mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/components/usb/hub.c

452 wiersze
17 KiB
C
Czysty Bezpośredni odnośnik Wina Historia

/*
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/portmacro.h"
#include "esp_err.h"
#include "esp_heap_caps.h"
#include "esp_log.h"
#include "usb_private.h"
#include "hcd.h"
#include "hub.h"
#include "usb/usb_helpers.h"
/*
Implementation of the HUB driver that only supports the Root Hub with a single port. Therefore, we currently don't
implement the bare minimum to control the root HCD port.
*/
#define HUB_ROOT_PORT_NUM 1 // HCD only supports one port
#define HUB_ROOT_DEV_UID 1 // Unique device ID
#ifdef CONFIG_USB_HOST_HW_BUFFER_BIAS_IN
#define HUB_ROOT_HCD_PORT_FIFO_BIAS HCD_PORT_FIFO_BIAS_RX
#elif CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT
#define HUB_ROOT_HCD_PORT_FIFO_BIAS HCD_PORT_FIFO_BIAS_PTX
#else // CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED
#define HUB_ROOT_HCD_PORT_FIFO_BIAS HCD_PORT_FIFO_BIAS_BALANCED
#endif
// Hub driver action flags. LISTED IN THE ORDER THEY SHOULD BE HANDLED IN within hub_process(). Some actions are mutually exclusive
#define HUB_DRIVER_FLAG_ACTION_ROOT_EVENT 0x01
#define HUB_DRIVER_FLAG_ACTION_PORT_REQ 0x02
#define PORT_REQ_DISABLE 0x01
#define PORT_REQ_RECOVER 0x02
/**
* @brief Root port states
*
*/
typedef enum {
ROOT_PORT_STATE_NOT_POWERED, /**< Root port initialized and/or not powered */
ROOT_PORT_STATE_POWERED, /**< Root port is powered, device is not connected */
ROOT_PORT_STATE_DISABLED, /**< A device is connected but is disabled (i.e., not reset, no SOFs are sent) */
ROOT_PORT_STATE_ENABLED, /**< A device is connected, port has been reset, SOFs are sent */
ROOT_PORT_STATE_RECOVERY, /**< Root port encountered an error and needs to be recovered */
} root_port_state_t;
typedef struct {
// Dynamic members require a critical section
struct {
union {
struct {
uint32_t actions: 8;
uint32_t reserved24: 24;
};
uint32_t val;
} flags;
root_port_state_t root_port_state;
unsigned int port_reqs;
} dynamic;
// Single thread members don't require a critical section so long as they are never accessed from multiple threads
struct {
unsigned int root_dev_uid; // UID of the device connected to root port. 0 if no device connected
} single_thread;
// Constant members do no change after installation thus do not require a critical section
struct {
hcd_port_handle_t root_port_hdl;
usb_proc_req_cb_t proc_req_cb;
void *proc_req_cb_arg;
hub_event_cb_t event_cb;
void *event_cb_arg;
} constant;
} hub_driver_t;
static hub_driver_t *p_hub_driver_obj = NULL;
static portMUX_TYPE hub_driver_lock = portMUX_INITIALIZER_UNLOCKED;
const char *HUB_DRIVER_TAG = "HUB";
#define HUB_DRIVER_ENTER_CRITICAL_ISR() portENTER_CRITICAL_ISR(&hub_driver_lock)
#define HUB_DRIVER_EXIT_CRITICAL_ISR() portEXIT_CRITICAL_ISR(&hub_driver_lock)
#define HUB_DRIVER_ENTER_CRITICAL() portENTER_CRITICAL(&hub_driver_lock)
#define HUB_DRIVER_EXIT_CRITICAL() portEXIT_CRITICAL(&hub_driver_lock)
#define HUB_DRIVER_ENTER_CRITICAL_SAFE() portENTER_CRITICAL_SAFE(&hub_driver_lock)
#define HUB_DRIVER_EXIT_CRITICAL_SAFE() portEXIT_CRITICAL_SAFE(&hub_driver_lock)
#define HUB_DRIVER_CHECK(cond, ret_val) ({ \
if (!(cond)) { \
return (ret_val); \
} \
})
#define HUB_DRIVER_CHECK_FROM_CRIT(cond, ret_val) ({ \
if (!(cond)) { \
HUB_DRIVER_EXIT_CRITICAL(); \
return ret_val; \
} \
})
// ------------------------------------------------- Forward Declare ---------------------------------------------------
/**
* @brief HCD port callback for the root port
*
* - This callback is called from the context of the HCD, so any event handling should be deferred to hub_process()
* - Under the current HCD implementation, this callback should only be ever be called in an ISR
* - This callback needs to call proc_req_cb to ensure that hub_process() gets a chance to run
*
* @param port_hdl HCD port handle
* @param port_event HCD port event
* @param user_arg Callback argument
* @param in_isr Whether callback is in an ISR context
* @return Whether a yield is required
*/
static bool root_port_callback(hcd_port_handle_t port_hdl, hcd_port_event_t port_event, void *user_arg, bool in_isr);
// ---------------------- Callbacks ------------------------
static bool root_port_callback(hcd_port_handle_t port_hdl, hcd_port_event_t port_event, void *user_arg, bool in_isr)
{
HUB_DRIVER_ENTER_CRITICAL_SAFE();
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_FLAG_ACTION_ROOT_EVENT;
HUB_DRIVER_EXIT_CRITICAL_SAFE();
assert(in_isr); // Currently, this callback should only ever be called from an ISR context
return p_hub_driver_obj->constant.proc_req_cb(USB_PROC_REQ_SOURCE_HUB, in_isr, p_hub_driver_obj->constant.proc_req_cb_arg);
}
// ---------------------- Handlers -------------------------
static void root_port_handle_events(hcd_port_handle_t root_port_hdl)
{
hcd_port_event_t port_event = hcd_port_handle_event(root_port_hdl);
hub_event_data_t event_data = { 0 };
switch (port_event) {
case HCD_PORT_EVENT_NONE:
// Nothing to do
break;
case HCD_PORT_EVENT_CONNECTION: {
if (hcd_port_command(root_port_hdl, HCD_PORT_CMD_RESET) != ESP_OK) {
ESP_LOGE(HUB_DRIVER_TAG, "Root port reset failed");
goto reset_err;
}
ESP_LOGD(HUB_DRIVER_TAG, "Root port reset");
usb_speed_t speed;
if (hcd_port_get_speed(p_hub_driver_obj->constant.root_port_hdl, &speed) != ESP_OK) {
goto new_dev_err;
}
// Allocate a new device. We use a fixed HUB_ROOT_DEV_UID for now since we only support a single device
usbh_dev_params_t params = {
.uid = HUB_ROOT_DEV_UID,
.speed = speed,
.root_port_hdl = p_hub_driver_obj->constant.root_port_hdl,
};
if (usbh_devs_add(&params) != ESP_OK) {
ESP_LOGE(HUB_DRIVER_TAG, "Failed to add device");
goto new_dev_err;
}
// Save uid to Port
p_hub_driver_obj->single_thread.root_dev_uid = HUB_ROOT_DEV_UID;
// Change Port state
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_ENABLED;
HUB_DRIVER_EXIT_CRITICAL();
event_data.event = HUB_EVENT_CONNECTED;
event_data.connected.uid = p_hub_driver_obj->single_thread.root_dev_uid;
p_hub_driver_obj->constant.event_cb(&event_data, p_hub_driver_obj->constant.event_cb_arg);
break;
new_dev_err:
// We allow this to fail in case a disconnect/port error happens while disabling.
hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_DISABLE);
reset_err:
break;
}
case HCD_PORT_EVENT_DISCONNECTION:
case HCD_PORT_EVENT_ERROR:
case HCD_PORT_EVENT_OVERCURRENT: {
bool port_has_device = false;
HUB_DRIVER_ENTER_CRITICAL();
switch (p_hub_driver_obj->dynamic.root_port_state) {
case ROOT_PORT_STATE_POWERED: // This occurred before enumeration
case ROOT_PORT_STATE_DISABLED: // This occurred after the device has already been disabled
// Therefore, there's no device object to clean up, and we can go straight to port recovery
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_RECOVER;
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_FLAG_ACTION_PORT_REQ;
break;
case ROOT_PORT_STATE_ENABLED:
// There is an enabled (active) device. We need to indicate to USBH that the device is gone
port_has_device = true;
break;
default:
abort(); // Should never occur
break;
}
HUB_DRIVER_EXIT_CRITICAL();
if (port_has_device) {
// The port must have a device object
assert(p_hub_driver_obj->single_thread.root_dev_uid != 0);
event_data.event = HUB_EVENT_DISCONNECTED;
event_data.disconnected.uid = p_hub_driver_obj->single_thread.root_dev_uid;
p_hub_driver_obj->constant.event_cb(&event_data, p_hub_driver_obj->constant.event_cb_arg);
}
break;
}
default:
abort(); // Should never occur
break;
}
}
static void root_port_req(hcd_port_handle_t root_port_hdl)
{
unsigned int port_reqs;
HUB_DRIVER_ENTER_CRITICAL();
port_reqs = p_hub_driver_obj->dynamic.port_reqs;
p_hub_driver_obj->dynamic.port_reqs = 0;
HUB_DRIVER_EXIT_CRITICAL();
if (port_reqs & PORT_REQ_DISABLE) {
ESP_LOGD(HUB_DRIVER_TAG, "Disabling root port");
// We allow this to fail in case a disconnect/port error happens while disabling.
hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_DISABLE);
}
if (port_reqs & PORT_REQ_RECOVER) {
ESP_LOGD(HUB_DRIVER_TAG, "Recovering root port");
ESP_ERROR_CHECK(hcd_port_recover(p_hub_driver_obj->constant.root_port_hdl));
ESP_ERROR_CHECK(hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_POWER_ON));
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_POWERED;
HUB_DRIVER_EXIT_CRITICAL();
}
}
static esp_err_t root_port_recycle(void)
{
// Device is free, we can now request its port be recycled
hcd_port_state_t port_state = hcd_port_get_state(p_hub_driver_obj->constant.root_port_hdl);
HUB_DRIVER_ENTER_CRITICAL();
// How the port is recycled will depend on the port's state
switch (port_state) {
case HCD_PORT_STATE_ENABLED:
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_DISABLE;
break;
case HCD_PORT_STATE_RECOVERY:
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_RECOVER;
break;
default:
abort(); // Should never occur
break;
}
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_FLAG_ACTION_PORT_REQ;
HUB_DRIVER_EXIT_CRITICAL();
p_hub_driver_obj->constant.proc_req_cb(USB_PROC_REQ_SOURCE_HUB, false, p_hub_driver_obj->constant.proc_req_cb_arg);
return ESP_OK;
}
// ---------------------------------------------- Hub Driver Functions -------------------------------------------------
esp_err_t hub_install(hub_config_t *hub_config, void **client_ret)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj == NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret;
// Allocate Hub driver object
hub_driver_t *hub_driver_obj = heap_caps_calloc(1, sizeof(hub_driver_t), MALLOC_CAP_DEFAULT);
if (hub_driver_obj == NULL) {
return ESP_ERR_NO_MEM;
}
*client_ret = NULL;
// Install HCD port
hcd_port_config_t port_config = {
.fifo_bias = HUB_ROOT_HCD_PORT_FIFO_BIAS,
.callback = root_port_callback,
.callback_arg = NULL,
.context = NULL,
};
hcd_port_handle_t root_port_hdl;
ret = hcd_port_init(HUB_ROOT_PORT_NUM, &port_config, &root_port_hdl);
if (ret != ESP_OK) {
goto err;
}
// Initialize Hub driver object
hub_driver_obj->constant.root_port_hdl = root_port_hdl;
hub_driver_obj->constant.proc_req_cb = hub_config->proc_req_cb;
hub_driver_obj->constant.proc_req_cb_arg = hub_config->proc_req_cb_arg;
hub_driver_obj->constant.event_cb = hub_config->event_cb;
hub_driver_obj->constant.event_cb_arg = hub_config->event_cb_arg;
HUB_DRIVER_ENTER_CRITICAL();
hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_NOT_POWERED;
if (p_hub_driver_obj != NULL) {
HUB_DRIVER_EXIT_CRITICAL();
ret = ESP_ERR_INVALID_STATE;
goto assign_err;
}
p_hub_driver_obj = hub_driver_obj;
HUB_DRIVER_EXIT_CRITICAL();
return ret;
assign_err:
ESP_ERROR_CHECK(hcd_port_deinit(root_port_hdl));
err:
heap_caps_free(hub_driver_obj);
return ret;
}
esp_err_t hub_uninstall(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj->dynamic.root_port_state == ROOT_PORT_STATE_NOT_POWERED, ESP_ERR_INVALID_STATE);
hub_driver_t *hub_driver_obj = p_hub_driver_obj;
p_hub_driver_obj = NULL;
HUB_DRIVER_EXIT_CRITICAL();
ESP_ERROR_CHECK(hcd_port_deinit(hub_driver_obj->constant.root_port_hdl));
// Free Hub driver resources
heap_caps_free(hub_driver_obj);
return ESP_OK;
}
esp_err_t hub_root_start(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj->dynamic.root_port_state == ROOT_PORT_STATE_NOT_POWERED, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
// Power ON the root port
esp_err_t ret;
ret = hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_POWER_ON);
if (ret == ESP_OK) {
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_POWERED;
HUB_DRIVER_EXIT_CRITICAL();
}
return ret;
}
esp_err_t hub_root_stop(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj->dynamic.root_port_state != ROOT_PORT_STATE_NOT_POWERED, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret;
ret = hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_POWER_OFF);
if (ret == ESP_OK) {
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_NOT_POWERED;
HUB_DRIVER_EXIT_CRITICAL();
}
return ret;
}
esp_err_t hub_port_recycle(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num, unsigned int dev_uid)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret = ESP_FAIL;
if (parent_port_num == 0) {
if (p_hub_driver_obj->single_thread.root_dev_uid) {
// If root port has a device, it should be with correct uid
assert(dev_uid == p_hub_driver_obj->single_thread.root_dev_uid);
p_hub_driver_obj->single_thread.root_dev_uid = 0;
}
ret = root_port_recycle();
} else {
ESP_LOGW(HUB_DRIVER_TAG, "Recycling External Port has not been implemented yet");
return ESP_ERR_NOT_SUPPORTED;
}
return ret;
}
esp_err_t hub_port_reset(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret = ESP_FAIL;
if (parent_port_num == 0) {
// The port must have a device object
assert(p_hub_driver_obj->single_thread.root_dev_uid != 0);
ret = hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_RESET);
if (ret != ESP_OK) {
ESP_LOGE(HUB_DRIVER_TAG, "Failed to issue root port reset");
}
hub_event_data_t event_data = {
.event = HUB_EVENT_RESET_COMPLETED,
.disconnected = {
.uid = p_hub_driver_obj->single_thread.root_dev_uid,
},
};
p_hub_driver_obj->constant.event_cb(&event_data, p_hub_driver_obj->constant.event_cb_arg);
} else {
ESP_LOGW(HUB_DRIVER_TAG, "Reset External Port has not been implemented yet");
return ESP_ERR_NOT_SUPPORTED;
}
return ret;
}
esp_err_t hub_process(void)
{
HUB_DRIVER_ENTER_CRITICAL();
uint32_t action_flags = p_hub_driver_obj->dynamic.flags.actions;
p_hub_driver_obj->dynamic.flags.actions = 0;
HUB_DRIVER_EXIT_CRITICAL();
while (action_flags) {
if (action_flags & HUB_DRIVER_FLAG_ACTION_ROOT_EVENT) {
root_port_handle_events(p_hub_driver_obj->constant.root_port_hdl);
}
if (action_flags & HUB_DRIVER_FLAG_ACTION_PORT_REQ) {
root_port_req(p_hub_driver_obj->constant.root_port_hdl);
}
HUB_DRIVER_ENTER_CRITICAL();
action_flags = p_hub_driver_obj->dynamic.flags.actions;
p_hub_driver_obj->dynamic.flags.actions = 0;
HUB_DRIVER_EXIT_CRITICAL();
}
return ESP_OK;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik