mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/bluetooth/.build-test-rules.yml

335 wiersze
8.3 KiB
YAML
Czysty Bezpośredni odnośnik Wina Historia

# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
.bt_default_depends: &bt_default_depends
depends_components:
- bt
- esp_phy
- esp_coex
- nvs_flash
- esp_log
- mbedtls
- vfs
examples/bluetooth:
<<: *bt_default_depends
disable:
- if: SOC_BT_SUPPORTED != 1
examples/bluetooth/bluedroid/ble:
<<: *bt_default_depends
disable:
- if: SOC_BT_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- nvs_flash
- esp_coex
- esp_log
- esp_console
- mbedtls
- vfs
- esp_driver_gpio
- esp_driver_i2s
- esp_driver_uart
depends_filepatterns:
- examples/bluetooth/bluedroid/ble/pytest_ble_test.py
examples/bluetooth/bluedroid/ble/ble_hid_device_demo:
disable:
- if: SOC_BT_SUPPORTED != 1
depends_components:
- esp_driver_gpio
examples/bluetooth/bluedroid/ble/ble_throughput:
<<: *bt_default_depends
disable:
- if: SOC_BT_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- nvs_flash
- esp_coex
- esp_log
- esp_console
- mbedtls
- vfs
- esp_driver_gpio
- esp_driver_i2s
- esp_driver_uart
depends_filepatterns:
- examples/bluetooth/bluedroid/ble_50/pytest_ble_throughput_test.py
examples/bluetooth/bluedroid/ble_50:
<<: *bt_default_depends
disable:
- if: SOC_BLE_50_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- nvs_flash
- esp_coex
- esp_log
- esp_console
- mbedtls
- vfs
- esp_driver_gpio
- esp_driver_i2s
- esp_driver_uart
depends_filepatterns:
- examples/bluetooth/bluedroid/ble_50/pytest_ble50_test.py
examples/bluetooth/bluedroid/classic_bt:
disable:
- if: SOC_BT_CLASSIC_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- nvs_flash
- esp_log
- esp_console
- vfs
- esp_driver_gpio
- esp_driver_i2s
- esp_driver_uart
depends_filepatterns:
- components/driver/dac/**/*
- examples/bluetooth/bluedroid/esp_hid_host/**/*
- examples/bluetooth/bluedroid/classic_bt/pytest_classic_bt_test.py
- examples/bluetooth/bluedroid/classic_bt/bt_discovery/pytest_classic_bt_discovery_test.py
examples/bluetooth/bluedroid/coex/a2dp_gatts_coex:
<<: *bt_default_depends
disable:
- if: IDF_TARGET != "esp32"
temporary: true
reason: the other targets are not tested yet
depends_components:
- esp_driver_i2s
depends_filepatterns:
- components/driver/dac/**/*
examples/bluetooth/blufi:
disable:
- if: SOC_BT_SUPPORTED != 1
- if: SOC_WIFI_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- nvs_flash
- esp_log
- esp_console
- vfs
- esp_wifi
- esp_event
- mbedtls
examples/bluetooth/esp_ble_mesh:
disable:
- if: SOC_BLE_MESH_SUPPORTED != 1
# limit build configs
- if: CI_COMMIT_REF_NAME == "master" and (NIGHTLY_RUN == 0 and CONFIG_NAME not in ["default", "bluedroid", "nimble"])
depends_components:
- bt
- esp_phy
- esp_console
- vfs
- mbedtls
- touch_element
- esp_driver_gpio
depends_filepatterns:
- examples/bluetooth/esp_ble_mesh/common_components/**/*
examples/bluetooth/esp_ble_mesh/wifi_coexist:
disable:
- if: SOC_BLE_MESH_SUPPORTED != 1
- if: SOC_WIFI_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- esp_console
- vfs
- mbedtls
- esp_coex
- esp_wifi
- esp_netif
- esp_driver_gpio
depends_filepatterns:
- examples/bluetooth/esp_ble_mesh/common_components/**/*
examples/bluetooth/esp_hid_host:
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: temporarily test esp32
disable:
- if: SOC_BT_SUPPORTED != 1
examples/bluetooth/hci:
<<: *bt_default_depends
enable:
- if: IDF_TARGET == "esp32"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/hci/hci_common_component/**/*
examples/bluetooth/hci/controller_hci_uart_esp32:
<<: *bt_default_depends
enable:
- if: IDF_TARGET == "esp32"
depends_components:
- esp_driver_uart
examples/bluetooth/hci/controller_hci_uart_esp32c3_and_esp32s3:
<<: *bt_default_depends
enable:
- if: IDF_TARGET in ["esp32c3", "esp32s3"]
depends_components:
- esp_driver_uart
# config BT_NIMBLE_ENABLED does not depends on any soc cap
examples/bluetooth/nimble/ble_enc_adv_data:
<<: *bt_default_depends
enable:
- if: SOC_BLE_SUPPORTED == 1 and IDF_TARGET != "esp32"
temporary: true
reason: BLE5.0 not supported on esp32
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/ble_multi_adv:
<<: *bt_default_depends
enable:
- if: SOC_BLE_SUPPORTED == 1 and IDF_TARGET != "esp32"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/ble_multi_conn:
<<: *bt_default_depends
enable:
- if: SOC_ESP_NIMBLE_CONTROLLER == 1 and IDF_TARGET != "esp32c2"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/ble_periodic_adv:
<<: *bt_default_depends
enable:
- if: SOC_BLE_SUPPORTED == 1 and IDF_TARGET != "esp32"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/ble_periodic_sync:
<<: *bt_default_depends
enable:
- if: SOC_BLE_SUPPORTED == 1 and IDF_TARGET != "esp32"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/ble_phy:
<<: *bt_default_depends
enable:
- if: SOC_BLE_SUPPORTED == 1 and IDF_TARGET != "esp32"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/blecent:
<<: *bt_default_depends
disable:
- if: SOC_BLE_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- esp_event
- esp_coex
- esp_pm
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
- examples/bluetooth/nimble/blecent/**/*
- examples/bluetooth/nimble/power_save/**/*
- examples/bluetooth/nimble/pytest_nimble_test.py
examples/bluetooth/nimble/blemesh:
<<: *bt_default_depends
enable:
- if: IDF_TARGET == "esp32"
temporary: true
reason: the other targets are not tested yet
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/bleprph_wifi_coex:
disable:
- if: SOC_BLE_SUPPORTED != 1
- if: SOC_WIFI_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- esp_event
- esp_hid
- esp_wifi
- esp_coex
- nvs_flash
- lwip
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/hci:
<<: *bt_default_depends
disable:
- if: SOC_ESP_NIMBLE_CONTROLLER != 1
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
examples/bluetooth/nimble/power_save:
<<: *bt_default_depends
disable:
- if: SOC_BLE_SUPPORTED != 1
depends_components:
- bt
- esp_phy
- esp_event
- esp_coex
- esp_pm
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
- examples/bluetooth/nimble/blecent/**/*
- examples/bluetooth/nimble/power_save/**/*
- examples/bluetooth/nimble/pytest_nimble_test.py
examples/bluetooth/nimble/throughput_app:
<<: *bt_default_depends
disable:
- if: SOC_BLE_SUPPORTED != 1
depends_components:
- esp_driver_gpio
- esp_driver_uart
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
- examples/bluetooth/nimble/throughput_app/blecent_throughput/components/**/*
# Remove this special case for esp32c5 after IDF-8638
examples/bluetooth/nimble/throughput_app/blecent_throughput:
<<: *bt_default_depends
disable:
- if: SOC_BLE_SUPPORTED != 1
- if: IDF_TARGET == "esp32c5"
temporary: true
reason: c5 build failed. Fix in IDF-8638
depends_components:
- esp_driver_gpio
- esp_driver_uart
depends_filepatterns:
- examples/bluetooth/nimble/common/**/*
- examples/bluetooth/nimble/throughput_app/blecent_throughput/components/**/*
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik