kopia lustrzana https://github.com/espressif/esp-idf
421 wiersze
15 KiB
C
421 wiersze
15 KiB
C
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include <stdlib.h>
|
|
#include "spi_flash_chip_generic.h"
|
|
#include "spi_flash_defs.h"
|
|
#include "esp_log.h"
|
|
#include "string.h"
|
|
#include <sys/param.h> // For MIN/MAX
|
|
#include "hal/spi_flash_hal.h"
|
|
|
|
#define CMD_OPI_FLASH_MXIC(cmd) ((((~(cmd) & 0xff) << 8)) | ((cmd) & 0xff))
|
|
#define CMD_OPI_FLASH_MXIC_CHIP_ERASE 0x9F60
|
|
#define CMD_OPI_FLASH_MXIC_READ_STR 0x13EC
|
|
#define CMD_OPI_FLASH_MXIC_READ_DTR 0x11EE
|
|
#define CMD_OPI_FLASH_MXIC_RDCR2 0x8E71
|
|
#define CMD_OPI_FLASH_MXIC_WRCR2 0x8D72
|
|
|
|
/* Driver for MXIC OPI flash chip */
|
|
static const char chip_name[] = "mxic (opi)";
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_probe(esp_flash_t *chip, uint32_t flash_id)
|
|
{
|
|
/* Check manufacturer and product IDs match our desired masks */
|
|
const uint8_t MFG_ID = 0xC2;
|
|
if (flash_id >> 16 != MFG_ID) {
|
|
return ESP_ERR_NOT_FOUND;
|
|
}
|
|
|
|
if (chip->read_mode < SPI_FLASH_OPI_FLAG) {
|
|
// The code here serve for opi flash under opi mode only, for ordinary mxic chip, go `spi_flash_chip_mxic.c`
|
|
return ESP_ERR_NOT_FOUND;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
spi_flash_caps_t spi_flash_chip_mxic_opi_get_caps(esp_flash_t *chip)
|
|
{
|
|
spi_flash_caps_t caps_flags = 0;
|
|
caps_flags |= SPI_FLASH_CHIP_CAP_32MB_SUPPORT;
|
|
// flash-suspend is not supported yet. // IDF-3852
|
|
// reading unique id is not supported.
|
|
return caps_flags;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_set_write_protect(esp_flash_t *chip, bool write_protect)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
spi_flash_trans_t t = {};
|
|
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
|
|
if(write_protect) {
|
|
t.command = CMD_OPI_FLASH_MXIC(CMD_WRDI);
|
|
} else {
|
|
t.command = CMD_OPI_FLASH_MXIC(CMD_WREN);
|
|
}
|
|
err = chip->host->driver->common_command(chip->host, &t);
|
|
}
|
|
|
|
bool wp_read;
|
|
err = chip->chip_drv->get_chip_write_protect(chip, &wp_read);
|
|
if (err == ESP_OK && wp_read != write_protect) {
|
|
err = ESP_ERR_NOT_FOUND;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void spi_flash_chip_mxic_opi_get_data_length_zoom(esp_flash_io_mode_t io_mode, uint32_t *length_zoom)
|
|
{
|
|
/* Under STR mode, one byte occupies one single clock. While under DTR mode, one byte occupies half clock.
|
|
For exmaple, if an operation needs 3 clock dummy, host send 3 dummy bytes under STR mode, while 6 dummy bytes under DTR mode.
|
|
Therefore, we need to adjust data zoom to fit the clock here. */
|
|
assert((io_mode == SPI_FLASH_OPI_STR) || (io_mode == SPI_FLASH_OPI_DTR));
|
|
*length_zoom = (io_mode == SPI_FLASH_OPI_STR) ? 1 : 2;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_read_id(esp_flash_t *chip, uint32_t* out_chip_id)
|
|
{
|
|
uint64_t id_buf = 0;
|
|
uint32_t length_zoom;
|
|
spi_flash_chip_mxic_opi_get_data_length_zoom(chip->read_mode, &length_zoom);
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC(CMD_RDID),
|
|
.miso_len = 3 * length_zoom,
|
|
.dummy_bitlen = 4 * length_zoom,
|
|
.address_bitlen = 32,
|
|
.miso_data = ((uint8_t*) &id_buf),
|
|
};
|
|
|
|
chip->host->driver->common_command(chip->host, &t);
|
|
|
|
if(chip->read_mode == SPI_FLASH_OPI_DTR) {
|
|
// Adjust the id_buf in DTR mode, because in DTR mode, the data back in STR rule.
|
|
// So it looks like [MD, MD, MT, MT, MID, MID], adjust it to [MD, MT, MID] here.
|
|
ESP_EARLY_LOGV(chip_name, "raw_chip_id: %llx\n", id_buf);
|
|
id_buf = (id_buf & 0xff) | ((id_buf & 0xff0000) >> 8) | ((id_buf & 0xff00000000) >> 16);
|
|
} else {
|
|
ESP_EARLY_LOGV(chip_name, "raw_chip_id: %X\n", id_buf);
|
|
}
|
|
|
|
uint32_t raw_flash_id = __builtin_bswap32(id_buf);
|
|
if (raw_flash_id == 0xFFFFFF || raw_flash_id == 0) {
|
|
ESP_EARLY_LOGE(chip_name, "no response\n");
|
|
return ESP_ERR_FLASH_NO_RESPONSE;
|
|
}
|
|
|
|
*out_chip_id = (raw_flash_id >> 8);
|
|
ESP_EARLY_LOGV(chip_name, "chip_id: %X\n", *out_chip_id);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_read_reg(esp_flash_t *chip, spi_flash_register_t reg_id, uint32_t* out_reg)
|
|
{
|
|
uint32_t stat_buf = 0;
|
|
uint32_t length_zoom;
|
|
spi_flash_chip_mxic_opi_get_data_length_zoom(chip->read_mode, &length_zoom);
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC(CMD_RDSR),
|
|
.miso_data = ((uint8_t*) &stat_buf),
|
|
.miso_len = 1 * length_zoom,
|
|
.address_bitlen = 32,
|
|
.dummy_bitlen = 4 * length_zoom,
|
|
};
|
|
esp_err_t err = chip->host->driver->common_command(chip->host, &t);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
// For DTR mode, RDSR result like [SR1, SR1], just keeping one SR1.
|
|
*out_reg = (stat_buf & 0xff);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_get_write_protect(esp_flash_t *chip, bool *out_write_protected)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
uint32_t status;
|
|
assert(out_write_protected!=NULL);
|
|
err = chip->chip_drv->read_reg(chip, SPI_FLASH_REG_STATUS, &status);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
*out_write_protected = ((status & SR_WREN) == 0);
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_erase_chip(esp_flash_t *chip)
|
|
{
|
|
esp_err_t err;
|
|
|
|
err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
}
|
|
|
|
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
|
|
// Do erase chip here.
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC_CHIP_ERASE,
|
|
};
|
|
err = chip->host->driver->common_command(chip->host, &t);
|
|
chip->busy = 1;
|
|
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
|
|
err = chip->chip_drv->wait_idle(chip, ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
|
|
#else
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->chip_erase_timeout);
|
|
#endif
|
|
}
|
|
// Ensure WEL is 0, even if the erase failed.
|
|
if (err == ESP_ERR_NOT_SUPPORTED) {
|
|
chip->chip_drv->set_chip_write_protect(chip, true);
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_erase_sector(esp_flash_t *chip, uint32_t start_address)
|
|
{
|
|
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
}
|
|
//The chip didn't accept the previous write command. Ignore this in preparationstage.
|
|
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC(CMD_SECTOR_ERASE_4B),
|
|
.address_bitlen = 32,
|
|
.address = start_address,
|
|
};
|
|
err = chip->host->driver->common_command(chip->host, &t);
|
|
chip->busy = 1;
|
|
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
|
|
err = chip->chip_drv->wait_idle(chip, ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
|
|
#else
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->sector_erase_timeout);
|
|
#endif
|
|
}
|
|
// Ensure WEL is 0, even if the erase failed.
|
|
if (err == ESP_ERR_NOT_SUPPORTED) {
|
|
err = chip->chip_drv->set_chip_write_protect(chip, true);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_erase_block(esp_flash_t *chip, uint32_t start_address)
|
|
{
|
|
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK) {
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
}
|
|
//The chip didn't accept the previous write command. Ignore this in preparationstage.
|
|
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC(CMD_LARGE_BLOCK_ERASE_4B),
|
|
.address_bitlen = 32,
|
|
.address = start_address,
|
|
};
|
|
err = chip->host->driver->common_command(chip->host, &t);
|
|
chip->busy = 1;
|
|
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
|
|
err = chip->chip_drv->wait_idle(chip, ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
|
|
#else
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->block_erase_timeout);
|
|
#endif
|
|
}
|
|
// Ensure WEL is 0, even if the erase failed.
|
|
if (err == ESP_ERR_NOT_SUPPORTED) {
|
|
err = chip->chip_drv->set_chip_write_protect(chip, true);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_page_program(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
{
|
|
esp_err_t err;
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
|
|
//The chip didn't accept the previous write command. Ignore this in preparationstage.
|
|
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
|
|
// Perform the actual Page Program command
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC(CMD_PROGRAM_PAGE_4B),
|
|
.address_bitlen = 32,
|
|
.address = address,
|
|
.mosi_len = length,
|
|
.mosi_data = buffer,
|
|
};
|
|
chip->host->driver->common_command(chip->host, &t);
|
|
chip->busy = 1;
|
|
|
|
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->page_program_timeout);
|
|
}
|
|
// Ensure WEL is 0, even if the page program failed.
|
|
if (err == ESP_ERR_NOT_SUPPORTED) {
|
|
err = chip->chip_drv->set_chip_write_protect(chip, true);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_write(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
const uint32_t page_size = chip->chip_drv->page_size;
|
|
uint32_t align_address;
|
|
uint8_t temp_buffer[64]; //spiflash hal max length of write no longer than 64byte
|
|
|
|
while (err == ESP_OK && length > 0) {
|
|
memset(temp_buffer, 0xFF, sizeof(temp_buffer));
|
|
uint32_t page_len = chip->host->driver->write_data_slicer(chip->host, address, length, &align_address, page_size);
|
|
uint32_t left_off = address - align_address;
|
|
uint32_t write_len = MIN(align_address + page_len, address + length) - address;
|
|
memcpy(temp_buffer + left_off, buffer, write_len);
|
|
|
|
err = chip->chip_drv->set_chip_write_protect(chip, false);
|
|
if (err == ESP_OK && length > 0) {
|
|
err = chip->chip_drv->program_page(chip, temp_buffer, align_address, page_len);
|
|
|
|
address += write_len;
|
|
buffer = (void *)((intptr_t)buffer + write_len);
|
|
length -= write_len;
|
|
}
|
|
}
|
|
// The caller is responsible to do host->driver->flush_cache, because this function may be
|
|
// called in small pieces. Frequency call of flush cache will do harm to the performance.
|
|
return err;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_mxic_opi_get_io_mode(esp_flash_t *chip, esp_flash_io_mode_t* out_io_mode)
|
|
{
|
|
uint32_t stat_buf = 0;
|
|
uint32_t length_zoom;
|
|
spi_flash_chip_mxic_opi_get_data_length_zoom(chip->read_mode, &length_zoom);
|
|
|
|
spi_flash_trans_t t = {
|
|
.command = CMD_OPI_FLASH_MXIC_RDCR2,
|
|
.dummy_bitlen = 4 * length_zoom,
|
|
.miso_data = ((uint8_t*) &stat_buf),
|
|
.miso_len = 1 * length_zoom,
|
|
.address_bitlen = 32,
|
|
};
|
|
esp_err_t err = chip->host->driver->common_command(chip->host, &t);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
|
|
// For DTR mode, RDSR result like [CR1, CR1], just keeping one CR1.
|
|
switch (stat_buf & 0xff)
|
|
{
|
|
case 0x1:
|
|
*out_io_mode = SPI_FLASH_OPI_STR;
|
|
break;
|
|
case 0x2:
|
|
*out_io_mode = SPI_FLASH_OPI_DTR;
|
|
break;
|
|
default:
|
|
// wrong mode.
|
|
*out_io_mode = 0;
|
|
break;
|
|
}
|
|
if (*out_io_mode != chip->read_mode) {
|
|
// Current chip mode is not the mode we configured.
|
|
*out_io_mode = 0;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t spi_flash_chip_xmic_opi_set_io_mode(esp_flash_t *chip)
|
|
{
|
|
// TODO: configure opi flash chip set io mode, only useful for external flash currently.
|
|
// For main flash, we already set io mode when chip starts up. But for external flash,
|
|
// We need to set mode when flash initialized, so keeping this for future usage.
|
|
return ESP_OK;
|
|
}
|
|
|
|
// This function should only be called after opi mode initialization. So, only configure for OPI-STR/OPI-DTR mode
|
|
// not support other mode in this file, return `ESP_ERR_FLASH_NOT_INITIALISED` directely.
|
|
esp_err_t spi_flash_chip_xmic_opi_config_host_io_mode(esp_flash_t *chip, uint32_t flags)
|
|
{
|
|
uint32_t dummy_cyclelen_base;
|
|
uint32_t addr_bitlen;
|
|
uint32_t read_command;
|
|
esp_flash_io_mode_t read_mode = chip->read_mode;
|
|
|
|
switch (read_mode & 0xFFFF) {
|
|
case SPI_FLASH_OPI_STR:
|
|
addr_bitlen = SPI_FLASH_OPISTR_ADDR_BITLEN;
|
|
dummy_cyclelen_base = SPI_FLASH_OPISTR_DUMMY_BITLEN;
|
|
read_command = CMD_OPI_FLASH_MXIC_READ_STR;
|
|
break;
|
|
case SPI_FLASH_OPI_DTR:
|
|
addr_bitlen = SPI_FLASH_OPIDTR_ADDR_BITLEN;
|
|
dummy_cyclelen_base = SPI_FLASH_OPIDTR_DUMMY_BITLEN;
|
|
read_command = CMD_OPI_FLASH_MXIC_READ_DTR;
|
|
break;
|
|
default:
|
|
return ESP_ERR_FLASH_NOT_INITIALISED;
|
|
}
|
|
|
|
return chip->host->driver->configure_host_io_mode(chip->host, read_command, addr_bitlen, dummy_cyclelen_base, read_mode);
|
|
}
|
|
|
|
// Most of mxic opi implementations are totally different from that is generic.
|
|
// Replace them to opi implementation.
|
|
const spi_flash_chip_t esp_flash_chip_mxic_opi = {
|
|
.name = chip_name,
|
|
.timeout = &spi_flash_chip_generic_timeout,
|
|
.probe = spi_flash_chip_mxic_opi_probe,
|
|
.reset = spi_flash_chip_generic_reset,
|
|
.detect_size = spi_flash_chip_generic_detect_size,
|
|
.erase_chip = spi_flash_chip_mxic_opi_erase_chip,
|
|
.erase_sector = spi_flash_chip_mxic_opi_erase_sector,
|
|
.erase_block = spi_flash_chip_mxic_opi_erase_block,
|
|
.sector_size = 4 * 1024,
|
|
.block_erase_size = 64 * 1024,
|
|
|
|
.get_chip_write_protect = spi_flash_chip_mxic_opi_get_write_protect,
|
|
.set_chip_write_protect = spi_flash_chip_mxic_opi_set_write_protect,
|
|
|
|
.num_protectable_regions = 0,
|
|
.protectable_regions = NULL,
|
|
.get_protected_regions = NULL,
|
|
.set_protected_regions = NULL,
|
|
|
|
.read = spi_flash_chip_generic_read,
|
|
.write = spi_flash_chip_mxic_opi_write,
|
|
.program_page = spi_flash_chip_mxic_opi_page_program,
|
|
.page_size = 256,
|
|
.write_encrypted = spi_flash_chip_generic_write_encrypted,
|
|
|
|
.wait_idle = spi_flash_chip_generic_wait_idle,
|
|
|
|
.set_io_mode = spi_flash_chip_xmic_opi_set_io_mode,
|
|
.get_io_mode = spi_flash_chip_mxic_opi_get_io_mode,
|
|
|
|
.read_id = spi_flash_chip_mxic_opi_read_id,
|
|
.read_reg = spi_flash_chip_mxic_opi_read_reg,
|
|
.yield = spi_flash_chip_generic_yield,
|
|
.sus_setup = spi_flash_chip_generic_suspend_cmd_conf,
|
|
.read_unique_id = spi_flash_chip_generic_read_unique_id_none,
|
|
.get_chip_caps = spi_flash_chip_mxic_opi_get_caps,
|
|
.config_host_io_mode = spi_flash_chip_xmic_opi_config_host_io_mode,
|
|
};
|