esp-idf/components/esp_wifi/wifi_apps/include/esp_nan.h

205 wiersze
6.5 KiB
C

/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "esp_log.h"
#include "esp_err.h"
#include "lwip/inet.h"
#include "esp_wifi_types.h"
#ifdef __cplusplus
extern "C" {
#endif
#define WIFI_NAN_CONFIG_DEFAULT() { \
.op_channel = 6, \
.master_pref = 2, \
.scan_time = 3, \
.warm_up_sec = 5, \
};
#define NDP_STATUS_ACCEPTED 1
#define NDP_STATUS_REJECTED 2
#define NAN_MAX_PEERS_RECORD 15
#define ESP_NAN_PUBLISH 2
#define ESP_NAN_SUBSCRIBE 1
/** Parameters of a peer service record */
struct nan_peer_record {
uint8_t peer_svc_id; /**< Identifier of Peer's service */
uint8_t own_svc_id; /**< Identifier of own service associated with Peer */
uint8_t peer_nmi[6]; /**< Peer's NAN Management Interface address */
uint8_t peer_svc_type; /**< Peer's service type (Publish/Subscribe) */
uint8_t ndp_id; /**< Specifies if the peer has any active datapath */
uint8_t peer_ndi[6]; /**< Peer's NAN Data Interface address, only valid when ndp_id is non-zero */
};
/**
* @brief Start NAN Discovery with provided configuration
*
* @attention This API should be called after esp_wifi_init().
*
* @param nan_cfg NAN related parameters to be configured.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_nan_start(const wifi_nan_config_t *nan_cfg);
/**
* @brief Stop NAN Discovery, end NAN Services and Datapaths
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_nan_stop(void);
/**
* @brief Start Publishing a service to the NAN Peers in vicinity
*
* @attention This API should be called after esp_wifi_nan_start().
*
* @param publish_cfg Configuration parameters for publishing a service.
* @param ndp_resp_needed Setting this true will require user response for every NDP Req using esp_wifi_nan_datapath_resp API.
*
* @return
* - non-zero: Publish service identifier
* - zero: failed
*/
uint8_t esp_wifi_nan_publish_service(const wifi_nan_publish_cfg_t *publish_cfg, bool ndp_resp_needed);
/**
* @brief Subscribe for a service within the NAN cluster
*
* @attention This API should be called after esp_wifi_nan_start().
*
* @param subscribe_cfg Configuration parameters for subscribing for a service.
*
* @return
* - non-zero: Subscribe service identifier
* - zero: failed
*/
uint8_t esp_wifi_nan_subscribe_service(const wifi_nan_subscribe_cfg_t *subscribe_cfg);
/**
* @brief Send a follow-up message to the NAN Peer with matched service
*
* @attention This API should be called after a NAN service is discovered due to a match.
*
* @param fup_params Configuration parameters for sending a Follow-up message.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_nan_send_message(wifi_nan_followup_params_t *fup_params);
/**
* @brief Cancel a NAN service
*
* @param service_id Publish/Subscribe service id to be cancelled.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_nan_cancel_service(uint8_t service_id);
/**
* @brief Send NAN Datapath Request to a NAN Publisher with matched service
*
* @attention This API should be called by the Subscriber after a match occurs with a Publisher.
*
* @param req NAN Datapath Request parameters.
*
* @return
* - non-zero NAN Datapath identifier: If NAN datapath req was accepted by publisher
* - zero: If NAN datapath req was rejected by publisher or a timeout occurs
*/
uint8_t esp_wifi_nan_datapath_req(wifi_nan_datapath_req_t *req);
/**
* @brief Respond to a NAN Datapath request with Accept or Reject
*
* @attention This API should be called if ndp_resp_needed is set True by the Publisher and
* a WIFI_EVENT_NDP_INDICATION event is received due to an incoming NDP request.
*
* @param resp NAN Datapath Response parameters.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_nan_datapath_resp(wifi_nan_datapath_resp_t *resp);
/**
* @brief Terminate a NAN Datapath
*
* @param req NAN Datapath end request parameters.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_nan_datapath_end(wifi_nan_datapath_end_req_t *req);
/**
* @brief Get IPv6 Link Local address using MAC address
*
* @param[out] ip6 Derived IPv6 Link Local address.
* @param[in] mac_addr Input MAC Address.
*/
void esp_wifi_nan_get_ipv6_linklocal_from_mac(ip6_addr_t *ip6, uint8_t *mac_addr);
/**
* brief Get own Service information from Service ID OR Name.
*
* @attention If service information is to be fetched from service name, set own_svc_id as zero.
*
* @param[inout] own_svc_id As input, it indicates Service ID to search for.
* As output, it indicates Service ID of the service found using Service Name.
* @param[inout] svc_name As input, it indicates Service Name to search for.
* As output, it indicates Service Name of the service found using Service ID.
* @param[out] num_peer_records Number of peers discovered by corresponding service.
* @return
* - ESP_OK: succeed
* - ESP_FAIL: failed
*/
esp_err_t esp_wifi_nan_get_own_svc_info(uint8_t *own_svc_id, char *svc_name, int *num_peer_records);
/**
* brief Get a list of Peers discovered by the given Service.
*
* @param[inout] num_peer_records As input param, it stores max peers peer_record can hold.
* As output param, it specifies the actual number of peers this API returns.
* @param own_svc_id Service ID of own service.
* @param[out] peer_record Pointer to first peer record.
* @return
* - ESP_OK: succeed
* - ESP_FAIL: failed
*/
esp_err_t esp_wifi_nan_get_peer_records(int *num_peer_records, uint8_t own_svc_id, struct nan_peer_record *peer_record);
/**
* brief Find Peer's Service information using Peer MAC and optionally Service Name.
*
* @param svc_name Service Name of the published/subscribed service.
* @param peer_mac Peer's NAN Management Interface MAC address.
* @param[out] peer_info Peer's service information structure.
* @return
* - ESP_OK: succeed
* - ESP_FAIL: failed
*/
esp_err_t esp_wifi_nan_get_peer_info(char *svc_name, uint8_t *peer_mac, struct nan_peer_record *peer_info);
#ifdef __cplusplus
}
#endif