esp-idf/docs/en/get-started/linux-setup.rst

50 wiersze
2.1 KiB
ReStructuredText

*********************************************
Standard Setup of Toolchain for Linux
*********************************************
:link_to_translation:`zh_CN:[中文]`
Install Prerequisites
=====================
To compile with ESP-IDF you need to get the following packages. The command to run depends on which distribution of Linux you are using:
- Ubuntu and Debian::
sudo apt-get install git wget flex bison gperf python3 python3-pip python3-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0
- CentOS 7 & 8::
sudo yum -y update && sudo yum install git wget flex bison gperf python3 python3-pip python3-setuptools cmake ninja-build ccache dfu-util libusbx
CentOS 7 is still supported but CentOS version 8 is recommended for a better user experience.
- Arch::
sudo pacman -S --needed gcc git make flex bison gperf python-pip cmake ninja ccache dfu-util libusb
.. note::
- CMake version 3.5 or newer is required for use with ESP-IDF. Older Linux distributions may require updating, enabling of a "backports" repository, or installing of a "cmake3" package rather than "cmake".
- If you do not see your Linux distribution in the above list then please check its documentation to find out which command to use for package installation.
Additional Tips
===============
Permission issues /dev/ttyUSB0
------------------------------
With some Linux distributions you may get the ``Failed to open port /dev/ttyUSB0`` error message when flashing the {IDF_TARGET_NAME}. :ref:`This can be solved by adding the current user to the dialout group<linux-dialout-group>`.
Python compatibility
====================
ESP-IDF supports Python 3.7 or newer. It is recommended to upgrade your operating system to a recent version satisfying this requirement. Other options include the installation of Python from `sources <https://www.python.org/downloads/>`_ or the use of a Python version management system such as `pyenv <https://github.com/pyenv/pyenv>`_.
Next Steps
==========
To carry on with development environment setup, proceed to :ref:`get-started-get-esp-idf`.
.. _AUR: https://wiki.archlinux.org/index.php/Arch_User_Repository