Wykres commitów

211 Commity (465d517fbdc994f604ca19d06da595e07e16b5d2)

Autor SHA1 Wiadomość Data
Angus Gratton c38c3ff3f0 spi_flash: Remove 16KB free internal heap limit for esp_flash_read() into PSRAM
Allocation of the temporary internal buffer will now repeat until a small enough buffer can be
allocated, and only fail if less than a 256 byte block of internal RAM is free.

Adds unit test for the same, and generic test utility for creating memory pressure.
2020-03-09 09:59:43 +11:00
Angus Gratton af4c6ac0f3 spi_flash: Fix over-allocation and OOM crash when reading from SPI flash to PSRAM buffers
Previously would try allocate buffer of minimum size 16KB not maximum size 16KB, causing
out of memory errors for any large reads, or if less than 16KB contiguous free heap.

Also, if using legacy API and internal allocation failed then implementation would abort()
instead of returning the error to the caller.

Added test for using large buffers in PSRAM.

Closes https://github.com/espressif/esp-idf/issues/4769

Also reported on forum: https://esp32.com/viewtopic.php?f=13&t=14304&p=55972
2020-03-05 17:11:26 +11:00
Michael (XIAO Xufeng) 6f6677ac42 spi: move deprecated functions into internal header
Resolves https://github.com/espressif/esp-idf/issues/4132
2019-12-24 17:43:32 +08:00
Angus Gratton 510ec904c9 spi_flash tests: Fix exclusion of new API tests in legacy mode 2019-12-11 15:57:49 +11:00
Michael (XIAO Xufeng) b5d04a21fb esp_flash: fix the quad issue for some GD flash chips
The GD flash with product ID 40H, is already used in Wrover-nosufix modules.
2019-11-21 12:26:15 +08:00
Michael (XIAO Xufeng) 337b1df430 esp_flash: add unit test for external flash and QE toggling
Tests for external flash chips used to controlled by macros, one bin for
one chip. And tests are done manually. This commit refactored the test
so that all 3 chips can all run in single test.
2019-11-21 12:26:15 +08:00
Michael (XIAO Xufeng) 41e64bd79c esp_flash: rename internal variables for better readability
chip_drv in HAL are renamed as host
2019-11-21 12:26:14 +08:00
Michael (XIAO Xufeng) 2b7681ec4f esp_flash: fix set qe bit and write command issues
There used to be dummy phase before out phase in common command
transactions. This corrupts the data.

The code before never actually operate (clear) the QE bit, once it finds
the QE bit is set. It's hard to check whether the QE set/disable
functions work well.

This commit:

1. Cancel the dummy phase

2. Set and clear the QE bit according to chip settings, allowing tests
   for QE bits. However for some chips (Winbond for example), it's not
   forced to clear the QE bit if not able to.

3. Also refactor to allow chip_generic and other chips to share the same
   code to read and write qe bit; let common command and read command share
   configure_host_io_mode.

4. Rename read mode to io mode since maybe we will write data with quad
   mode one day.
2019-11-21 12:26:14 +08:00
Jiang Jiang Jian 2056b891d3 Merge branch 'bugfix/ext_flash_load_partitions_v4.0' into 'release/v4.0'
spi_flash: ensure partition table loaded when esp_partition_register_external is called (backport v4.0)

See merge request espressif/esp-idf!6402
2019-10-21 10:33:01 +08:00
Ajita Chavan 32b8b60dc5 flash_ops: fix spi_flash_read with source buffer not from internal memory and size < 16
Closes https://github.com/espressif/esp-idf/issues/4010
2019-10-19 15:00:00 +08:00
Ivan Grokhotkov 0fc30f4379 spi_flash: load partition table before adding an external partition
esp_partition_register_external did not call load_partitions, so if
it was called before any call to esp_partition_find, then the main
partition table would never be loaded. Introduce new function,
ensure_partitions_loaded, and call it both from esp_partition_find and
esp_partition_register_external.

Closes https://github.com/espressif/esp-idf/issues/4116
2019-10-18 11:14:32 +02:00
Ivan Grokhotkov e5ff431b35 Merge branch 'fix/esp_flash_coredump_4.0' into 'release/v4.0'
esp_flash: fix coredump issues (backport v4.0)

See merge request espressif/esp-idf!6136
2019-09-26 21:26:53 +08:00
michael 0bba92b2a0 esp_flash: put adapter to legacy functions into IRAM to be back-compatible 2019-09-18 15:16:00 +08:00
Michael (XIAO Xufeng) d3b54ec84a esp_flash: fix the coredump issue
During coredump, dangerous-area-checking should be disabled, and cache
disabling should be replaced by a safer version.

Dangerous-area-checking used to be in the HAL, but it seems to be more
fit to os functions. So it's moved to os functions. Interfaces are
provided to switch between os functions during coredump.
2019-09-18 14:30:23 +08:00
Michael (XIAO Xufeng) e4b44f3488 esp_flash: fix coredump for legacy spi flash API
When legacy mode is used, the coredump still fails during linking
because "esp_flash_init_default_chip", "esp_flash_app_init" and
"esp_flash_default_chip " are not compiled and linked.

Instead of using ``if`` macros in callers, these functions are protected
by ``if`` macros in the header, and also not compiled in the sources.
"esp_flash_default_chip" variable is compiled with safe default value.
2019-09-18 14:28:12 +08:00
Michael (XIAO Xufeng) b9a2639ab4 esp_flash: add support for encrypted read and write
Using legacy implementation.
2019-09-16 17:10:08 +08:00
Ivan Grokhotkov b17ca9cb38 unit-test-app: add config with flash encryption enabled 2019-09-10 17:20:19 +02:00
Ivan Grokhotkov 801010dac6 spi_flash: fix mmap unit tests for flash encryption 2019-09-10 17:20:19 +02:00
Ivan Grokhotkov ad100e497a spi_flash: remove duplicate definition of spi_flash_unlock
The other (static) definition is in flash_ops.c, all references are
also in flash_ops.c.
2019-09-10 17:18:51 +02:00
Michael (XIAO Xufeng) a626b26cf9 esp_flash: improve the comments a bit 2019-08-20 14:05:35 +08:00
Michael (XIAO Xufeng) 1cc860216e esp_flash: fix the set/get write protection functions
Add support for get write protection support, fixed the duplicated
set_write_protection link.

All the write_protection check in the top layer are removed. The lower
levels (chip) should ensure to disable write protection before the
operation start.
2019-08-20 14:05:35 +08:00
Angus Gratton 058ef98c33 Merge branch 'feature/cmake_default_build_system' into 'master'
cmake: Make CMake the default build system

Closes IDF-198 and IDF-325

See merge request espressif/esp-idf!5328
2019-07-10 08:16:39 +08:00
Angus Gratton 47bbb107a8 build system: Use CMake-based build system as default when describing commands 2019-07-08 17:31:27 +10:00
Martin Thierer d6c2dad101 esp_partition_erase_range(): rename parameter "start_addr" to "offset"
The name "start_addr" (which goes straight into the docs) implies
it's an absolute address while in fact it's an offset into the
partition like what's used in all the other esp_partition_*
functions.

So in order to avoid confusion make the name consistent with the
parameter names used for the other partition functions and call it
"offset".

Merges https://github.com/espressif/esp-idf/pull/3750
2019-07-08 17:29:05 +10:00
Ivan Grokhotkov 1c17558e6e spi_flash: use same argument types in .h and .c files
Fixes compilations on targets where size_t != uint32_t
2019-07-02 10:26:06 +02:00
Ivan Grokhotkov ec427a5b43 spi_flash: support for partitions in external flash 2019-07-02 10:26:06 +02:00
Michael (XIAO Xufeng) d6bd24ca67 esp_flash: add initialization interface for SPI devices 2019-06-27 13:27:27 +08:00
Renz Christian Bagaporo 9b350f9ecc cmake: some formatting fixes
Do not include bootloader in flash target when secure boot is enabled.
Emit signing warning on all cases where signed apps are enabled (secure
boot and signed images)
Follow convention of capital letters for SECURE_BOOT_SIGNING_KEY
variable, since it is
relevant to other components, not just bootloader.
Pass signing key and verification key via config, not requiring
bootloader to know parent app dir.
Misc. variables name corrections
2019-06-21 19:53:29 +08:00
Renz Christian Bagaporo 9eccd7c082 components: use new component registration api 2019-06-21 19:53:29 +08:00
Michael (XIAO Xufeng) 37cb673cd7 esp_flash: update the document to the latest API 2019-06-20 11:50:23 +08:00
Ivan Grokhotkov 026533cd72 esp_flash: fix C++ compilation and some typos 2019-06-20 10:55:13 +08:00
Michael (XIAO Xufeng) caf121e4b6 esp_flash: break the inappropriate include chain in spi_flash_host_drv.h 2019-06-20 10:55:12 +08:00
Michael (XIAO Xufeng) 1036a091fe spi_flash: support working on differnt buses and frequency 2019-06-18 06:32:52 +00:00
Angus Gratton ce4de867d6 spi_flash: New low-level flash API 2019-06-18 06:32:52 +00:00
Kirill Chalov 4faf2de035 Doc/review api ref storage 2019-06-17 14:23:52 +08:00
Wang Jia Lin e2d1c6234f Merge branch 'bugfix/improve_flash_dio_read_timing' into 'master'
bugfix(flash): fix flash dio read mode configuration error on SPI0

See merge request idf/esp-idf!5086
2019-06-14 12:10:46 +08:00
Roland Dobai 22d070e0af spi_flash: Rename long Kconfig options 2019-06-12 08:03:07 +02:00
Roland Dobai 842384a0d3 spi_flash: Fix Kconfig indentation
Closes https://github.com/espressif/esp-idf/issues/3598
2019-06-12 08:03:07 +02:00
Renz Christian Bagaporo 54ef60f26b component: revert some of the dependency corrections
!4452 and !4897 made some ill-advised corrections to dependency info;
revert those in this MR. Handling pre-built binaries as imported
libraries is retained, however.
2019-06-11 18:09:26 +08:00
Konstantin Kondrashov 399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
chenjianqiang d68f1907ef bugfix(flash): improve flash dio read timing
When flash work in DIO Mode, in order to ensure the fast read mode of flash
is a fixed value, we merged the mode bits into address part, and the fast
read mode value is 0 (the default value).
2019-05-28 14:51:04 +08:00
Roland Dobai 1ad2283641 Rename Kconfig options (components/bootloader) 2019-05-21 09:32:55 +02:00
Roland Dobai 0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
Renz Christian Bagaporo 477fa49fc0 examples: update idf_as_lib example to use new api 2019-05-14 18:01:14 +08:00
Renz Christian Bagaporo ffec9d4947 components: update with build system changes 2019-05-13 19:59:17 +08:00
Tim Nordell 7892cf6a03 partition: Fix "encrypted" read/write when encryption is disabled
According to the documentation[1][2] for partitions, setting the encrypted
flag for partitions should be a no-op when system level encryption isn't
enabled.  The current implementation, however, does not actually match
the documentation and it ends up with an unreadable partition via the
partition API if a partition flag is marked as encrypted without
system-level encryption enabled.  (This is because the writes go through
the encryption block, and reads do not go through the encryption block
when this situation occurs causing unreadable data to the application
running.) This fixes up the read-back of the partition table to match
whether or not the partition is currently encrypted under the hood.

This should not affect the bootloader's code for reading/writing encrypted
partitions as the bootloader directly invokes the spi_flash_write*(...)
APIs.

[1] https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/partition-tables.html#flags
[2] https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html#encrypted-partition-flag

Closes https://github.com/espressif/esp-idf/pull/3328

Signed-off-by: Tim Nordell <tim.nordell@nimbelink.com>
2019-05-03 15:03:04 +05:30
Michael (XIAO Xufeng) 562af8f65e global: move the soc component out of the common list
This MR removes the common dependency from every IDF components to the SOC component.

Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components.
But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components.

In CMAKE, we have two kinds of header visibilities (set by include path visibility):

(Assume component A --(depends on)--> B, B is the current component)

1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B)
2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only)

and we have two kinds of depending ways:

(Assume component A --(depends on)--> B --(depends on)--> C, B is the current component)

1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B)
2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B)

1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default.
2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it.
3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers
4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link)

This is a breaking change. Previous code may depends on the long include chain.
You may need to include the following headers for some files after this commit:

- soc/soc.h
- soc/soc_memory_layout.h
- driver/gpio.h
- esp_sleep.h

The major broken include chain includes:

1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h.
2. ets_sys.h no longer includes soc/soc.h
3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h

some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h

BREAKING CHANGE
2019-04-16 13:21:15 +08:00
Renz Christian Bagaporo 90ee405afd ldgen: update component linker fragment files 2019-04-04 15:57:34 +08:00
morris dbdb299bb1 create xtensa component
1. move xtensa specific files out of esp32 component
2. merge xtensa-debug-module component into xtensa
2019-03-27 20:24:28 +08:00
morris a2f07b0806 move common include files from esp32 into esp_common 2019-03-26 11:57:03 +08:00