Also remove event_queue_size from esp_modem_dte_t because
event_queue_size is only used in esp_modem_dte_init.
Fixes: 817c0e3019 ("esp_modem: UART runtime configuration of esp-modem")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Basic set of configuration related to UART moved from KConfig
to runtime configuration structure to simplify reusing the component for
testing and examples.
Fixes Guru Meditation Error: Core 0 panic'ed (LoadProhibited) when config with
CONFIG_PM_ENABLE=y && CONFIG_PM_DFS_INIT_AUTO=y.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Merges https://github.com/espressif/esp-idf/pull/4904
pppos_client example used the UART default clock configuration which might
cause issues if power management enabled. Settings updated to UART_SCLK_REF_TICK
Also need to explicitly disable RX interrupts in UART pattern detection
mode.
Closes https://github.com/espressif/esp-idf/issues/4801
Since the recent refactoring of spi bus_lock comonent introduced heavy logging under debug/verbose level of verbosity, the http-server test executed in the CI became less stable due to complicated regex. Fixed by removing the first optional group
check master read write functions with array of registers)
fix master serial processing code and modbus controller to work with register array
modbus_master: add reading and writing of test value array (58 registers) to check failure is gone
remove parameter temporary buffer from modbus controller to allow more than 24 byte writes
driver: fix issue with TOUT feature
driver: fix uart_rx_timeout issue
driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw
driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt
examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly
examples: update examples to use tout feature
driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c
driver: change conditions to trigger workaround for tout feature in uart.c
driver: change uart_set_always_rx_timeout()
freemodbus: fix tabs, remove commented code
driver: remove uart_ll_is_rx_idle()
Fix below build error:
../main/udp_client.c: In function 'udp_client_task':
../main/udp_client.c:58:41: error: 'addr_str' undeclared (first use in this function); did you mean 'caddr_t'?
Fixes: 995ef85e85 ("socket examples: add tests for server and client applications")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
tout_thr - move calculation and masking into hal layer update driver and uart_ll (add uart_ll_set_rx_tout)
move tout calculation into uart_ll
move calculation of time out in bit time for esp32s2 into low level uart_ll.h file
move uart_hal_get_symb_len() into hal
update set_rx_timeout() to warn user about incorrect value
update HAL, LL 1
fix uart_xx_set_rx_tout() to convert symbol time into bit time
update param description
update tout calculation in LL
update uart_hal_get_max_rx_timeout_thrd() and uart_ll_get_max_rx_timeout_thrd()
Implementation of `esp_tls_conn_new_sync` now uses timeout_ms value to
give up retries.
Specified this value to be 10 sec. (10 * 1000 ms).
Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
Use buffer to accumulate data of response from event handler and print the response on console
Demonstrate use of user_data field in esp_http_client_config_t to get response body
calling esp_netif_up() and esp_netif_down() was not supported if the
underlying netif wos of ppp type. Updated the code to enable setting
these interfaces up/down and registered actions in moden_netif glue for
connection/disconnection events to set the netif up/down.
Adds the ESP certificate bundle feature that enables users to bundle a
root certificate bundle together with their application.
Default bundle includes all Mozilla root certificates
Closes IDF-296
When library users call esp_stop_ppp(), it is expected that the PPP link
is closed and the DCE is moved into command mode.
If the STOP event is not posted into the event loop, then the PPP stack
would not be turned off, resulting in the impossibility to switch into
command mode, as the modem is still sending PPP binary data.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4642
This is based on `ssl_mail_client` from mbedtls.
The client also adds functionality to send attachments.
Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
This was accidently commited bug when convert to use esp-netif, fix it.
Fixes: 25913af2cc ("pppos_client: udated example code to use esp-netif in PPP configuration")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Merges https://github.com/espressif/esp-idf/pull/4618
docs: Add System time chapter and for sntp a description about using...
Closes IDFGH-2237, IDF-1199, and IDF-38
See merge request espressif/esp-idf!6818
tcp_transport/ws_client: websockets now correctly handle messages longer than buffer
Closes IDF-1084 and IDF-1083
See merge request espressif/esp-idf!6740
transport_ws can now be read multiple times in a row to read frames larger than the buffer.
Added reporting of total payload length and offset to the user in websocket_client.
Added local example test for long messages.
Closes IDF-1083
Added default sdkconfig for qemu build for the mqtt publish example,
Added environment configuration for running the same test on target
or in qemu
Updated missing example tests per latest ttfw refactoring
esp_netif_init() returns standard esp_err_t error code (unlike tcpip_adapter init), so shall be checked for the return value
Also to make the initialization code more consistent.
add support of modbus master ascii
rename base dir name of master and slave example to be mb_slave, mb_master to avoid conflict with sdio/slave example test
add Kconfig option to enable ASCII and RTU mode separately
update ASCII options + remove cast for errors
added baudrate for examples into Kconfig
updated magic numbers for timer timeout
put ascii private definitions into one file
place timer interrupt handler into flash by default;
add default settings for timer and UART interrupts to place them into IRAM into example defaults;
CONFIG_FMB_TIMER_PORT_ENABLED default = n, when enabled, the UART_ISR_IN_IRAM set to y
Previously set to wait until IP address got from tcpip_adapter, but since common example connect code blocks until both IP4 and IPv6 address received it could happen that test code might have started connection to the ASIO counter-part while ESP32 still waiting for IPv6 address
adds timer interrupt handle and free it in vMBXXXPortTimerClose() in master and slave timer port
assign modbus controller interface pointer to NULL in destroy function after free
esp32s2beta: Merge support to master
Closes IDF-513, IDF-756, IDF-758, IDF-999, IDF-753, IDF-749, IDF-754, IDF-840, and IDF-755
See merge request espressif/esp-idf!6100
Testing with predefined buffer sizes for MQTT as well as mbedTLS to
exercise fragmenting outgoing data on both layers. Example test compares
received partition with the actual binary file.
The MQTT broker URL used as default in the examples has ceased operation. All examples and documention have been updated to point to the new domain mqtt.eclipse.org.
This also required an update of the python example test scripts to use TLS 1.2
Fixed error caused by unnecessary reopening of listening socket.
Extracted packet retransmit logic to separate function.
Added robust implementation for sending data
Closes https://github.com/espressif/esp-idf/pull/3597
1) WEB_PATH should path relative to document root of web server.
2) HTTP request should contain "Host" header of format "host:port".
3) Port number in the example should be configurable.
components/coap/port/coap_mbedtls.c:
Add in additional compile time check wrappers for different MbedTLS
configurations.
components/coap/CMakeLists.txt:
components/coap/component.mk:
components/coap/port/coap_notls.c:
components/coap/port/include/coap_config_posix.h:
Add in the ability to compile and run if MbedTLS does not have any TLS
mode enabled.
examples/protocols/coap_client/main/coap_client_example_main.c:
Inform user that MbedTLS Client Mode is required for DTLS if not enabled,
and coaps:// has been requested.
[Lower libcoap library will still error and report this condition]
examples/protocols/coap_server/main/coap_server_example_main.c:
Inform user that MbedTLS Server Mode is required for DTLS if not enabled.
[Lower libcoap library will still error and report this condition]
Closes https://github.com/espressif/esp-idf/issues/3961
Closes https://github.com/espressif/esp-idf/issues/3971
Closes https://github.com/espressif/esp-idf/pull/3977
This MR is intended to fix incorrect parsing of HTTP requests when empty header values are present.
The issue is was due to asymmetric behavior of `http_parser` library, which in case of:
non-empty header values : invokes callbacks with the pointer to the start of a value
empty header values : invokes callbacks with pointer to the start of next header or section
Since HTTP server relies on this pointer (along with length of the value) to locate the end of a value, and replace the line terminators (CRLFs) with null characters, the second case needed to be handled correctly.
Closes IDFGH-1539
Closes https://github.com/espressif/esp-idf/issues/3803
This update supports DTLS, TLS is a future TODO
components/coap/CMakeLists.txt:
components/coap/component.mk:
Add in the new files that have to be built
Replace libcoap/src/coap_notls.c with libcoap/src/coap_mbedtls.c
components/coap/libcoap:
Update the version to include the current version for supporting MbedTLS
components/coap/port/coap_debug.c:
components/coap/port/coap_mbedtls.c:
components/coap/port/include/coap/coap_dtls.h:
New port files for DTLS
components/coap/port/include/coap_config_posix.h:
Include building with MbedTLS
examples/protocols/coap_client/README.md:
examples/protocols/coap_client/main/CMakeLists.txt:
examples/protocols/coap_client/main/Kconfig.projbuild:
examples/protocols/coap_client/main/coap_client_example_main.c:
examples/protocols/coap_client/main/component.mk:
Update CoAP client to support DTLS
examples/protocols/coap_client/main/coap_ca.pem
examples/protocols/coap_client/main/coap_client.crt
examples/protocols/coap_client/main/coap_client.key
New PKI Certs for CoAP client (copied from wpa2_enterprise example)
examples/protocols/coap_server/README.md:
examples/protocols/coap_server/main/CMakeLists.txt:
examples/protocols/coap_server/main/Kconfig.projbuild:
examples/protocols/coap_server/main/coap_server_example_main.c:
examples/protocols/coap_server/main/component.mk:
Update CoAP server to support DTLS
Change "no data" to "Hello World!" to prevent confusion
examples/protocols/coap_server/main/coap_ca.pem
examples/protocols/coap_server/main/coap_server.crt
examples/protocols/coap_server/main/coap_server.key
New PKI Certs for CoAP server (copied from wpa2_enterprise example)
Closes https://github.com/espressif/esp-idf/pull/3345
Closes https://github.com/espressif/esp-idf/issues/1379
The build system automatically determines offsets of partitions from
the partition table, so no manual changes are needed. Instead, add a
note that partition offsets may need to be updated when increasing
the bootloader size.
Dong Heng