menu "Wi-Fi" # TODO: Disable WIFI support on ESP32-H2 (WIFI-5796) # visible if SOC_WIFI_SUPPORTED config ESP_WIFI_ENABLED bool default y if SOC_WIFI_SUPPORTED config ESP_WIFI_STATIC_RX_BUFFER_NUM int "Max number of WiFi static RX buffers" range 2 25 if !SOC_WIFI_HE_SUPPORT range 2 128 if SOC_WIFI_HE_SUPPORT default 10 if !SPIRAM_TRY_ALLOCATE_WIFI_LWIP default 16 if SPIRAM_TRY_ALLOCATE_WIFI_LWIP help Set the number of WiFi static RX buffers. Each buffer takes approximately 1.6KB of RAM. The static rx buffers are allocated when esp_wifi_init is called, they are not freed until esp_wifi_deinit is called. WiFi hardware use these buffers to receive all 802.11 frames. A higher number may allow higher throughput but increases memory use. If ESP_WIFI_AMPDU_RX_ENABLED is enabled, this value is recommended to set equal or bigger than ESP_WIFI_RX_BA_WIN in order to achieve better throughput and compatibility with both stations and APs. config ESP_WIFI_DYNAMIC_RX_BUFFER_NUM int "Max number of WiFi dynamic RX buffers" range 0 128 if !LWIP_WND_SCALE range 0 1024 if LWIP_WND_SCALE default 32 help Set the number of WiFi dynamic RX buffers, 0 means unlimited RX buffers will be allocated (provided sufficient free RAM). The size of each dynamic RX buffer depends on the size of the received data frame. For each received data frame, the WiFi driver makes a copy to an RX buffer and then delivers it to the high layer TCP/IP stack. The dynamic RX buffer is freed after the higher layer has successfully received the data frame. For some applications, WiFi data frames may be received faster than the application can process them. In these cases we may run out of memory if RX buffer number is unlimited (0). If a dynamic RX buffer limit is set, it should be at least the number of static RX buffers. choice ESP_WIFI_TX_BUFFER prompt "Type of WiFi TX buffers" default ESP_WIFI_DYNAMIC_TX_BUFFER help Select type of WiFi TX buffers: If "Static" is selected, WiFi TX buffers are allocated when WiFi is initialized and released when WiFi is de-initialized. The size of each static TX buffer is fixed to about 1.6KB. If "Dynamic" is selected, each WiFi TX buffer is allocated as needed when a data frame is delivered to the Wifi driver from the TCP/IP stack. The buffer is freed after the data frame has been sent by the WiFi driver. The size of each dynamic TX buffer depends on the length of each data frame sent by the TCP/IP layer. If PSRAM is enabled, "Static" should be selected to guarantee enough WiFi TX buffers. If PSRAM is disabled, "Dynamic" should be selected to improve the utilization of RAM. config ESP_WIFI_STATIC_TX_BUFFER bool "Static" config ESP_WIFI_DYNAMIC_TX_BUFFER bool "Dynamic" depends on !SPIRAM_USE_MALLOC endchoice config ESP_WIFI_TX_BUFFER_TYPE int default 0 if ESP_WIFI_STATIC_TX_BUFFER default 1 if ESP_WIFI_DYNAMIC_TX_BUFFER config ESP_WIFI_STATIC_TX_BUFFER_NUM int "Max number of WiFi static TX buffers" depends on ESP_WIFI_STATIC_TX_BUFFER range 1 64 default 16 help Set the number of WiFi static TX buffers. Each buffer takes approximately 1.6KB of RAM. The static RX buffers are allocated when esp_wifi_init() is called, they are not released until esp_wifi_deinit() is called. For each transmitted data frame from the higher layer TCP/IP stack, the WiFi driver makes a copy of it in a TX buffer. For some applications especially UDP applications, the upper layer can deliver frames faster than WiFi layer can transmit. In these cases, we may run out of TX buffers. config ESP_WIFI_CACHE_TX_BUFFER_NUM int "Max number of WiFi cache TX buffers" depends on SPIRAM range 16 128 default 32 help Set the number of WiFi cache TX buffer number. For each TX packet from uplayer, such as LWIP etc, WiFi driver needs to allocate a static TX buffer and makes a copy of uplayer packet. If WiFi driver fails to allocate the static TX buffer, it caches the uplayer packets to a dedicated buffer queue, this option is used to configure the size of the cached TX queue. config ESP_WIFI_DYNAMIC_TX_BUFFER_NUM int "Max number of WiFi dynamic TX buffers" depends on ESP_WIFI_DYNAMIC_TX_BUFFER range 1 128 default 32 help Set the number of WiFi dynamic TX buffers. The size of each dynamic TX buffer is not fixed, it depends on the size of each transmitted data frame. For each transmitted frame from the higher layer TCP/IP stack, the WiFi driver makes a copy of it in a TX buffer. For some applications, especially UDP applications, the upper layer can deliver frames faster than WiFi layer can transmit. In these cases, we may run out of TX buffers. config ESP_WIFI_CSI_ENABLED bool "WiFi CSI(Channel State Information)" depends on SOC_WIFI_CSI_SUPPORT default n help Select this option to enable CSI(Channel State Information) feature. CSI takes about CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM KB of RAM. If CSI is not used, it is better to disable this feature in order to save memory. config ESP_WIFI_AMPDU_TX_ENABLED bool "WiFi AMPDU TX" default y help Select this option to enable AMPDU TX feature config ESP_WIFI_TX_BA_WIN int "WiFi AMPDU TX BA window size" depends on ESP_WIFI_AMPDU_TX_ENABLED range 2 32 if !SOC_WIFI_HE_SUPPORT range 2 64 if SOC_WIFI_HE_SUPPORT default 6 help Set the size of WiFi Block Ack TX window. Generally a bigger value means higher throughput but more memory. Most of time we should NOT change the default value unless special reason, e.g. test the maximum UDP TX throughput with iperf etc. For iperf test in shieldbox, the recommended value is 9~12. config ESP_WIFI_AMPDU_RX_ENABLED bool "WiFi AMPDU RX" default y help Select this option to enable AMPDU RX feature config ESP_WIFI_RX_BA_WIN int "WiFi AMPDU RX BA window size" depends on ESP_WIFI_AMPDU_RX_ENABLED range 2 32 if !SOC_WIFI_HE_SUPPORT range 2 64 if SOC_WIFI_HE_SUPPORT default 6 if !SPIRAM_TRY_ALLOCATE_WIFI_LWIP default 16 if SPIRAM_TRY_ALLOCATE_WIFI_LWIP help Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput and better compatibility but more memory. Most of time we should NOT change the default value unless special reason, e.g. test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the recommended value is 9~12. If PSRAM is used and WiFi memory is prefered to allocat in PSRAM first, the default and minimum value should be 16 to achieve better throughput and compatibility with both stations and APs. config ESP_WIFI_AMSDU_TX_ENABLED bool "WiFi AMSDU TX" depends on SPIRAM default n help Select this option to enable AMSDU TX feature config ESP_WIFI_NVS_ENABLED bool "WiFi NVS flash" default y help Select this option to enable WiFi NVS flash choice ESP_WIFI_TASK_CORE_ID depends on !FREERTOS_UNICORE prompt "WiFi Task Core ID" default ESP_WIFI_TASK_PINNED_TO_CORE_0 help Pinned WiFi task to core 0 or core 1. config ESP_WIFI_TASK_PINNED_TO_CORE_0 bool "Core 0" config ESP_WIFI_TASK_PINNED_TO_CORE_1 bool "Core 1" endchoice config ESP_WIFI_SOFTAP_BEACON_MAX_LEN int "Max length of WiFi SoftAP Beacon" range 752 1256 default 752 help ESP-MESH utilizes beacon frames to detect and resolve root node conflicts (see documentation). However the default length of a beacon frame can simultaneously hold only five root node identifier structures, meaning that a root node conflict of up to five nodes can be detected at one time. In the occurence of more root nodes conflict involving more than five root nodes, the conflict resolution process will detect five of the root nodes, resolve the conflict, and re-detect more root nodes. This process will repeat until all root node conflicts are resolved. However this process can generally take a very long time. To counter this situation, the beacon frame length can be increased such that more root nodes can be detected simultaneously. Each additional root node will require 36 bytes and should be added ontop of the default beacon frame length of 752 bytes. For example, if you want to detect 10 root nodes simultaneously, you need to set the beacon frame length as 932 (752+36*5). Setting a longer beacon length also assists with debugging as the conflicting root nodes can be identified more quickly. config ESP_WIFI_MGMT_SBUF_NUM int "WiFi mgmt short buffer number" range 6 32 default 32 help Set the number of WiFi management short buffer. config ESP_WIFI_IRAM_OPT bool "WiFi IRAM speed optimization" default n if (BT_ENABLED && SPIRAM && IDF_TARGET_ESP32) default y help Select this option to place frequently called Wi-Fi library functions in IRAM. When this option is disabled, more than 10Kbytes of IRAM memory will be saved but Wi-Fi throughput will be reduced. config ESP_WIFI_RX_IRAM_OPT bool "WiFi RX IRAM speed optimization" default n if (BT_ENABLED && SPIRAM && IDF_TARGET_ESP32) default y help Select this option to place frequently called Wi-Fi library RX functions in IRAM. When this option is disabled, more than 17Kbytes of IRAM memory will be saved but Wi-Fi performance will be reduced. config ESP_WIFI_ENABLE_WPA3_SAE bool "Enable WPA3-Personal" default y depends on ESP_WIFI_MBEDTLS_CRYPTO help Select this option to allow the device to establish a WPA3-Personal connection with eligible AP's. PMF (Protected Management Frames) is a prerequisite feature for a WPA3 connection, it needs to be explicitly configured before attempting connection. Please refer to the Wi-Fi Driver API Guide for details. config ESP_WIFI_ENABLE_SAE_PK bool "Enable SAE-PK" default y depends on ESP_WIFI_ENABLE_WPA3_SAE help Select this option to enable SAE-PK config ESP_WIFI_SOFTAP_SAE_SUPPORT bool "Enable WPA3 Personal(SAE) SoftAP" default y depends on ESP_WIFI_ENABLE_WPA3_SAE depends on ESP_WIFI_SOFTAP_SUPPORT help Select this option to enable SAE support in softAP mode. config ESP_WIFI_ENABLE_WPA3_OWE_STA bool "Enable OWE STA" default y select ESP_WIFI_MBEDTLS_CRYPTO help Select this option to allow the device to establish OWE connection with eligible AP's. PMF (Protected Management Frames) is a prerequisite feature for a WPA3 connection, it needs to be explicitly configured before attempting connection. Please refer to the Wi-Fi Driver API Guide for details. config ESP_WIFI_SLP_IRAM_OPT bool "WiFi SLP IRAM speed optimization" select PM_SLP_DEFAULT_PARAMS_OPT select PERIPH_CTRL_FUNC_IN_IRAM help Select this option to place called Wi-Fi library TBTT process and receive beacon functions in IRAM. Some functions can be put in IRAM either by ESP_WIFI_IRAM_OPT and ESP_WIFI_RX_IRAM_OPT, or this one. If already enabled ESP_WIFI_IRAM_OPT, the other 7.3KB IRAM memory would be taken by this option. If already enabled ESP_WIFI_RX_IRAM_OPT, the other 1.3KB IRAM memory would be taken by this option. If neither of them are enabled, the other 7.4KB IRAM memory would be taken by this option. Wi-Fi power-save mode average current would be reduced if this option is enabled. config ESP_WIFI_SLP_DEFAULT_MIN_ACTIVE_TIME int "Minimum active time" range 8 60 default 50 depends on ESP_WIFI_SLP_IRAM_OPT help The minimum timeout for waiting to receive data, unit: milliseconds. config ESP_WIFI_SLP_DEFAULT_MAX_ACTIVE_TIME int "Maximum keep alive time" range 10 60 default 10 depends on ESP_WIFI_SLP_IRAM_OPT help The maximum time that wifi keep alive, unit: seconds. config ESP_WIFI_FTM_ENABLE bool "WiFi FTM" default n depends on SOC_WIFI_FTM_SUPPORT help Enable feature Fine Timing Measurement for calculating WiFi Round-Trip-Time (RTT). config ESP_WIFI_FTM_INITIATOR_SUPPORT bool "FTM Initiator support" default y depends on ESP_WIFI_FTM_ENABLE config ESP_WIFI_FTM_RESPONDER_SUPPORT bool "FTM Responder support" default y depends on ESP_WIFI_FTM_ENABLE config ESP_WIFI_STA_DISCONNECTED_PM_ENABLE bool "Power Management for station at disconnected" default y help Select this option to enable power_management for station when disconnected. Chip will do modem-sleep when rf module is not in use any more. config ESP_WIFI_GCMP_SUPPORT bool "WiFi GCMP Support(GCMP128 and GCMP256)" default n depends on SOC_WIFI_GCMP_SUPPORT help Select this option to enable GCMP support. GCMP support is compulsory for WiFi Suite-B support. config ESP_WIFI_GMAC_SUPPORT bool "WiFi GMAC Support(GMAC128 and GMAC256)" default n help Select this option to enable GMAC support. GMAC support is compulsory for WiFi 192 bit certification. config ESP_WIFI_SOFTAP_SUPPORT bool "WiFi SoftAP Support" default y help WiFi module can be compiled without SoftAP to save code size. config ESP_WIFI_ENHANCED_LIGHT_SLEEP bool "WiFi modem automatically receives the beacon" default n depends on ESP_PHY_MAC_BB_PD && SOC_PM_SUPPORT_BEACON_WAKEUP help The wifi modem automatically receives the beacon frame during light sleep. config ESP_WIFI_SLP_BEACON_LOST_OPT bool "Wifi sleep optimize when beacon lost" help Enable wifi sleep optimization when beacon loss occurs and immediately enter sleep mode when the WiFi module detects beacon loss. config ESP_WIFI_SLP_BEACON_LOST_TIMEOUT int "Beacon loss timeout" range 5 100 default 10 depends on ESP_WIFI_SLP_BEACON_LOST_OPT help Timeout time for close rf phy when beacon loss occurs, Unit: 1024 microsecond. config ESP_WIFI_SLP_BEACON_LOST_THRESHOLD int "Maximum number of consecutive lost beacons allowed" range 0 8 default 3 depends on ESP_WIFI_SLP_BEACON_LOST_OPT help Maximum number of consecutive lost beacons allowed, WiFi keeps Rx state when the number of consecutive beacons lost is greater than the given threshold. config ESP_WIFI_SLP_PHY_ON_DELTA_EARLY_TIME int "Delta early time for RF PHY on" range 0 100 default 2 depends on ESP_WIFI_SLP_BEACON_LOST_OPT && SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW help Delta early time for rf phy on, When the beacon is lost, the next rf phy on will be earlier the time specified by the configuration item, Unit: 32 microsecond. config ESP_WIFI_SLP_PHY_OFF_DELTA_TIMEOUT_TIME int "Delta timeout time for RF PHY off" range 0 8 default 2 depends on ESP_WIFI_SLP_BEACON_LOST_OPT && SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW help Delta timeout time for rf phy off, When the beacon is lost, the next rf phy off will be delayed for the time specified by the configuration item. Unit: 1024 microsecond. config ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM int "Maximum espnow encrypt peers number" range 0 4 if IDF_TARGET_ESP32C2 range 0 17 if (!IDF_TARGET_ESP32C2) default 2 if IDF_TARGET_ESP32C2 default 7 if (!IDF_TARGET_ESP32C2) help Maximum number of encrypted peers supported by espnow. The number of hardware keys for encryption is fixed. And the espnow and SoftAP share the same hardware keys. So this configuration will affect the maximum connection number of SoftAP. Maximum espnow encrypted peers number + maximum number of connections of SoftAP = Max hardware keys number. When using ESP mesh, this value should be set to a maximum of 6. config ESP_WIFI_NAN_ENABLE bool "WiFi Aware" default n depends on SOC_WIFI_NAN_SUPPORT help Enable WiFi Aware (NAN) feature. config ESP_WIFI_ENABLE_WIFI_TX_STATS bool "Enable Wi-Fi transmission statistics" depends on SOC_WIFI_HE_SUPPORT default "y" help Enable Wi-Fi transmission statistics. Total support 4 access category. Each access category will use 346 bytes memory. config ESP_WIFI_MBEDTLS_CRYPTO bool "Use MbedTLS crypto APIs" default y select MBEDTLS_AES_C select MBEDTLS_ECP_C select MBEDTLS_ECDH_C select MBEDTLS_ECDSA_C select MBEDTLS_TLS_ENABLED help Select this option to use MbedTLS crypto APIs which utilize hardware acceleration. if ESP_WIFI_MBEDTLS_CRYPTO config ESP_WIFI_MBEDTLS_TLS_CLIENT bool "Use MbedTLS TLS client for WiFi Enterprise connection" default y select MBEDTLS_TLS_ENABLED help Select this option to use MbedTLS TLS client for WPA2 enterprise connection. Please note that from MbedTLS-3.0 onwards, MbedTLS does not support SSL-3.0 TLS-v1.0, TLS-v1.1 versions. Incase your server is using one of these version, it is advisable to update your server. Please disable this option for compatibilty with older TLS versions. endif config ESP_WIFI_WAPI_PSK bool "Enable WAPI PSK support" depends on SOC_WIFI_WAPI_SUPPORT default n help Select this option to enable WAPI-PSK which is a Chinese National Standard Encryption for Wireless LANs (GB 15629.11-2003). config ESP_WIFI_SUITE_B_192 bool "Enable NSA suite B support with 192 bit key" default n select ESP_WIFI_GCMP_SUPPORT select ESP_WIFI_GMAC_SUPPORT help Select this option to enable 192 bit NSA suite-B. This is necessary to support WPA3 192 bit security. config ESP_WIFI_11KV_SUPPORT bool "Enable 802.11k, 802.11v APIs Support" default n help Select this option to enable 802.11k 802.11v APIs(RRM and BTM support). Only APIs which are helpful for network assisted roaming are supported for now. Enable this option with BTM and RRM enabled in sta config to make device ready for network assisted roaming. BTM: BSS transition management enables an AP to request a station to transition to a specific AP, or to indicate to a station a set of preferred APs. RRM: Radio measurements enable STAs to understand the radio environment, it enables STAs to observe and gather data on radio link performance and on the radio environment. Current implementation adds beacon report, link measurement, neighbor report. config ESP_WIFI_SCAN_CACHE bool "Keep scan results in cache" depends on ESP_WIFI_11KV_SUPPORT default n help Keep scan results in cache, if not enabled, those will be flushed immediately. config ESP_WIFI_MBO_SUPPORT bool "Enable Multi Band Operation Certification Support" default n select ESP_WIFI_11KV_SUPPORT select ESP_WIFI_SCAN_CACHE help Select this option to enable WiFi Multiband operation certification support. config ESP_WIFI_DPP_SUPPORT bool "Enable DPP support" default n select ESP_WIFI_MBEDTLS_CRYPTO help Select this option to enable WiFi Easy Connect Support. config ESP_WIFI_11R_SUPPORT bool "Enable 802.11R (Fast Transition) Support" default n help Select this option to enable WiFi Fast Transition Support. config ESP_WIFI_WPS_SOFTAP_REGISTRAR bool "Add WPS Registrar support in SoftAP mode" depends on ESP_WIFI_SOFTAP_SUPPORT default n help Select this option to enable WPS registrar support in softAP mode. config ESP_WIFI_ENABLE_WIFI_RX_STATS bool "Enable Wi-Fi reception statistics" depends on SOC_WIFI_HE_SUPPORT default "y" help Enable Wi-Fi reception statistics. Total support 2 access category. Each access category will use 190 bytes memory. config ESP_WIFI_ENABLE_WIFI_RX_MU_STATS bool "Enable Wi-Fi DL MU-MIMO and DL OFDMA reception statistics" depends on ESP_WIFI_ENABLE_WIFI_RX_STATS default "y" help Enable Wi-Fi DL MU-MIMO and DL OFDMA reception statistics. Will use 10932 bytes memory. menu "WPS Configuration Options" config ESP_WIFI_WPS_STRICT bool "Strictly validate all WPS attributes" default n help Select this option to enable validate each WPS attribute rigorously. Disabling this add the workaorunds with various APs. Enabling this may cause inter operability issues with some APs. config ESP_WIFI_WPS_PASSPHRASE bool "Get WPA2 passphrase in WPS config" default n help Select this option to get passphrase during WPS configuration. This option fakes the virtual display capabilites to get the configuration in passphrase mode. Not recommanded to be used since WPS credentials should not be shared to other devices, making it in readable format increases that risk, also passphrase requires pbkdf2 to convert in psk. endmenu # "WPS Configuration Options" config ESP_WIFI_DEBUG_PRINT bool "Print debug messages from WPA Supplicant" default n help Select this option to print logging information from WPA supplicant, this includes handshake information and key hex dumps depending on the project logging level. Enabling this could increase the build size ~60kb depending on the project logging level. config ESP_WIFI_TESTING_OPTIONS bool "Add DPP testing code" default n help Select this to enable unity test for DPP. endmenu # Wi-Fi