/* * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ /** * ESP32-S3 Linker Script Memory Layout * This file describes the memory layout (memory blocks) by virtual memory addresses. * This linker script is passed through the C preprocessor to include configuration options. * Please use preprocessor features sparingly! * Restrict to simple macros with numeric values, and/or #if/#endif blocks. */ #include "sdkconfig.h" #include "ld.common" /* * 40370000 <- IRAM/Icache -> 40378000 <- D/IRAM (I) -> 403E0000 * 3FC88000 <- D/IRAM (D) -> 3FCF0000 <- DRAM/DCache -> 3FD00000 * * Startup code uses the IRAM from 0x403B9000 to 0x403E0000, which is not available for static * memory, but can only be used after app starts. * * D cache use the memory from high address, so when it's configured to 16K/32K, the region * 0x3FCF000 ~ (3FD00000 - DATA_CACHE_SIZE) should be available. This region is not used as * static memory, leaving to the heap. */ #define SRAM_IRAM_START 0x40370000 #define SRAM_DIRAM_I_START 0x40378000 #define SRAM_IRAM_END 0x403CC700 /* Please refer to ESP32-S3 bootloader.ld for more information on this */ #define I_D_SRAM_OFFSET (SRAM_DIRAM_I_START - SRAM_DRAM_START) #define SRAM_DRAM_START 0x3FC88000 #define SRAM_DRAM_END (SRAM_IRAM_END - I_D_SRAM_OFFSET) /* 2nd stage bootloader iram_loader_seg start address */ #define I_D_SRAM_SIZE (SRAM_DRAM_END - SRAM_DRAM_START) #define ICACHE_SIZE 0x8000 #define SRAM_IRAM_ORG (SRAM_IRAM_START + CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE) #define SRAM_IRAM_SIZE (I_D_SRAM_SIZE + ICACHE_SIZE - CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE) #define DCACHE_SIZE 0x10000 #define SRAM_DRAM_ORG (SRAM_DRAM_START) #if CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE ASSERT((CONFIG_ESP32S3_FIXED_STATIC_RAM_SIZE <= I_D_SRAM_SIZE), "Fixed static ram data does not fit.") #define DRAM0_0_SEG_LEN CONFIG_ESP32S3_FIXED_STATIC_RAM_SIZE #else #define DRAM0_0_SEG_LEN I_D_SRAM_SIZE #endif // CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE MEMORY { /** * All these values assume the flash cache is on, and have the blocks this uses subtracted from the length * of the various regions. The 'data access port' dram/drom regions map to the same iram/irom regions but * are connected to the data port of the CPU and eg allow byte-wise access. */ /* IRAM for PRO CPU. */ iram0_0_seg (RX) : org = SRAM_IRAM_ORG, len = SRAM_IRAM_SIZE #if CONFIG_APP_BUILD_USE_FLASH_SECTIONS /* Flash mapped instruction data */ iram0_2_seg (RX) : org = 0x42000020, len = 0x800000-0x20 /** * (0x20 offset above is a convenience for the app binary image generation. * Flash cache has 64KB pages. The .bin file which is flashed to the chip * has a 0x18 byte file header, and each segment has a 0x08 byte segment * header. Setting this offset makes it simple to meet the flash cache MMU's * constraint that (paddr % 64KB == vaddr % 64KB).) */ #endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS /** * Shared data RAM, excluding memory reserved for ROM bss/data/stack. * Enabling Bluetooth & Trace Memory features in menuconfig will decrease the amount of RAM available. */ dram0_0_seg (RW) : org = SRAM_DRAM_ORG, len = DRAM0_0_SEG_LEN #if CONFIG_APP_BUILD_USE_FLASH_SECTIONS /* Flash mapped constant data */ drom0_0_seg (R) : org = 0x3C000020, len = 0x2000000-0x20 /* (See iram0_2_seg for meaning of 0x20 offset in the above.) */ #endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS /** * RTC fast memory (executable). Persists over deep sleep. */ rtc_iram_seg(RWX) : org = 0x600fe000, len = 0x2000 - RESERVE_RTC_MEM /* We reduced the size of rtc_iram_seg by RESERVE_RTC_MEM value. It reserves the amount of RTC fast memory that we use for this memory segment. This segment is intended for keeping: - (lower addr) rtc timer data (s_rtc_timer_retain_mem, see esp_clk.c files). - (higher addr) bootloader rtc data (s_bootloader_retain_mem, when a Kconfig option is on). The aim of this is to keep data that will not be moved around and have a fixed address. */ rtc_reserved_seg(RW) : org = 0x600fe000 + 0x2000 - RESERVE_RTC_MEM, len = RESERVE_RTC_MEM /** * RTC slow memory (data accessible). Persists over deep sleep. * Start of RTC slow memory is reserved for ULP co-processor code + data, if enabled. */ #if CONFIG_ULP_COPROC_ENABLED rtc_slow_seg(RW) : org = 0x50000000 + CONFIG_ULP_COPROC_RESERVE_MEM, len = 0x2000 - CONFIG_ULP_COPROC_RESERVE_MEM #else rtc_slow_seg(RW) : org = 0x50000000 , len = 0x2000 #endif // CONFIG_ULP_COPROC_ENABLED /** * `extern_ram_seg` and `drom0_0_seg` share the same bus and the address region. * A dummy section is used to avoid overlap. See `.ext_ram.dummy` in `sections.ld.in` */ extern_ram_seg(RWX) : org = 0x3c000020 , len = 0x2000000-0x20 } #if CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE /* static data ends at defined address */ _heap_start = SRAM_DRAM_ORG + DRAM0_0_SEG_LEN; #else _heap_start = _heap_low_start; #endif // CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE /* Heap ends at top of dram0_0_seg */ _heap_end = 0x40000000; _data_seg_org = ORIGIN(rtc_data_seg); /* RTC fast memory shares the same range for both data and instructions */ REGION_ALIAS("rtc_data_seg", rtc_iram_seg ); #if CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM REGION_ALIAS("rtc_data_location", rtc_data_seg ); #else REGION_ALIAS("rtc_data_location", rtc_slow_seg ); #endif // CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM #if CONFIG_APP_BUILD_USE_FLASH_SECTIONS REGION_ALIAS("default_code_seg", iram0_2_seg); #else REGION_ALIAS("default_code_seg", iram0_0_seg); #endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS #if CONFIG_APP_BUILD_USE_FLASH_SECTIONS REGION_ALIAS("default_rodata_seg", drom0_0_seg); #else REGION_ALIAS("default_rodata_seg", dram0_0_seg); #endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS /** * If rodata default segment is placed in `drom0_0_seg`, then flash's first rodata section must * also be first in the segment. */ #if CONFIG_APP_BUILD_USE_FLASH_SECTIONS ASSERT(_flash_rodata_dummy_start == ORIGIN(default_rodata_seg), ".flash_rodata_dummy section must be placed at the beginning of the rodata segment.") #endif