| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |

# Simple HTTPD Server Example

The Example consists of HTTPD server demo with demostration of URI handling :
    1. URI \hello for GET command returns "Hello World!" message
    2. URI \echo for POST command echoes back the POSTed message

## How to use example

### Hardware Required

* A development board with ESP32/ESP32-S2/ESP32-C3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
* A USB cable for power supply and programming

### Configure the project

```
idf.py menuconfig
```
* Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.

### Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

```
idf.py -p PORT flash monitor
```

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type ``Ctrl-]``.)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

### Test the example :
        * run the test script : "python scripts/client.py \<IP\> \<port\> \<MSG\>"
            * the provided test script first does a GET \hello and displays the response
            * the script does a POST to \echo with the user input \<MSG\> and displays the response
        * or use curl (asssuming IP is 192.168.43.130):
            1. "curl 192.168.43.130:80/hello"  - tests the GET "\hello" handler
            2. "curl -X POST --data-binary @anyfile 192.168.43.130:80/echo > tmpfile"
                * "anyfile" is the file being sent as request body and "tmpfile" is where the body of the response is saved
                * since the server echoes back the request body, the two files should be same, as can be confirmed using : "cmp anyfile tmpfile"
            3. "curl -X PUT -d "0" 192.168.43.130:80/ctrl" - disable /hello and /echo handlers
            4. "curl -X PUT -d "1" 192.168.43.130:80/ctrl" -  enable /hello and /echo handlers

## Example Output
```
I (9580) example_connect: - IPv4 address: 192.168.194.219
I (9580) example_connect: - IPv6 address: fe80:0000:0000:0000:266f:28ff:fe80:2c74, type: ESP_IP6_ADDR_IS_LINK_LOCAL
I (9590) example: Starting server on port: '80'
I (9600) example: Registering URI handlers
I (66450) example: Found header => Host: 192.168.194.219
I (66460) example: Request headers lost
```

## Troubleshooting
* If the server log shows "httpd_parse: parse_block: request URI/header too long", especially when handling POST requests, then you probably need to increase HTTPD_MAX_REQ_HDR_LEN, which you can find in the project configuration menu (`idf.py menuconfig`): Component config -> HTTP Server -> Max HTTP Request Header Length