mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
24 584 Commity
20 Gałęzie
149 Tagi
417 MiB
Wykres commitów

41 Commity (8357fc728ff45a0adb23ad847c4d286107aa2856)

Autor SHA1 Wiadomość Data
Cao Sen Miao ec6a56ed0c spi_flash: re-enable the HPM mode on several XMC chips 2022-07-22 09:54:56 +08:00
Roland Dobai d56c578ddb tools: Rename the flash size detection kconfig option 
9c46c98b4c have changed the default value
of ESPTOOLPY_FLASHSIZE_DETECT. As the side effect, existing
projects (having the option still enabled) started to discard the SHA256 digest.

Rename the ESPTOOLPY_FLASHSIZE_DETECT option so existing projects would
have the value disabled by default.

Closes https://github.com/espressif/esp-idf/issues/9148
 2022-06-14 15:56:20 +02:00
Roland Dobai 9c46c98b4c Tools: Don't add SHA256 digest to images when flash size detection is enabled 2022-06-01 08:57:07 +02:00
Cao Sen Miao 4418a855ba spi_flash: refactor the spi_flash clock configuration, and add support for esp32c2 2022-04-26 15:22:37 +08:00
Cao Sen Miao 52e88a0073 spi_flash: esptool temporarily supports C2/H2 clock configurations 2022-04-11 10:46:02 +08:00
rudi ;-) f242a1705a
add support for Flash 32MB..128MB (S2, S3) 
ESP32-S2 and ESP32-S3
supports up to 1 GB of external flash and RAM
add support for
-    32MB
-    64MB
-    128MB ( example NOR spiFLASH 1G-BIT W25Q01JVZEIQ Winbond 0xEF 0x40 0x21 )

Merges https://github.com/espressif/esp-idf/pull/7688

Signed-off-by: Ivan Grokhotkov <ivan@espressif.com>
 2022-02-21 10:26:41 +03:00
Roland Dobai 36a4011ff8 Tools: Custom baud-rate setup is not possible for IDF Monitor from menuconfig anymore 
IDF Monitor follows the console baud rate by default. Other baud rate
can be set from command line by "idf.py monitor -B <baud>" or through
environment variables. Run "idf.py monitor --help" for more information.
 2022-01-24 18:13:38 +01:00
Roland Dobai aedb846a20 Tools: IDF Monitor follows the UART console baud rate by default 2022-01-24 18:13:38 +01:00
laokaiyao cf049e15ed esp8684: rename target to esp32c2 2022-01-19 11:08:57 +08:00
wuzhenghui 388615add0 update esp32h2beta2 chip_id to 14 2021-11-24 12:30:43 +08:00
wuzhenghui 968c42d88c 822 FPGA rnv init 2021-11-24 12:30:17 +08:00
Roland Dobai 9c1d4f5b54 Build & config: Remove the "make" build system 
The "make" build system was deprecated in v4.0 in favor of idf.py
(cmake). The remaining support is removed in v5.0.
 2021-11-10 09:53:53 +01:00
Cao Sen Miao 9ab043574d ESP8684: update esptool 2021-11-06 17:33:45 +08:00
Armando f9fa38463a spi_flash: make 120m config only visible on s3 sdr mode 2021-10-28 19:36:34 +08:00
Armando 2655a506c9 mspi: support auto detect octal flash vendor 2021-10-08 15:59:57 +08:00
Cao Sen Miao 6c0aebe279 esp_flash: add opi flash support in esp_flash chip driver, for MXIC 2021-09-07 14:44:40 +08:00
Cao Sen Miao 559c1ac3f9 esp_flash: add support mxic as a main flash under spi mode 2021-09-05 00:33:28 +08:00
Armando a3dc625da6 mspi: support 120MHz Quad Flash and PSRAM on ESP32S3 2021-08-31 16:06:44 +08:00
sly 11dfd802e0 esp32h2: add rtc clock support 2021-08-26 11:25:39 +08:00
Armando d325f4d557 mspi: support octal flash 120M STR mode on esp32s3 2021-08-19 10:44:30 +08:00
Shu Chen 2b9e8fed71 esp32h2: add esp32h2 build target 
Add esp32h2 support in the following components:
 * Kconfig
 * components/esptool_py
 * components/riscv
 * components/xtensa
 * tools
 2021-07-01 19:51:33 +08:00
Armando bc248278f8 spiflash: add octal spi psram support on 727 2021-06-25 19:41:57 +08:00
me-no-dev b64fd872bc Allow esptool's download stub to be disabled by other options and applications 
Currently USB CDC Download requires the `--no-stub` option of `esptool`. This change inverts the Kconfig option to negative, so that it can be `selected` by other options or enabled in applications through `sdkconfig.defaults`.
 2020-09-16 03:25:53 +00:00
Angus Gratton f1ac79747b monitor: Add a "Same as UART Console baud rate" setting 
Usually the monitor will want to run at the same speed as the boot log output.
 2020-07-10 16:58:05 +10:00
Angus Gratton d45eabe676 esptool: Add support for ESP32-S2 Secure Download Mode 
* Pass --no-stub from build system if configured to enable ESP32-S2 Secure Download Mode
* Update esptool submodule
 2020-05-28 17:52:15 +10:00
Angus Gratton 5bd75b134d esptool: Set 80MHz SPI flash speed for ESP32-S2 & future chips 
Most ESP32 devices will also work at 80MHz, but third party boards/modules
may not have been tested at this speed so the default is kept at 40MHz for safety.
 2020-05-20 06:19:34 +00:00
Angus Gratton 47bbb107a8 build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00
Roland Dobai 997b29a9ca Rename Kconfig options (components/esptool_py) 2019-05-21 09:32:55 +02:00
Roland Dobai 37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
Angus Gratton 2909fc182b esptool: Remove tabs from KConfig.projbuild 2018-05-29 16:34:45 +10:00
Angus Gratton 2f4079ebb2 cmake: Hide serial port settings in menuconfig when using cmake 2018-05-29 16:34:45 +10:00
Angus Gratton 4a2f1f0354 esptool: Add note that ESPTOOLPY_PORT & ESPTOOLPY_BAUD are ignored when using idf.py 2018-04-30 09:59:20 +10:00
Angus Gratton 527720fb5b esptool: Update esptool.py to integrate reset fix for older dev boards 
Originally marked "Reset with ESP32R0 Windows workaround", but proven to be
necessary on some other platforms as well. This is now integrated into the
default esptool.py reset behaviour.

Closes #305 https://github.com/espressif/esp-idf/issues/305
 2017-03-03 15:34:04 +11:00
Angus Gratton 68cba2a1fb Bootloader: Support switching to Quad I/O mode during boot process 2017-02-09 08:44:05 +11:00
Angus Gratton 03551ec2da build system: Add 'make monitor' target from arduino-esp32 
Originally added to arduino-esp32 by @me-no-dev. It's so useful, we
want it in esp-idf as well! :)
 2017-01-03 10:59:10 +11:00
Angus Gratton d245f016ea esptool: Add new options to reset before/after, detect flash size 2016-12-30 14:19:46 +11:00
Ivan Grokhotkov 42827ff869 bootloader, menuconfig: add flash size setting support 2016-10-21 15:27:25 +11:00
Jeroen Domburg 5a0e374a46 Set default SPI flash access mode to DIO 2016-09-08 10:22:15 +08:00
Jeroen Domburg 669e85758c Add flash freq selection to menuconfig 2016-09-06 14:24:28 +08:00
Jeroen Domburg 4272996ebe Add QIO/QOUT/DIO/DOUT select for esptool.py 2016-09-06 14:24:14 +08:00
Ivan Grokhotkov bd6ea4393c Initial public version 2016-08-17 23:08:22 +08:00