Historia

Martin Valik 68ff1b8c07 Bugfix: omit MSC reset during initialization		2022-01-27 10:03:40 +01:00
..
device	usb: Extend CDC device with second CDC channel	2022-01-05 08:18:03 +01:00
host	Bugfix: omit MSC reset during initialization	2022-01-27 10:03:40 +01:00
README.md	…

README.md

USB-OTG Examples

See the README.md file in the upper level examples directory for more information about examples.

Common Pin Assignments

Pin assignment is only needed for ESP chips that have an USB-OTG peripheral. If your board doesn't have a USB connector connected to the USB-OTG dedicated GPIOs, you may have to DIY a cable and connect D+ and D- to the pins listed below.

ESP BOARD          USB CONNECTOR (type A)
                          --
                         | || VCC
[USBPHY_DM_NUM]  ------> | || D-
[USBPHY_DP_NUM]  ------> | || D+
                         | || GND
                          --

Refer to soc/usb_pins.h to find the real GPIO number of USBPHY_DP_NUM and USBPHY_DM_NUM.

	USB_DP	USB_DM
ESP32-S2/S3	GPIO20	GPIO19