17adb40ca8
bootloader: Calculate SHA256 hash of image on every boot
...
Makes app image booting more reliable (256-bit rather than 8-bit verification.)
Some measurements, time to boot a 655KB app.bin file and run to app_main() execution.
(All for rev 1 silicon, ie no 340ms spurious WDT delay.)
80MHz QIO mode:
before = 300ms
after = 140ms
40MHz DIO mode:
before = 712ms
after = 577ms
40MHz DIO mode, secure boot enabled
before = 1380ms
after = 934ms
(Secure boot involves two ECC signature verifications (partition table, app) that take approx 300ms each with 80MHz CPU.)
2017-07-19 18:31:59 +10:00
105c4b7386
Merge branch 'feature/esptool_image_padding' into 'master'
...
esptool: Optimise app image size by using RAM-loaded data for padding
See merge request !1017
2017-07-19 15:52:22 +08:00
d92c541b1a
esptool: Optimise generated image size by using RAM-loaded data for padding
...
Can save almost 128KB from some images.
2017-07-19 16:24:17 +10:00
d664e32394
build system: Use component.mk for all components, refactor bootloader build
...
For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1"
Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader
project works, it's now mostly independent from the parent.
2017-07-19 09:10:48 +10:00
c26baeb610
esptool: Update to v2.0.1
...
Fixes issue with GPIO 0 being enabled as an output on ESP32D2WD (or when setting SPI pins in efuse)
and not using Quad-I/O modes.
Ref: https://esp32.com/viewtopic.php?f=2&t=2205
2017-06-26 12:16:09 +10:00
6068c1be9a
esptool: Update to v2.0 final release
...
For IDF use, most changes are minor compared to 2.0-beta3.
One notable addition, esptool.py now prints chip model & silicon
revision when it connects.
2017-06-14 15:41:51 +10:00
66308774db
esptool: Update to include ESP32-D2WD support (and other SPI flash remapping)
2017-04-13 16:25:15 +10:00
e477ce93e9
idf_monitor: Small fixes (baud rate, EOL, /dev/tty.X on macOS, Ctrl-T on failure)
...
* "make monitor" not passed the configured baud rate
Closes #436 https://github.com/espressif/esp-idf/issues/436
* Pass toolchain prefix from sdkconfig into monitor tool
* Allow setting EOL in idf_monitor.py, use CRLF by default
* Detect if /dev/tty.X is used on macOS, warn and replace with /dev/cu.X
* If a build fails or gdb exits, ignore Ctrl-T (allowing Ctrl-T Ctrl-A/F to be same key sequence everywhere)
* Add a note about winpty on Windows
Ref 02fdf8271d (commitcomment-21369196)
2017-03-21 16:00:32 +08:00
1544544f8a
tools: New idf_monitor 'make monitor' tool for smarter monitor output
2017-03-13 09:31:45 +08:00
527720fb5b
esptool: Update esptool.py to integrate reset fix for older dev boards
...
Originally marked "Reset with ESP32R0 Windows workaround", but proven to be
necessary on some other platforms as well. This is now integrated into the
default esptool.py reset behaviour.
Closes #305 https://github.com/espressif/esp-idf/issues/305
2017-03-03 15:34:04 +11:00
5ea9097dbd
esptool: Update to latest v2.0 beta version
...
* New "espefuse.py set_flash_voltage" command to easily set a fix
VDD_SDIO regulator voltage (1.8V, 3.3V or disabled).
* Fixes bugs when flashing files with non-4-byte aligned lengths
(doesn't effect esp-idf image files)
* README improvements
2017-03-03 15:34:04 +11:00
68cba2a1fb
Bootloader: Support switching to Quad I/O mode during boot process
2017-02-09 08:44:05 +11:00
c4b3f6bbbc
Update esptool.py to v2.0-beta1
...
Minor bug fixes, no major functionality changes.
2017-01-10 14:04:54 +11:00
03551ec2da
build system: Add 'make monitor' target from arduino-esp32
...
Originally added to arduino-esp32 by @me-no-dev. It's so useful, we
want it in esp-idf as well! :)
2017-01-03 10:59:10 +11:00
d245f016ea
esptool: Add new options to reset before/after, detect flash size
2016-12-30 14:19:46 +11:00
abb7668af7
build system: Fix bug where erase_flash was always invoked for flash
...
Order-only prerequisites do not work for phony targets!
2016-12-22 16:37:28 +11:00
a760eb3980
Merge branch 'feature/erase_flash' into 'master'
...
Build system: Add `make erase_flash` target
See merge request !328
2016-12-22 09:53:25 +08:00
59e0f63d37
Build system: Add `make erase_flash` target
2016-12-20 10:00:04 +11:00
d6fafd00db
Secure boot: Option for app & partition table signing to happen outside build system
2016-12-19 13:12:05 +11:00
a9d5e26748
Secure boot: Correctly re-sign if signing key changes, better error if missing
2016-12-01 23:49:12 -08:00
506c8cd964
secure boot & flash encryption: Rework configuration options
...
Add UART bootloader disable options for flash encryption
2016-12-01 23:49:12 -08:00
9eb135fd73
Flash encryption: Support enabling flash encryption in bootloader, app support
...
* App access functions are all flash encryption-aware
* Documentation for flash encryption
* Partition read/write is flash aware
* New encrypted write function
2016-12-01 23:49:12 -08:00
7a41ab6982
Merge branch 'master' into feature/btdm_bluedroid
...
1. update bt lib submodule
# Conflicts:
# components/bootloader/src/main/esp32.bootloader.ld
# components/bt/component.mk
# components/esp32/component.mk
# components/esp32/lib
2016-11-24 15:45:04 +08:00
24b4c17ead
build system: Refactor SubmoduleCheck to work project-wide
...
Required at project level because some components use header files in
other components' submodules, and one component with a
submodule (esptool.py) doesn't have or need a component.mk.
2016-11-17 09:18:51 +11:00
c15024e629
Merge branch 'master' into feature/build_component_project_vars
2016-11-14 14:54:41 +11:00
5a5e19cd8b
Bump esptool revision (espefuse.py fixes)
2016-11-14 11:08:42 +11:00
e459f803da
secure boot: Functional partition table & app signature verification
2016-11-14 11:08:42 +11:00
64f3893cb9
secure boot: Derive secure bootloader key from private key
...
Means only one key needs to be managed.
2016-11-14 11:08:42 +11:00
b5de581399
Secure boot: initial image signature support
2016-11-14 11:08:42 +11:00
341593f7d2
build system: Remove need for $(Q) macro in recipes, use --silent in MAKEFLAGS instead
2016-11-11 12:32:47 +11:00
4ba1b73eba
build system: Add espefuse/espsecure support for secure boot
2016-11-02 10:41:59 +11:00
42827ff869
bootloader, menuconfig: add flash size setting support
2016-10-21 15:27:25 +11:00
7104284e31
Bump esptool version
...
Incorporates fix for locked flash #50
2016-10-21 15:26:11 +11:00
79bd6af7e7
build system: Print a WARNING if any submodule is out of date
...
Inspired by Github #27 and related "gotchas" with keeping submodules up to date.
2016-10-11 07:56:08 +11:00
a20c2f1088
'make flash' targets: Print serial port when flashing
...
Inspired by github #30 and related mentions where selected serial port
is not clear from the make output.
2016-10-11 07:56:08 +11:00
46e88e9f24
esptool: Bump upstream revision
...
Fixes github #14 (unexpected errors writing to DIO flash)
Also speed boost when writing compressed data (can now go via stub)
2016-09-26 17:21:11 +10:00
fcf278848d
Merge branch 'master' into feature/esptool_upstream
2016-09-12 18:02:10 +10:00
5810dbef05
make: Add macro to test for & try to fix up files required for submodules
...
Now applied to both esptool.py & esp32 wifi libs
2016-09-12 18:00:20 +10:00
5a0e374a46
Set default SPI flash access mode to DIO
2016-09-08 10:22:15 +08:00
669e85758c
Add flash freq selection to menuconfig
2016-09-06 14:24:28 +08:00
4272996ebe
Add QIO/QOUT/DIO/DOUT select for esptool.py
2016-09-06 14:24:14 +08:00
96852d49c2
Load esptool.py from submodule, currently WIP esptool.py v2.0
...
More details at https://github.com/themadinventor/esptool/pull/121
2016-09-01 18:45:10 +10:00
d793d23b94
Remove bin/ directory in favour of an add_path.sh script that can be sourced
...
Remaining file in bin/ will be moved out as part of !34
2016-09-01 18:45:10 +10:00
aa4c31f3b0
esptool.py & Makefile: Fix compressed upload support (enabled by default)
2016-08-22 18:44:46 +08:00
f853f94335
Use IDF_PATH instead of SDK_PATH for the environment variable pointing to esp-idf
...
This will require a matching change in all projects using ESP-IDF.
2016-08-19 15:01:49 +08:00
14eb490bb3
make: 'make all' default target builds everything, 'make flash' flashes everything
...
Also added 'make help' target which prints some useful usage summary.
2016-08-18 21:42:37 +08:00
bd6ea4393c
Initial public version
2016-08-17 23:08:22 +08:00
Angus Gratton