esp-idf/components/lwip/port/esp32/netif/wlanif.c

248 wiersze
7.1 KiB
C

/**
* @file
* Ethernet Interface Skeleton
*
*/
/*
* Copyright (c) 2001-2004 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#include "lwip/opt.h"
#include "lwip/def.h"
#include "lwip/mem.h"
#include "lwip/pbuf.h"
#include "lwip/stats.h"
#include "lwip/snmp.h"
#include "lwip/ethip6.h"
#include "netif/etharp.h"
#include "netif/wlanif.h"
#include <stdio.h>
#include <string.h>
#include "tcpip_adapter.h"
/**
* In this function, the hardware should be initialized.
* Called from ethernetif_init().
*
* @param netif the already initialized lwip network interface structure
* for this ethernetif
*/
static void
low_level_init(struct netif *netif)
{
/* set MAC hardware address length */
netif->hwaddr_len = ETHARP_HWADDR_LEN;
/* set MAC hardware address */
/* maximum transfer unit */
netif->mtu = 1500;
/* device capabilities */
/* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */
netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP;
#if ESP_LWIP
#if LWIP_IGMP
netif->flags |= NETIF_FLAG_IGMP;
#endif
#endif
#if !ESP_L2_TO_L3_COPY
netif->l2_buffer_free_notify = esp_wifi_internal_free_rx_buffer;
#endif
}
/**
* This function should do the actual transmission of the packet. The packet is
* contained in the pbuf that is passed to the function. This pbuf
* might be chained.
*
* @param netif the lwip network interface structure for this ethernetif
* @param p the MAC packet to send (e.g. IP packet including MAC addresses and type)
* @return ERR_OK if the packet could be sent
* an err_t value if the packet couldn't be sent
*
* @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to
* strange results. You might consider waiting for space in the DMA queue
* to become availale since the stack doesn't retry to send a packet
* dropped because of memory failure (except for the TCP timers).
*/
static err_t ESP_IRAM_ATTR
low_level_output(struct netif *netif, struct pbuf *p)
{
wifi_interface_t wifi_if = tcpip_adapter_get_esp_if(netif);
struct pbuf *q = p;
err_t ret;
if (wifi_if >= ESP_IF_MAX) {
return ERR_IF;
}
if(q->next == NULL) {
ret = esp_wifi_internal_tx(wifi_if, q->payload, q->len);
} else {
LWIP_DEBUGF(PBUF_DEBUG, ("low_level_output: pbuf is a list, application may has bug"));
q = pbuf_alloc(PBUF_RAW_TX, p->tot_len, PBUF_RAM);
if (q != NULL) {
q->l2_owner = NULL;
pbuf_copy(q, p);
} else {
return ERR_MEM;
}
ret = esp_wifi_internal_tx(wifi_if, q->payload, q->len);
pbuf_free(q);
}
return ret;
}
/**
* This function should be called when a packet is ready to be read
* from the interface. It uses the function low_level_input() that
* should handle the actual reception of bytes from the network
* interface. Then the type of the received packet is determined and
* the appropriate input function is called.
*
* @param netif the lwip network interface structure for this ethernetif
*/
void ESP_IRAM_ATTR
wlanif_input(struct netif *netif, void *buffer, u16_t len, void* eb)
{
struct pbuf *p;
if(!buffer || !netif_is_up(netif)) {
if (eb) {
esp_wifi_internal_free_rx_buffer(eb);
}
return;
}
#if (ESP_L2_TO_L3_COPY == 1)
p = pbuf_alloc(PBUF_RAW, len, PBUF_RAM);
if (p == NULL) {
ESP_STATS_DROP_INC(esp.wlanif_input_pbuf_fail);
esp_wifi_internal_free_rx_buffer(eb);
return;
}
p->l2_owner = NULL;
memcpy(p->payload, buffer, len);
esp_wifi_internal_free_rx_buffer(eb);
#else
p = pbuf_alloc(PBUF_RAW, len, PBUF_REF);
if (p == NULL){
ESP_STATS_DROP_INC(esp.wlanif_input_pbuf_fail);
esp_wifi_internal_free_rx_buffer(eb);
return;
}
p->payload = buffer;
p->l2_owner = netif;
p->l2_buf = eb;
#endif
/* full packet send to tcpip_thread to process */
if (netif->input(p, netif) != ERR_OK) {
LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
pbuf_free(p);
}
}
/**
* Should be called at the beginning of the program to set up the
* network interface. It calls the function low_level_init() to do the
* actual setup of the hardware.
*
* This function should be passed as a parameter to netif_add().
*
* @param netif the lwip network interface structure for this ethernetif
* @return ERR_OK if the loopif is initialized
* ERR_MEM if private data couldn't be allocated
* any other err_t on error
*/
err_t
wlanif_init(struct netif *netif)
{
LWIP_ASSERT("netif != NULL", (netif != NULL));
#if LWIP_NETIF_HOSTNAME
/* Initialize interface hostname */
#if ESP_LWIP
netif->hostname = "espressif";
#else
netif->hostname = "lwip";
#endif
#endif /* LWIP_NETIF_HOSTNAME */
/*
* Initialize the snmp variables and counters inside the struct netif.
* The last argument should be replaced with your link speed, in units
* of bits per second.
*/
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100);
/* We directly use etharp_output() here to save a function call.
* You can instead declare your own function an call etharp_output()
* from it if you have to do some checks before sending (e.g. if link
* is available...) */
netif->output = etharp_output;
#if LWIP_IPV6
netif->output_ip6 = ethip6_output;
#endif /* LWIP_IPV6 */
netif->linkoutput = low_level_output;
/* initialize the hardware */
low_level_init(netif);
return ERR_OK;
}
err_t wlanif_init_sta(struct netif *netif) {
netif->name[0] = 's';
netif->name[1] = 't';
return wlanif_init(netif);
}
err_t wlanif_init_ap(struct netif *netif) {
netif->name[0] = 'a';
netif->name[1] = 'p';
return wlanif_init(netif);
}