tmpsensor: add temp_sensor.h for c3

components/driver/esp32c3/include/driver/temp_sensor.h

@@ -0,0 +1,99 @@
+// Copyright 2010-2018 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#pragma once
+
+#include <stdint.h>
+#include "esp_err.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    TSENS_DAC_L0 = 0, /*!< offset = -2, measure range: 50℃ ~ 125℃, error < 3℃. */
+    TSENS_DAC_L1,     /*!< offset = -1, measure range: 20℃ ~ 100℃, error < 2℃. */
+    TSENS_DAC_L2,     /*!< offset =  0, measure range:-10℃ ~  80℃, error < 1℃. */
+    TSENS_DAC_L3,     /*!< offset =  1, measure range:-30℃ ~  50℃, error < 2℃. */
+    TSENS_DAC_L4,     /*!< offset =  2, measure range:-40℃ ~  20℃, error < 3℃. */
+    TSENS_DAC_MAX,
+    TSENS_DAC_DEFAULT = TSENS_DAC_L2,
+} temp_sensor_dac_offset_t;
+
+/**
+ * @brief Configuration for temperature sensor reading
+ */
+typedef struct {
+    temp_sensor_dac_offset_t dac_offset;    /*!< The temperature measurement range is configured with a built-in temperature offset DAC. */
+    uint8_t clk_div;                        /*!< Default: 6 */
+} temp_sensor_config_t;
+
+#define TSENS_CONFIG_DEFAULT() {.dac_offset = TSENS_DAC_L2, \
+                                .clk_div = 6}
+
+/**
+ * @brief Set parameter of temperature sensor.
+ * @param tsens
+ * @return
+ *     - ESP_OK Success
+ */
+esp_err_t temp_sensor_set_config(temp_sensor_config_t tsens);
+
+/**
+ * @brief Get parameter of temperature sensor.
+ * @param tsens
+ * @return
+ *     - ESP_OK Success
+ */
+esp_err_t temp_sensor_get_config(temp_sensor_config_t *tsens);
+
+/**
+ * @brief Start temperature sensor measure.
+ * @return
+ *     - ESP_OK Success
+ *     - ESP_ERR_INVALID_ARG
+ */
+esp_err_t temp_sensor_start(void);
+
+/**
+ * @brief Stop temperature sensor measure.
+ * @return
+ *     - ESP_OK Success
+ */
+esp_err_t temp_sensor_stop(void);
+
+/**
+ * @brief Read temperature sensor raw data.
+ * @param tsens_out Pointer to raw data, Range: 0 ~ 255
+ * @return
+ *     - ESP_OK Success
+ *     - ESP_ERR_INVALID_ARG `tsens_out` is NULL
+ *     - ESP_ERR_INVALID_STATE temperature sensor dont start
+ */
+esp_err_t temp_sensor_read_raw(uint32_t *tsens_out);
+
+/**
+ * @brief Read temperature sensor data that is converted to degrees Celsius.
+ * @note  Should not be called from interrupt.
+ * @param celsius The measure output value.
+ * @return
+ *     - ESP_OK Success
+ *     - ESP_ERR_INVALID_ARG ARG is NULL.
+ *     - ESP_ERR_INVALID_STATE The ambient temperature is out of range.
+ */
+esp_err_t temp_sensor_read_celsius(float *celsius);
+
+#ifdef __cplusplus
+}
+#endif

components/efuse/src/esp_efuse_utility.c

@@ -68,7 +68,7 @@ esp_err_t esp_efuse_utility_process(const esp_efuse_desc_t* field[], void* ptr,
             if ((bits_counter + num_bits) > req_size) { // Limits the length of the field.
                 num_bits = req_size - bits_counter;
             }
-            ESP_EARLY_LOGD(TAG, "In EFUSE_BLK%d__DATA%d_REG is used %d bits starting with %d bit",
+            ESP_LOGD(TAG, "In EFUSE_BLK%d__DATA%d_REG is used %d bits starting with %d bit",
                     (int)field[i]->efuse_block, num_reg, num_bits, start_bit);
             err = func_proc(num_reg, field[i]->efuse_block, start_bit, num_bits, ptr, &bits_counter);
             ++i_reg;

components/esp_hw_support/port/esp32c3/regi2c_ctrl.h

@@ -45,12 +45,12 @@ extern "C" {
 #define ANA_CONFIG_M    (0x3FF)
 
 #define ANA_I2C_SAR_FORCE_PD BIT(18)
-#define ANA_I2C_BBPLL_M     (BIT(17)) /* Clear to enable BBPLL */
+#define ANA_I2C_BBPLL_M      BIT(17) /* Clear to enable BBPLL */
-#define ANA_I2C_APLL_M      (BIT(14)) /* Clear to enable APLL */
+#define ANA_I2C_APLL_M       BIT(14) /* Clear to enable APLL */
 
 
 #define ANA_CONFIG2_REG  0x6000E048
-#define ANA_CONFIG2_M   (BIT(18))
+#define ANA_CONFIG2_M    BIT(18)
 
 #define ANA_I2C_SAR_FORCE_PU BIT(16)