1. Removed DHE ciphers when mbedTLS is disabled since they take
too much processing power.
2. Removed support of SHA384 and SHA512 when mbedTLS is disabled
due to too much processing needed.
3. Fixed bugs in crypto_hash_init API which was causing
EAP connections to fail when mbedTLS was enabled.
4. Cleaned some code of crypto_hash_***
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
WPS strict disables workarounds with different APs and may cause
IOT issues. Remove this as default and introduce as a config option.
Also declare esp device as single band mobile device otherwise
WFA sniffer was not able to identify it in the certification setup.
This commit add following crypto changes
1. Update current crypto code with upstream supplicant code
2. Add a proper porting layer to use mbedtls APIs for all the crypto
operations used by supplicant.
Internal crypto will be used when USE_MBEDLTS flag is disabled
in supplicant's menuconfig.
This commit also removes the clutter in crypto files due to partial
porting of some APIs to mbedtls, all the code from those files have
been removed and rewritten in a generic way, this is inspired from
current upstream code.
This also reduces the lib size significantly, supplicant's lib
size reduces around ~567kb after this change(NB: lib size doesn't
indicate reduction in final bin size).
1. Modify DPP Protocol modules for our purpose
2. Add DPP supplicant task and modules to handle DPP frames
3. Add DPP Public API's and definitions for DPP
Flag ESP32_WIFI_ENABLE_WPA3_SAE from Menuconfig is used to
control the stack size required by WPA3. Use the same flag
to compile out the WPA3 code and control the code size.
With this flag disabled code footprint reduces by about 7.7kB
in libwpa_supplicant.a
Update WiFi libs with added checks to cleanly handle disabling
of WPA3 callbacks.
Closes https://github.com/espressif/esp-idf/issues/5971
This commit adds different features from 802.11k and 802.11v
specifications to make the device ready for network assisted
roaming. It also adds initial framework for device to detect
whether it needs to move to a better AP.
Followings are added as part of this.
1. Support for sending neighbor report request and provide
the report back to the APP.
2. Support for beacon measurement report.
3. Support for link measurement report.
4. Support for sending bss transition management query frame
(triggered by the APP).
5. Support for bss transition management request and move
to the candidate based on that.
6. Sending the bss transition management response.
Curretly wpa_supplicant uses internal APIs for RSA operations
which internally uses lots of big num operations.
Big num operations are CPU expensive and can take a lot of time
which can cause watchdog timer to tigger.
This can be optimize by using mbedtls APIs which uses
hardware blocks for big num operations.
To fix this, write new crypto_mbedtls-rsa.c which has APIs
similar to crypto_internal-rsa.c but uses mbedtls APIs.
Add files required for DPP feature from upstream.
These file expose the functionality to create DPP packets.
Ported crypto layer from openssl to mbedtls.
Interfacing to use these API will be added in seperate commit
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
4. Link changes from WiFi library.
Under WPA3-Personal, SAE authentication is used to derive PMK
which is more secure and immune to offline dictionary attacks.
1. Add modules to generate SAE commit/confirm for the handshake
2. Add modules that build and parse SAE data in Auth frames
3. Add WPA3 association and key mgmt definitions
4. Invert y-bit while solving for ECC co-ordinate -
Once an X co-ordinate is obtained, solving for Y co-ordinate
using an elliptical curve equation results in 2 possible values,
Y and (P - Y), where p is the prime number. The co-ordinates are
used for deriving keys in SAE handshake. As par the 802.11 spec
if LSB of X is same as LSB of Y then Y is chosen, (P - Y) otherwise.
This is not what is implemented, so fix this behavior to obtain the
correct Y co-ordinate.
This change ports SAE(Simultaneous Authentication of Equals)
feature from wpa_supplicant and makes it work with mbedtls
crypto APIs. Currently only group 19 is supported. A sample
SAE handshake is included in the testcase. Other minor
changes for DH groups are also included.
1. Add CCMP, AES crypto modules for unicast protected Mgmt frames
2. Add support for computing SHA256 MIC on Bcast Mgmt frames
3. Add support for storing iGTK during 4-way handshake.
4. Provide APIs to MLME for utilizing the SW crypto modules
5. Link PMF changes from WiFi library submodule
1. Add APIs for configuring PMF through set config.
2. Map Supplicant and Wifi Cipher types.
3. Add support for PMF negotiation while generating RSN IE.
1) Added PMK caching module from wpa_supplicant.
2) Modified wpa_sm to
a) Add entry to PMK cache when first time associated to an AP.
b) Maintain entry across the associations.
c) Clear current PMKSA when deauth happens.
d) Search for an entry when re-associating to the same AP and
set it as current PMKSA
e) Wait for msg 1/4 from AP instead of starting EAP authentication.
f) Check PMKID in msg 1 with current PMKSA/cache.
g) Use the cached PMK to complete 4-way handshake.
3) Remove config_bss callback as it was redundant and used to cause
problems for PMK caching flow.
Closes IDF-969
A lot of internally used crypto headers are publicly includeable
in user projects. This leads to bug reports when these headers
are incorrectly used or the API's are not used as intended.
Move all crypto headers into private crypto src folder, also move
crypto_ops into Supplicant to remove dependecy on crypto headers.
Closes IDF-476
wpa_supplicant is using MbedTLS API's for crypto algorithms. For
calling them a duplicate set of modules is maintained prepended
with 'fast_'. Remove these and use flag USE_MBEDTLS_CRYPTO
instead to separate modules calling MbedTLS API's from native
implementation.
Move supplicant to idf and do following refactoring:
1. Make the folder structure consitent with supplicant upstream
2. Remove duplicated header files and minimize the public header files
3. Refactor for WiFi/supplicant interfaces
Do not include bootloader in flash target when secure boot is enabled.
Emit signing warning on all cases where signed apps are enabled (secure
boot and signed images)
Follow convention of capital letters for SECURE_BOOT_SIGNING_KEY
variable, since it is
relevant to other components, not just bootloader.
Pass signing key and verification key via config, not requiring
bootloader to know parent app dir.
Misc. variables name corrections
Shreyas Sheth