_S);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
}
|
|
|
|
esp_err_t adc2_vref_to_gpio(gpio_num_t gpio)
|
|
{
|
|
int channel;
|
|
if(gpio == GPIO_NUM_25){
|
|
channel = 8; //Channel 8 bit
|
|
}else if (gpio == GPIO_NUM_26){
|
|
channel = 9; //Channel 9 bit
|
|
}else if (gpio == GPIO_NUM_27){
|
|
channel = 7; //Channel 7 bit
|
|
}else{
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//Configure RTC gpio
|
|
rtc_gpio_init(gpio);
|
|
rtc_gpio_output_disable(gpio);
|
|
rtc_gpio_input_disable(gpio);
|
|
rtc_gpio_pullup_dis(gpio);
|
|
rtc_gpio_pulldown_dis(gpio);
|
|
|
|
SET_PERI_REG_BITS(RTC_CNTL_BIAS_CONF_REG, RTC_CNTL_DBG_ATTEN, 0, RTC_CNTL_DBG_ATTEN_S); //Check DBG effect outside sleep mode
|
|
//set dtest (MUX_SEL : 0 -> RTC; 1-> vdd_sar2)
|
|
SET_PERI_REG_BITS(RTC_CNTL_TEST_MUX_REG, RTC_CNTL_DTEST_RTC, 1, RTC_CNTL_DTEST_RTC_S); //Config test mux to route v_ref to ADC2 Channels
|
|
//set ent
|
|
SET_PERI_REG_MASK(RTC_CNTL_TEST_MUX_REG, RTC_CNTL_ENT_RTC_M);
|
|
//set sar2_en_test
|
|
SET_PERI_REG_MASK(SENS_SAR_START_FORCE_REG, SENS_SAR2_EN_TEST_M);
|
|
//force fsm
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 3, SENS_FORCE_XPD_SAR_S); //Select power source of ADC
|
|
//set sar2 en force
|
|
SET_PERI_REG_MASK(SENS_SAR_MEAS_START2_REG, SENS_SAR2_EN_PAD_FORCE_M); //Pad bitmap controlled by SW
|
|
//set en_pad for channels 7,8,9 (bits 0x380)
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START2_REG, SENS_SAR2_EN_PAD, 1<<channel, SENS_SAR2_EN_PAD_S);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
DAC
|
|
---------------------------------------------------------------*/
|
|
static esp_err_t dac_pad_get_io_num(dac_channel_t channel, gpio_num_t *gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(gpio_num, "Param null", ESP_ERR_INVALID_ARG);
|
|
|
|
switch (channel) {
|
|
case DAC_CHANNEL_1:
|
|
*gpio_num = DAC_CHANNEL_1_GPIO_NUM;
|
|
break;
|
|
case DAC_CHANNEL_2:
|
|
*gpio_num = DAC_CHANNEL_2_GPIO_NUM;
|
|
break;
|
|
default:
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t dac_rtc_pad_init(dac_channel_t channel)
|
|
{
|
|
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
|
|
gpio_num_t gpio_num = 0;
|
|
dac_pad_get_io_num(channel, &gpio_num);
|
|
rtc_gpio_init(gpio_num);
|
|
rtc_gpio_output_disable(gpio_num);
|
|
rtc_gpio_input_disable(gpio_num);
|
|
rtc_gpio_pullup_dis(gpio_num);
|
|
rtc_gpio_pulldown_dis(gpio_num);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_output_enable(dac_channel_t channel)
|
|
{
|
|
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
|
|
dac_rtc_pad_init(channel);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (channel == DAC_CHANNEL_1) {
|
|
SET_PERI_REG_MASK(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_XPD_DAC | RTC_IO_PDAC1_DAC_XPD_FORCE);
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
SET_PERI_REG_MASK(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_XPD_DAC | RTC_IO_PDAC2_DAC_XPD_FORCE);
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_output_disable(dac_channel_t channel)
|
|
{
|
|
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
if (channel == DAC_CHANNEL_1) {
|
|
CLEAR_PERI_REG_MASK(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_XPD_DAC | RTC_IO_PDAC1_DAC_XPD_FORCE);
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
CLEAR_PERI_REG_MASK(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_XPD_DAC | RTC_IO_PDAC2_DAC_XPD_FORCE);
|
|
}
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_output_voltage(dac_channel_t channel, uint8_t dac_value)
|
|
{
|
|
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Disable Tone
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_SW_TONE_EN);
|
|
|
|
//Disable Channel Tone
|
|
if (channel == DAC_CHANNEL_1) {
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN1_M);
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN2_M);
|
|
}
|
|
|
|
//Set the Dac value
|
|
if (channel == DAC_CHANNEL_1) {
|
|
SET_PERI_REG_BITS(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_DAC, dac_value, RTC_IO_PDAC1_DAC_S); //dac_output
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
SET_PERI_REG_BITS(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_DAC, dac_value, RTC_IO_PDAC2_DAC_S); //dac_output
|
|
}
|
|
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_out_voltage(dac_channel_t channel, uint8_t dac_value)
|
|
{
|
|
RTC_MODULE_CHECK((channel >= DAC_CHANNEL_1) && (channel < DAC_CHANNEL_MAX), DAC_ERR_STR_CHANNEL_ERROR, ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Disable Tone
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_SW_TONE_EN);
|
|
|
|
//Disable Channel Tone
|
|
if (channel == DAC_CHANNEL_1) {
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN1_M);
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN2_M);
|
|
}
|
|
|
|
//Set the Dac value
|
|
if (channel == DAC_CHANNEL_1) {
|
|
SET_PERI_REG_BITS(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_DAC, dac_value, RTC_IO_PDAC1_DAC_S); //dac_output
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
SET_PERI_REG_BITS(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_DAC, dac_value, RTC_IO_PDAC2_DAC_S); //dac_output
|
|
}
|
|
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
//dac pad init
|
|
dac_rtc_pad_init(channel);
|
|
dac_output_enable(channel);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_i2s_enable()
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_DAC_DIG_FORCE_M | SENS_DAC_CLK_INV_M);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_i2s_disable()
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_DAC_DIG_FORCE_M | SENS_DAC_CLK_INV_M);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
HALL SENSOR
|
|
---------------------------------------------------------------*/
|
|
static int hall_sensor_get_value() //hall sensor without LNA
|
|
{
|
|
int Sens_Vp0;
|
|
int Sens_Vn0;
|
|
int Sens_Vp1;
|
|
int Sens_Vn1;
|
|
int hall_value;
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_XPD_HALL_FORCE_M); // hall sens force enable
|
|
SET_PERI_REG_MASK(RTC_IO_HALL_SENS_REG, RTC_IO_XPD_HALL); // xpd hall
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_HALL_PHASE_FORCE_M); // phase force
|
|
CLEAR_PERI_REG_MASK(RTC_IO_HALL_SENS_REG, RTC_IO_HALL_PHASE); // hall phase
|
|
Sens_Vp0 = adc1_get_raw(ADC1_CHANNEL_0);
|
|
Sens_Vn0 = adc1_get_raw(ADC1_CHANNEL_3);
|
|
SET_PERI_REG_MASK(RTC_IO_HALL_SENS_REG, RTC_IO_HALL_PHASE);
|
|
Sens_Vp1 = adc1_get_raw(ADC1_CHANNEL_0);
|
|
Sens_Vn1 = adc1_get_raw(ADC1_CHANNEL_3);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 0, SENS_FORCE_XPD_SAR_S);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_XPD_HALL_FORCE);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_HALL_PHASE_FORCE);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
hall_value = (Sens_Vp1 - Sens_Vp0) - (Sens_Vn1 - Sens_Vn0);
|
|
|
|
return hall_value;
|
|
}
|
|
|
|
int hall_sensor_read()
|
|
{
|
|
adc1_pad_init(ADC1_CHANNEL_0);
|
|
adc1_pad_init(ADC1_CHANNEL_3);
|
|
adc1_config_channel_atten(ADC1_CHANNEL_0, ADC_ATTEN_0db);
|
|
adc1_config_channel_atten(ADC1_CHANNEL_3, ADC_ATTEN_0db);
|
|
return hall_sensor_get_value();
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
INTERRUPT HANDLER
|
|
---------------------------------------------------------------*/
|
|
|
|
|
|
typedef struct rtc_isr_handler_ {
|
|
uint32_t mask;
|
|
intr_handler_t handler;
|
|
void* handler_arg;
|
|
SLIST_ENTRY(rtc_isr_handler_) next;
|
|
} rtc_isr_handler_t;
|
|
|
|
static SLIST_HEAD(rtc_isr_handler_list_, rtc_isr_handler_) s_rtc_isr_handler_list =
|
|
SLIST_HEAD_INITIALIZER(s_rtc_isr_handler_list);
|
|
portMUX_TYPE s_rtc_isr_handler_list_lock = portMUX_INITIALIZER_UNLOCKED;
|
|
static intr_handle_t s_rtc_isr_handle;
|
|
|
|
static void rtc_isr(void* arg)
|
|
{
|
|
uint32_t status = REG_READ(RTC_CNTL_INT_ST_REG);
|
|
rtc_isr_handler_t* it;
|
|
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
SLIST_FOREACH(it, &s_rtc_isr_handler_list, next) {
|
|
if (it->mask & status) {
|
|
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
(*it->handler)(it->handler_arg);
|
|
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
}
|
|
}
|
|
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
REG_WRITE(RTC_CNTL_INT_CLR_REG, status);
|
|
}
|
|
|
|
static esp_err_t rtc_isr_ensure_installed()
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
if (s_rtc_isr_handle) {
|
|
goto out;
|
|
}
|
|
|
|
REG_WRITE(RTC_CNTL_INT_ENA_REG, 0);
|
|
REG_WRITE(RTC_CNTL_INT_CLR_REG, UINT32_MAX);
|
|
err = esp_intr_alloc(ETS_RTC_CORE_INTR_SOURCE, 0, &rtc_isr, NULL, &s_rtc_isr_handle);
|
|
if (err != ESP_OK) {
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
return err;
|
|
}
|
|
|
|
|
|
esp_err_t rtc_isr_register(intr_handler_t handler, void* handler_arg, uint32_t rtc_intr_mask)
|
|
{
|
|
esp_err_t err = rtc_isr_ensure_installed();
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
rtc_isr_handler_t* item = malloc(sizeof(*item));
|
|
if (item == NULL) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
item->handler = handler;
|
|
item->handler_arg = handler_arg;
|
|
item->mask = rtc_intr_mask;
|
|
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
SLIST_INSERT_HEAD(&s_rtc_isr_handler_list, item, next);
|
|
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_isr_deregister(intr_handler_t handler, void* handler_arg)
|
|
{
|
|
rtc_isr_handler_t* it;
|
|
rtc_isr_handler_t* prev = NULL;
|
|
bool found = false;
|
|
portENTER_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
SLIST_FOREACH(it, &s_rtc_isr_handler_list, next) {
|
|
if (it->handler == handler && it->handler_arg == handler_arg) {
|
|
if (it == SLIST_FIRST(&s_rtc_isr_handler_list)) {
|
|
SLIST_REMOVE_HEAD(&s_rtc_isr_handler_list, next);
|
|
} else {
|
|
SLIST_REMOVE_AFTER(prev, next);
|
|
}
|
|
found = true;
|
|
break;
|
|
}
|
|
prev = it;
|
|
}
|
|
portEXIT_CRITICAL(&s_rtc_isr_handler_list_lock);
|
|
return found ? ESP_OK : ESP_ERR_INVALID_STATE;
|
|
}
|