esp-idf/components/esp32h2/esp_hmac.c

133 wiersze
4.9 KiB
C

// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <string.h>
#include "driver/periph_ctrl.h"
#include "esp32h2/rom/hmac.h"
#include "esp32h2/rom/ets_sys.h"
#include "esp_hmac.h"
#include "esp_crypto_lock.h"
#include "hal/hmac_hal.h"
#define SHA256_BLOCK_SZ 64
#define SHA256_PAD_SZ 8
/**
* @brief Apply the HMAC padding without the embedded length.
*
* @note This function does not check the data length, it is the responsibility of the other functions in this
* module to make sure that \c data_len is at most SHA256_BLOCK_SZ - 1 so the padding fits in.
* Otherwise, this function has undefined behavior.
* Note however, that for the actual HMAC implementation on ESP32H2, the length also needs to be applied at the end
* of the block. This function alone deosn't do that.
*/
static void write_and_padd(uint8_t *block, const uint8_t *data, uint16_t data_len)
{
memcpy(block, data, data_len);
// Apply a one bit, followed by zero bits (refer to the ESP32H2 TRM).
block[data_len] = 0x80;
bzero(block + data_len + 1, SHA256_BLOCK_SZ - data_len - 1);
}
esp_err_t esp_hmac_calculate(hmac_key_id_t key_id,
const void *message,
size_t message_len,
uint8_t *hmac)
{
const uint8_t *message_bytes = (const uint8_t *)message;
if (!message || !hmac) {
return ESP_ERR_INVALID_ARG;
}
if (key_id >= HMAC_KEY_MAX) {
return ESP_ERR_INVALID_ARG;
}
esp_crypto_hmac_lock_acquire();
// We also enable SHA and DS here. SHA is used by HMAC, DS will otherwise hold SHA in reset state.
periph_module_enable(PERIPH_HMAC_MODULE);
periph_module_enable(PERIPH_SHA_MODULE);
periph_module_enable(PERIPH_DS_MODULE);
hmac_hal_start();
uint32_t conf_error = hmac_hal_configure(HMAC_OUTPUT_USER, key_id);
if (conf_error) {
esp_crypto_hmac_lock_release();
return ESP_FAIL;
}
if (message_len + 1 + SHA256_PAD_SZ <= SHA256_BLOCK_SZ) {
// If message including padding is only one block...
// Last message block, so apply SHA-256 padding rules in software
uint8_t block[SHA256_BLOCK_SZ];
uint64_t bit_len = __builtin_bswap64(message_len * 8 + 512);
write_and_padd(block, message_bytes, message_len);
// Final block: append the bit length in this block and signal padding to peripheral
memcpy(block + SHA256_BLOCK_SZ - sizeof(bit_len),
&bit_len, sizeof(bit_len));
hmac_hal_write_one_block_512(block);
} else {
// If message including padding is needs more than one block
// write all blocks without padding except the last one
size_t remaining_blocks = message_len / SHA256_BLOCK_SZ;
for (int i = 1; i < remaining_blocks; i++) {
hmac_hal_write_block_512(message_bytes);
message_bytes += SHA256_BLOCK_SZ;
hmac_hal_next_block_normal();
}
// If message fits into one block but without padding, we must not write another block.
if (remaining_blocks) {
hmac_hal_write_block_512(message_bytes);
message_bytes += SHA256_BLOCK_SZ;
}
size_t remaining = message_len % SHA256_BLOCK_SZ;
// Last message block, so apply SHA-256 padding rules in software
uint8_t block[SHA256_BLOCK_SZ];
uint64_t bit_len = __builtin_bswap64(message_len * 8 + 512);
// If the remaining message and appended padding doesn't fit into a single block, we have to write an
// extra block with the rest of the message and potential padding first.
if (remaining >= SHA256_BLOCK_SZ - SHA256_PAD_SZ) {
write_and_padd(block, message_bytes, remaining);
hmac_hal_next_block_normal();
hmac_hal_write_block_512(block);
bzero(block, SHA256_BLOCK_SZ);
} else {
write_and_padd(block, message_bytes, remaining);
}
memcpy(block + SHA256_BLOCK_SZ - sizeof(bit_len),
&bit_len, sizeof(bit_len));
hmac_hal_next_block_padding();
hmac_hal_write_block_512(block);
}
// Read back result (bit swapped)
hmac_hal_read_result_256(hmac);
periph_module_disable(PERIPH_DS_MODULE);
periph_module_disable(PERIPH_SHA_MODULE);
periph_module_disable(PERIPH_HMAC_MODULE);
esp_crypto_hmac_lock_release();
return ESP_OK;
}