introduced in e44ead5356
1. The int8M power domain config by default is PD. While LEDC is using
RTC8M as clock source, this power domain will be kept on.
But when 8MD256 is used as RTC clock source, the power domain should
also be kept on.
On ESP32, there was protection for it, but broken by commit
e44ead5356. Currently the power domain
will be forced on when LEDC is using RTC8M as clock source &&
!int8m_pd_en (user enable ESP_PDP_DOMAIN_RTC8M in lightsleep). Otherwise
the power domain will be powered off, regardless of RTC clock source.
In other words, int8M domain will be forced off (even when 8MD256
used as RTC clock source) if LEDC not using RTC8M as clock source, user
doesn't enable ESP_PDP_DOMAIN_RTC8M, or in deep sleep.
On later chips, there's no such protection, so 8MD256 could't be used as
RTC clock source in sleep modes.
This commit adds protection of 8MD256 clock to other chips. Fixes the
incorrect protection logic overriding on ESP32. Now the power domain
will be determiend by the logic below (order by priority):
1. When RTC clock source uses 8MD256, power up
2. When LEDC uses RTC8M clock source, power up
3. In deepsleep, power down
4. Otherwise determined by user config of ESP_PDP_DOMAIN_RTC8M,
power down by default. (This is preferred to have highest
priority, but it's kept as is because of current code structure.)
2. Before, after the macro `RTC_SLEEP_CONFIG_DEFAULT` decides dbias, the
protection above may force the int8m PU. This may cause the inconsistent
of dbias and the int8m PU status.
This commit lifts the logic of pd int8m/xtal fpu logic to upper layer
(sleep_modes.c).
Related: https://github.com/espressif/esp-idf/issues/8007, https://github.com/espressif/esp-idf/pull/8089
temp
check_kconfigs.py would only correctly handle "source", but not "rsource", "osource"
or "orsource".
Fixed any warnings detected after updating the test.
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
In c4bcf111, soc_memory_types.h header was moved from soc to
esp_hw_support. Since some of the functions are also used in
bootloader and because esp_hw_support is not part of the bootloader
build, part of the functions were moved into bootloader_support.
To make these functions available to the app, bootloader_support was
added as a public dependency of esp_hw_support.
Since esp_hw_support is in common requirements list, this has added
bootloader_support as a public requirement to every component in the
build. Adding new public requirements outside of common components
is undesirable, since components may accidentally include headers
from bootloader_support without explicitly declaring it as a
requirement.
This commit reverts this addition. Until a better solution is found,
some part of esp_memory_utils.h is duplicated into
bootloader_memory_utils.h. A CI check is added to make sure these
files stay in sync.
1. Clean up clk usage in IDF, replace rtc_clk_xtal/apb_freq_get with
upper level API esp_clk_xtal/apb_freq
2. Fix small errors and wrong comments related to clock
3. Add clk_tree_defs.h to provide an unified clock id for each chip
Modify the NGed drivers to adopt new clock ids
Marius Vikhammer