esp-idf/examples/mesh/internal_transceiver
qiyueixa bb9e73c864 mesh: update libs
1. use pbkdf2_sha1() to encrypted mesh ie key.
2. fix esp_mesh_waive_root().
3. fix esp_mesh_stop().
4. fix xon issues.
2018-05-20 15:28:38 +08:00
..
main mesh: update libs 2018-05-20 15:28:38 +08:00
Makefile
README.md

README.md

Mesh Internal Transceiver Example

This example demonstrates how to use the mesh APIs to set up a mesh network, send and receive messages over the mesh network and etc.

Features Demonstrated

  • mesh initialization

  • mesh configuration

  • mesh start

  • mesh event handler

  • root send and receive

  • other nodes receive

Run make menuconfig to configure the mesh network channel, router SSID, router password and mesh softAP settings.

When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are. The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5. Root continuously sends an On / Off control message to all devices in its routing table. Devices including root itself receive this message and do the On / Off.