mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/wifi
Historia
Shreyas Sheth 756b46ca96 esp_wifi: WPA3 SAE H2E support for station 
Mandate sta threshold wpa3 for ssid after receiving transition disable
bit from AP
 		2022-08-18 02:55:51 +05:30
..
espnow fix write to null pointer if malloc failed 2022-08-02 20:42:38 +08:00
fast_scan Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
ftm fix possible memory leak if report level not set 2022-08-02 20:42:44 +08:00
getting_started esp_wifi: WPA3 SAE H2E support for station 2022-08-18 02:55:51 +05:30
iperf Added bandwidth limitaion option to iperf test scripts 2022-04-06 10:44:31 +00:00
power_save light sleep: add wifi power save example for esp32s3 2021-08-04 21:31:45 +08:00
roaming esp_wifi: Add APIs to check BTM and RRM support of connected AP 2022-06-14 14:49:51 +05:30
scan Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
smart_config esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA 2021-01-19 11:55:44 +08:00
wifi_eap_fast esp_wifi: Add an example for EAP-FAST. 2022-02-10 15:55:21 +05:30
wifi_easy_connect/dpp-enrollee esp_example: Enable MbedTLS for DPP enrollee by default 2022-04-20 10:08:45 +00:00
wifi_enterprise esp_example: Enable GCMP, GMAC for 192 bit config 2022-06-24 17:37:06 +05:30
wps Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
README.md examples: create a new folder structure for generic network examples 2021-07-26 12:25:19 +02:00

README.md

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP..
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains a example using 802.11k and 802.11v APIs.
  • scan shows how to scan for all the available APs.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.