2f62b3af4a
Increase job count for heap tests
2020-02-27 17:54:09 +05:30
5f897fd33c
Merge branch 'feat/secure_boot_v2_v41' into 'master'
...
feat/secure_boot_v2: Adding secure boot v2 support to ESP32-ECO3
Closes IDF-799
See merge request espressif/esp-idf!6778
2020-02-27 18:54:08 +08:00
d40c69375c
bootloader: Add fault injection resistance to Secure Boot bootloader verification
...
Goal is that multiple faults would be required to bypass a boot-time signature check.
- Also strengthens some address range checks for safe app memory addresses
- Change pre-enable logic to also check the bootloader signature before enabling SBV2 on ESP32
Add some additional checks for invalid sections:
- Sections only partially in DRAM or IRAM are invalid
- If a section is in D/IRAM, allow the possibility only some is in D/IRAM
- Only pass sections that are entirely in the same type of RTC memory region
2020-02-27 14:37:19 +05:30
5ea4d7ba61
Merge branch 'ci/ut_esp32s2_allow_schedule' into 'master'
...
ci: allow esp32s2 unit tests run by scheduled pipeline
See merge request espressif/esp-idf!7796
2020-02-27 14:48:10 +08:00
7f8c827326
Merge branch 'bugfix/fix_driver_ut_pcnt' into 'master'
...
bugfix(pcnt): fix driver ut pcnt
See merge request espressif/esp-idf!6891
2020-02-27 11:29:28 +08:00
9199207c67
ci: allow esp32s2 unit tests run by scheduled pipeline
2020-02-27 11:20:08 +08:00
301dacfb33
Exception handlers for LoadStoreError and LoadStoreAlignmentError
...
Configurable option to use IRAM as byte accessible memory (in single core mode) using
load-store (non-word aligned and non-word size IRAM access specific) exception handlers.
This allows to use IRAM for use-cases where certain performance penalty
(upto 170 cpu cycles per load or store operation) is acceptable. Additional configuration
option has been provided to redirect mbedTLS specific in-out content length buffers to
IRAM (in single core mode), allows to save 20KB per TLS connection.
2020-02-26 20:21:59 +08:00
9d8e590d86
Merge branch 'fix/spi_flash_legacy_on_esp32s2' into 'master'
...
spi_flash: fix the reading issue using the ROM functions on ESP32-S2
See merge request espressif/esp-idf!7767
2020-02-26 18:04:51 +08:00
4d5c950770
bugfix(pcnt): fix driver ut pcnt
...
* Let `[ignore] case` return to freedom
1) Because this test uses its own ISR, we need to release it with `esp_intr_free` instead of `pcnt_isr_service_uninstall`.
2) `pcnt_evt_queue` needs to be created before the interrupt is registered and needs to be released at the end of each case.
* Add test support for ESP32S2
* Support chip internal connection, no external wiring required.
2020-02-26 16:52:53 +08:00
f8fae4c80c
spi_flash: resume unit tests for ESP32-S2
2020-02-26 11:12:08 +08:00
b79606ca37
feat/secure_boot_v2: Adding tools support for secure boot v2 ECO3
2020-02-25 01:28:22 +05:30
5c0cd9417d
Docs: Encourage to used Python 3
2020-02-24 12:55:55 +01:00
5ccfc332ea
Merge branch 'feature/nvs_erase_check_init' into 'master'
...
NVS Flash: prevent erasing initialized partition
See merge request espressif/esp-idf!7615
2020-02-21 17:47:45 +08:00
b90a68f89b
Merge branch 'bugfix/esp32s2_trax' into 'master'
...
xtensa: add TRAX support for esp32s2
Closes IDF-1408
See merge request espressif/esp-idf!7683
2020-02-21 09:58:15 +08:00
cd114f656b
Merge branch 'fix/gdbstub_large_com_on_windows' into 'master'
...
idf_monitor: fix gdbstub issue opening large COM port number on Windows
See merge request espressif/esp-idf!7619
2020-02-21 09:56:42 +08:00
3b498a0576
Merge branch 'bugfix/confserver_hex_types' into 'master'
...
confserver: Standardize and document the handling of hex values
See merge request espressif/esp-idf!7437
2020-02-20 14:48:15 +08:00
c6deffb8a2
NVS Flash: prevent erasing initialized partition
...
Closes https://github.com/espressif/esp-idf/issues/4755
Closes https://github.com/espressif/esp-idf/issues/2777
* nvs_flash_erase_partition() checks whether
the parition in question is initialized
already and will return an error if so
* reflect changes in the documentation
2020-02-19 18:16:04 +01:00
240ec7444f
ci: add build test for TRAX feature
2020-02-19 14:02:35 +01:00
32ea031b19
Merge branch 'bugfix/bootloader_custom_console_pins' into 'master'
...
Fix bootloader build if custom UART pins are used (Github PR + ESP32-S2 + test)
See merge request espressif/esp-idf!7665
2020-02-19 16:56:15 +08:00
1cbb2287be
ci: add build test for custom console UART pins
2020-02-19 08:13:23 +01:00
dc63badbd2
Merge branch 'feature/add_subdirectory_if_exists' into 'master'
...
cmake: add subdirectory if exists utility
See merge request espressif/esp-idf!7302
2020-02-19 07:54:27 +08:00
ab84c73244
cmake: add subdirectory if exists utility
2020-02-18 17:16:06 +05:00
31edd48b43
C++: Moved all C++ examples to own folder
...
* moved C++ examples to a new cxx folder in
examples
* added experimental C++ component
* added ESPException class to the C++ experimental
component
* added test cases for ESPException and
corresponding test macros
2020-02-18 12:48:57 +08:00
a0644bf8ae
Merge branch 'test/resume_ut_esp32s2' into 'master'
...
ci: resume esp32s2 unit tests
See merge request espressif/esp-idf!7436
2020-02-18 10:58:14 +08:00
b92882a0e6
Merge branch 'bugfix/kconfig_cmake_escape' into 'master'
...
confgen.py: Escape special characters for cmake
Closes IDFGH-2677
See merge request espressif/esp-idf!7580
2020-02-18 08:13:13 +08:00
b00cea250f
idf_monitor: fix gdb issue opening large COM port on Windows
...
The GDB uses CreateFile to open COM port on Windows. However this
function requires COM path to be `\\.\COMx` to open COM port whose
number is larger than 10.
Replace the port name from `COM` to `\\.\COM` when on Windows to fix
this.
2020-02-17 07:39:21 +00:00
d9d7a906b1
confserver docs: Merge the build-system docs info about confserver into the README
...
Add link into the README from the docs
2020-02-17 17:21:22 +11:00
89fb104747
confserver: Standardize and document the handling of hex values
...
Previously, server always sent back "hex" types as JSON integers but would only accept setting them as a
JSON string of hex digits. This still works, but also possible to use JSON integers in both directions.
Add tests for both representations, add a note in the README about types.
2020-02-17 17:21:22 +11:00
8222ab7330
Merge branch 'bugfix/ci_no_attempts_no_custom_toolchain_url' into 'master'
...
ci: no stage attempts variables, no custom toolchain url
See merge request espressif/esp-idf!6689
2020-02-17 11:05:58 +08:00
24b16b0b19
ci: resume esp32s2 unit tests
2020-02-15 18:28:24 +08:00
25041ba583
tools/idf_monitor: automatically decode UART core dumps
...
This adds detection of UART core dumps to IDF monitor. By default,
core dumps are not printed to the console, but are processed by
espcoredump.py using 'info_corefile' command. The result is printed
to stdout.
This feature can be disabled in menuconfig.
In the future this can be extended to allow running espcoredump.py
with 'dbg_corefile' argument, which is similar to the current GDB Stub
behavior.
Related to IDF-52.
2020-02-13 18:46:26 +01:00
605da33c3d
Merge branch 'fix/app_update_test_s2' into 'master'
...
app_update: fix unit tests
See merge request espressif/esp-idf!7581
2020-02-13 23:05:13 +08:00
cdb947113e
Merge branch 'feature/esp_event_multiple_register' into 'master'
...
ESP-Event: Feature/esp event multiple register
See merge request espressif/esp-idf!7384
2020-02-13 19:02:09 +08:00
98ee6f55df
app_update: fix unit tests
2020-02-13 15:51:42 +08:00
935b34e829
confgen.py: Escape special characters for cmake
...
Closes https://github.com/espressif/esp-idf/issues/4751
2020-02-12 14:30:53 +01:00
c1d0daf36d
Merge branch 'refactor/restructure_soc_component' into 'master'
...
soc: separate abstraction, description and implementation
See merge request espressif/esp-idf!7261
2020-02-12 07:50:10 +08:00
80e03a2d2d
Merge branch 'bugfix/win_tools_installer_fixes' into 'master'
...
tools: Windows tools installer release v2.3
Closes IDFGH-2670 and IDFGH-1929
See merge request espressif/esp-idf!7550
2020-02-12 07:22:50 +08:00
69e91959ff
tools: bump version of windows tools installer to v2.3
...
Includes the following fixes:
- bc43d48e: fix Windows Defender checkbox
https://github.com/espressif/esp-idf/issues/4225
- 7a18f02a: idf_tools.py compatibility with virtualenv 20.0
- Fix extracting IDF to a destination on another drive
https://github.com/espressif/esp-idf/issues/4128
https://github.com/espressif/esp-idf/issues/4744
2020-02-11 19:05:17 +01:00
24e793baa3
tools: installer: add PYTHONUNBUFFERED=1 when calling idf_tools.py
...
Fixes the issue that there is no output from 'idf_tools.py install'
stage.
2020-02-11 19:05:17 +01:00
972aeec265
tools: installer: use bundled idf_tools when installing IDF 3.3.1, 4.0
...
This is a workaround for the 'no-site-packages' bug in the version of
idf_tools.py shipped in v4.0 and v3.3.1 (see 7a18f02ac
2020-02-11 19:05:17 +01:00
b67a7f48a9
tools: installer: fix copying IDF to a destination on another drive
...
Closes https://github.com/espressif/esp-idf/issues/4128
Closes https://github.com/espressif/esp-idf/issues/4744
2020-02-11 19:05:17 +01:00
9b4815e3c8
ESP Event: multiple registrations to one event
...
* It's possible now to register the same handler
several times to one specific event, using
a dynamic handle object.
2020-02-11 10:52:05 +01:00
16e0c93e40
ci: solve public headers errors
2020-02-11 14:30:42 +05:00
bcd2358eb6
Merge branch 'bugfix/idf_tools_virtualenv' into 'master'
...
idf_tools.py: fix install-python-env failure with virtualenv 20.0.0
See merge request espressif/esp-idf!7549
2020-02-11 16:42:41 +08:00
ab5dad3be5
Merge branch 'feature/esp_netif_flexible_init' into 'master'
...
esp netif: minor API update, more flexible wifi init
Closes IDFGH-2523
See merge request espressif/esp-idf!7487
2020-02-11 12:01:20 +08:00
7bd2677d5d
Merge branch 'bugfix/ci_doc_fixes' into 'master'
...
docs: CI fixes
See merge request espressif/esp-idf!7539
2020-02-11 06:38:34 +08:00
9bdcd40f2b
ESP-NETIF: add CI compile only tests for common init/config pattern in C/C++
2020-02-10 19:40:28 +01:00
7a18f02acd
idf_tools.py: fix install-python-env failure with virtualenv 20.0.0
...
--no-site-packages is the default behavior since virtualenv 1.7
(released in Nov 2011). This option was removed in virtualenv 20.0.
2020-02-10 19:14:41 +01:00
d6a5bb60da
ci: remove using IDF_XTENSA_TOOLCHAIN_URL because there are idf_tools.json and multi-target support
2020-02-10 18:05:21 +07:00
0441c5d744
docs ci: Use the final version of the esp-idf-doc-env image
...
(Content is the same)
2020-02-10 19:55:46 +11:00
Supreet Deshpande