feat(gdma): set default valid memory range for gdma

components/hal/esp32p4/include/hal/ahb_dma_ll.h

@@ -57,6 +57,18 @@ static inline void ahb_dma_ll_reset_fsm(ahb_dma_dev_t *dev)
     dev->misc_conf.ahbm_rst_inter = 0;
 }
 
+/**
+ * @brief Preset valid memory range for AHB-DMA
+ *
+ * @param dev DMA register base address
+ */
+static inline void ahb_dma_ll_set_default_memory_range(ahb_dma_dev_t *dev)
+{
+    // AHB-DMA can access L2MEM, L2ROM, MSPI Flash, MSPI PSRAM
+    dev->intr_mem_start_addr.val = 0x40000000;
+    dev->intr_mem_end_addr.val = 0x4FFC0000;
+}
+
 ///////////////////////////////////// RX /////////////////////////////////////////
 /**
  * @brief Get DMA RX channel interrupt status word

components/hal/esp32p4/include/hal/axi_dma_ll.h

@@ -59,6 +59,20 @@ static inline void axi_dma_ll_reset_fsm(axi_dma_dev_t *dev)
     dev->misc_conf.axim_rst_wr_inter = 0;
 }
 
+/**
+ * @brief Preset valid memory range for AXI-DMA
+ *
+ * @param dev DMA register base address
+ */
+static inline void axi_dma_ll_set_default_memory_range(axi_dma_dev_t *dev)
+{
+    // AXI-DMA can access L2MEM, L2ROM, MSPI Flash, MSPI PSRAM
+    dev->intr_mem_start_addr.val = 0x4FC00000;
+    dev->intr_mem_end_addr.val = 0x4FFC0000;
+    dev->extr_mem_start_addr.val = 0x40000000;
+    dev->extr_mem_end_addr.val = 0x4C000000;
+}
+
 ///////////////////////////////////// RX /////////////////////////////////////////
 /**
  * @brief Get DMA RX channel interrupt status word

components/hal/gdma_hal_ahb_v2.c

@@ -246,4 +246,5 @@ void gdma_ahb_hal_init(gdma_hal_context_t *hal, const gdma_hal_config_t *config)
 #if SOC_GDMA_SUPPORT_ETM
     hal->enable_etm_task = gdma_ahb_hal_enable_etm_task;
 #endif // SOC_GDMA_SUPPORT_ETM
+    ahb_dma_ll_set_default_memory_range(hal->ahb_dma_dev);
 }

components/hal/gdma_hal_axi.c

@@ -246,4 +246,5 @@ void gdma_axi_hal_init(gdma_hal_context_t *hal, const gdma_hal_config_t *config)
 #if SOC_GDMA_SUPPORT_ETM
     hal->enable_etm_task = gdma_axi_hal_enable_etm_task;
 #endif // SOC_GDMA_SUPPORT_ETM
+    axi_dma_ll_set_default_memory_range(hal->axi_dma_dev);
 }