kopia lustrzana https://github.com/espressif/esp-idf
docs: provide CN translation for api-guides/performance/ram-usage.rst
caixinying-git
rodzic
6bc9a39010
commit
d47457b29b
|
|
@ -21,6 +21,6 @@ Guides
|
|||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
Execution Speed <speed>
|
||||
Binary Size <size>
|
||||
RAM Usage <ram-usage>
|
||||
speed
|
||||
size
|
||||
ram-usage
|
||||
|
|
|
|||
|
|
@ -1,117 +1,133 @@
|
|||
Minimizing RAM Usage
|
||||
====================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
{IDF_TARGET_STATIC_MEANS_HEAP:default="Wi-Fi library, Bluetooth controller", esp32s2="Wi-Fi library", esp32c6="Wi-Fi library, Bluetooth controller, IEEE 802.15.4 library", esp32h2="Bluetooth controller, IEEE 802.15.4 library"}
|
||||
|
||||
In some cases, a firmware application's available RAM may run low or run out entirely. In these cases, it's necessary to tune the memory usage of the firmware application.
|
||||
In some cases, a firmware application's available RAM may run low or run out entirely. In these cases, it is necessary to tune the memory usage of the firmware application.
|
||||
|
||||
In general, firmware should aim to leave some "headroom" of free internal RAM in order to deal with extraordinary situations or changes in RAM usage in future updates.
|
||||
In general, firmware should aim to leave some headroom of free internal RAM to deal with extraordinary situations or changes in RAM usage in future updates.
|
||||
|
||||
Background
|
||||
----------
|
||||
|
||||
Before optimizing ESP-IDF RAM usage, it's necessary to understand the basics of {IDF_TARGET_NAME} memory types, the difference between static and dynamic memory usage in C, and the way ESP-IDF uses stack and heap. This information can all be found in :doc:`/api-reference/system/mem_alloc`.
|
||||
Before optimizing ESP-IDF RAM usage, it is necessary to understand the basics of {IDF_TARGET_NAME} memory types, the difference between static and dynamic memory usage in C, and the way ESP-IDF uses stack and heap. This information can all be found in :doc:`/api-reference/system/mem_alloc`.
|
||||
|
||||
Measuring Static Memory Usage
|
||||
-----------------------------
|
||||
|
||||
The :ref:`idf.py` tool can be used to generate reports about the static memory usage of an application. Refer to :ref:`the Binary Size chapter for more information <idf.py-size>`.
|
||||
The :ref:`idf.py` tool can be used to generate reports about the static memory usage of an application, see :ref:`idf.py-size`.
|
||||
|
||||
Measuring Dynamic Memory Usage
|
||||
------------------------------
|
||||
|
||||
ESP-IDF contains a range of heap APIs for measuring free heap at runtime. See :doc:`/api-reference/system/heap_debug`.
|
||||
ESP-IDF contains a range of heap APIs for measuring free heap at runtime, see :doc:`/api-reference/system/heap_debug`.
|
||||
|
||||
.. note::
|
||||
|
||||
In embedded systems, heap fragmentation can be a significant issue alongside total RAM usage. The heap measurement APIs provide ways to measure the "largest free block". Monitoring this value along with the total number of free bytes can give a quick indication of whether heap fragmentation is becoming an issue.
|
||||
In embedded systems, heap fragmentation can be a significant issue alongside total RAM usage. The heap measurement APIs provide ways to measure the largest free block. Monitoring this value along with the total number of free bytes can give a quick indication of whether heap fragmentation is becoming an issue.
|
||||
|
||||
Reducing Static Memory Usage
|
||||
----------------------------
|
||||
|
||||
- Reducing the static memory usage of the application increases the amount of RAM available for heap at runtime, and vice versa.
|
||||
- Generally speaking, minimizing static memory usage requires monitoring the .data and .bss sizes. For tools to do this, see :ref:`idf.py-size`.
|
||||
- Internal ESP-IDF functions do not make heavy use of static RAM allocation in C. In many instances (including: {IDF_TARGET_STATIC_MEANS_HEAP}) "static" buffers are still allocated from heap, but the allocation is done once when the feature is initialized and will be freed if the feature is deinitialized. This is done in order to maximize the amount of free memory at different points in the application life-cycle.
|
||||
- Generally speaking, minimizing static memory usage requires monitoring the ``.data`` and ``.bss`` sizes. For tools to do this, see :ref:`idf.py-size`.
|
||||
- Internal ESP-IDF functions do not make heavy use of static RAM in C. In many instances (such as {IDF_TARGET_STATIC_MEANS_HEAP}), static buffers are still allocated from the heap. However, the allocation is performed only once during feature initialization and will be freed if the feature is deinitialized. This approach is adopted to optimize the availability of free memory at various stages of the application's life cycle.
|
||||
|
||||
To minimize static memory use:
|
||||
|
||||
.. list::
|
||||
|
||||
- Declare structures, buffers, or other variables ``const`` whenever possible. Constant data can be stored in flash not RAM. This may require changing functions in the firmware to take ``const *`` arguments instead of mutable pointer arguments. These changes can also reduce the stack usage of some functions.
|
||||
:SOC_BT_SUPPORTED: - If using Bluedroid, setting the option :ref:`CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY` will cause Bluedroid to allocate memory on initialization and free it on deinitialization. This doesn't necessarily reduce the peak memory usage, but changes it from static memory usage to runtime memory usage.
|
||||
- If :doc:`Coredump </api-guides/core_dump>` component is enabled, `ESP_COREDUMP_LOG` macros will use ~5KB internal memory to place strings into DRAM. By disabling :ref:`CONFIG_ESP_COREDUMP_LOGS` option, these logs are disabled and the memory is reclaimed.
|
||||
- Constant data can be stored in flash memory instead of RAM, thus it is recommended to declare structures, buffers, or other variables as ``const``. This approach may require modifying firmware functions to accept ``const *`` arguments instead of mutable pointer arguments. These changes can also help reduce the stack usage of certain functions.
|
||||
:SOC_BT_SUPPORTED: - If using Bluedroid, setting the option :ref:`CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY` will cause Bluedroid to allocate memory on initialization and free it on deinitialization. This does not necessarily reduce the peak memory usage, but changes it from static memory usage to runtime memory usage.
|
||||
|
||||
.. _optimize-stack-sizes:
|
||||
|
||||
Reducing Stack Sizes
|
||||
--------------------
|
||||
|
||||
In FreeRTOS, task stacks are usually allocated from the heap. The stack size for each task is fixed (passed as an argument to :cpp:func:`xTaskCreate`). Each task can use up to its allocated stack size, but using more than this will cause an otherwise valid program to crash with a stack overflow or heap corruption.
|
||||
In FreeRTOS, task stacks are usually allocated from the heap. The stack size for each task is fixed and passed as an argument to :cpp:func:`xTaskCreate`. Each task can use up to its allocated stack size, but using more than this will cause an otherwise valid program to crash, with a stack overflow or heap corruption.
|
||||
|
||||
Therefore, determining the optimum sizes of each task stack can substantially reduce RAM usage.
|
||||
Therefore, determining the optimum sizes of each task stack, minimizing the required size of each task stack, and minimizing the number of task stacks as whole, can all substantially reduce RAM usage.
|
||||
|
||||
To determine optimum task stack sizes:
|
||||
To determine the optimum size for a particular task stack, users can consider the following methods:
|
||||
|
||||
- Combine tasks. The best task stack size is 0 bytes, achieved by combining a task with another existing task. Anywhere that the firmware can be structured to perform multiple functions sequentially in a single task will increase free memory. In some cases, using a "worker task" pattern where jobs are serialized into a FreeRTOS queue (or similar) and then processed by generic worker tasks may help.
|
||||
- Consolidate task functions. String formatting functions (like ``printf``) are particularly heavy users of stack, so any task which doesn't ever call these can usually have its stack size reduced.
|
||||
- Enabling :ref:`newlib-nano-formatting` will reduce the stack usage of any task that calls ``printf()`` or other C string formatting functions.
|
||||
- Avoid allocating large variables on the stack. In C, any large struct or array allocated as an "automatic" variable (i.e. default scope of a C declaration) will use space on the stack. Minimize the sizes of these, allocate them statically and/or see if you can save memory by allocating them from the heap only when they are needed.
|
||||
- Avoid deep recursive function calls. Individual recursive function calls don't always add a lot of stack usage each time they are called, but if each function includes large stack-based variables then the overhead can get quite high.
|
||||
- At runtime, call the function :cpp:func:`uxTaskGetStackHighWaterMark` with the handle of any task where you think there is unused stack memory. This function returns the minimum lifetime free stack memory in bytes. The easiest time to call this is from the task itself: call ``uxTaskGetStackHighWaterMark(NULL)`` to get the current task's high water mark after the time that the task has achieved its peak stack usage (i.e. if there is a main loop, execute the main loop a number of times with all possible states and then call :cpp:func:`uxTaskGetStackHighWaterMark`). Often, it's possible to subtract almost the entire value returned here from the total stack size of a task, but allow some safety margin to account for unexpected small increases in stack usage at runtime.
|
||||
- Call :cpp:func:`uxTaskGetSystemState` at runtime to get a summary of all tasks in the system. This includes their individual stack "high watermark" values.
|
||||
- When debugger watchpoints are not being used, set the :ref:`CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK` option to trigger an immediate panic if a task writes the word at the end of its assigned stack. This is slightly more reliable than the default :ref:`CONFIG_FREERTOS_CHECK_STACKOVERFLOW` option of "Check using canary bytes", because the panic happens immediately, not on the next RTOS context switch. Neither option is perfect, it's possible in some cases for stack pointer to skip the watchpoint or canary bytes and corrupt another region of RAM, instead.
|
||||
- At runtime, call the function :cpp:func:`uxTaskGetStackHighWaterMark` with the handle of any task where you think there is unused stack memory. This function returns the minimum lifetime free stack memory in bytes.
|
||||
|
||||
Internal Stack Sizes
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
- The easiest time to call :cpp:func:`uxTaskGetStackHighWaterMark` is from the task itself: call ``uxTaskGetStackHighWaterMark(NULL)`` to get the current task's high water mark after the time that the task has achieved its peak stack usage, i.e., if there is a main loop, execute the main loop a number of times with all possible states, and then call :cpp:func:`uxTaskGetStackHighWaterMark`.
|
||||
- Often, it is possible to subtract almost the entire value returned here from the total stack size of a task, but allow some safety margin to account for unexpected small increases in stack usage at runtime.
|
||||
|
||||
- Call :cpp:func:`uxTaskGetSystemState` at runtime to get a summary of all tasks in the system. This includes their individual stack high watermark values.
|
||||
- When debugger watchpoints are not being used, users can set the :ref:`CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK` option. This will cause one of the watchpoints to watch the last word of the task's stack. If that word is overwritten (such as in a stack overflow), a panic is triggered immediately. This is slightly more reliable than the default :ref:`CONFIG_FREERTOS_CHECK_STACKOVERFLOW` option of ``Check using canary bytes``, because the panic happens immediately, rather than on the next RTOS context switch. Neither option is perfect. In some cases, it is possible that the stack pointer skips the watchpoint or canary bytes and corrupts another region of RAM instead.
|
||||
|
||||
To reduce the required size of a particular task stack, users can consider the following methods:
|
||||
|
||||
- Avoid stack heavy functions. String formatting functions (like ``printf()``) are particularly heavy users of the stack, so any task which does not ever call these can usually have its stack size reduced.
|
||||
|
||||
- Enabling :ref:`newlib-nano-formatting` reduces the stack usage of any task that calls ``printf()`` or other C string formatting functions.
|
||||
|
||||
- Avoid allocating large variables on the stack. In C, any large structures or arrays allocated as an automatic variable (i.e., default scope of a C declaration) uses space on the stack. To minimize the sizes of these, allocate them statically and/or see if you can save memory by dynamically allocating them from the heap only when they are needed.
|
||||
- Avoid deep recursive function calls. Individual recursive function calls do not always add a lot of stack usage each time they are called, but if each function includes large stack-based variables then the overhead can get quite high.
|
||||
|
||||
To reduce the total number of tasks, users can consider the following method:
|
||||
|
||||
- Combine tasks. If a particular task is never created, the task's stack is never allocated, thus reducing RAM usage significantly. Unnecessary tasks can typically be removed if those tasks can be combined with another task. In an application, tasks can typically be combined or removed if:
|
||||
|
||||
- The work done by the tasks can be structured into multiple functions that are called sequentially.
|
||||
- The work done by the tasks can be structured into smaller jobs that are serialized (via a FreeRTOS queue or similar) for execution by a worker task.
|
||||
|
||||
Internal Task Stack Sizes
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
ESP-IDF allocates a number of internal tasks for housekeeping purposes or operating system functions. Some are created during the startup process, and some are created at runtime when particular features are initialized.
|
||||
|
||||
The default stack sizes for these tasks are usually set conservatively high, to allow all common usage patterns. Many of the stack sizes are configurable, and it may be possible to reduce them to match the real runtime stack usage of the task.
|
||||
The default stack sizes for these tasks are usually set conservatively high to allow all common usage patterns. Many of the stack sizes are configurable, and it may be possible to reduce them to match the real runtime stack usage of the task.
|
||||
|
||||
.. important::
|
||||
|
||||
If internal task stack sizes are set too small, ESP-IDF will crash unpredictably. Even if the root cause is task stack overflow, this is not always clear when debugging. It is recommended that internal stack sizes are only reduced carefully (if at all), with close attention to "high water mark" free space under load. If reporting an issue that occurs when internal task stack sizes have been reduced, please always include this information and the specific configuration that is being used.
|
||||
If internal task stack sizes are set too small, ESP-IDF will crash unpredictably. Even if the root cause is task stack overflow, this is not always clear when debugging. It is recommended that internal stack sizes are only reduced carefully (if at all), with close attention to high water mark free space under load. If reporting an issue that occurs when internal task stack sizes have been reduced, please always include the following information and the specific configuration that is being used.
|
||||
|
||||
.. list::
|
||||
|
||||
- :ref:`Main task that executes app_main function <app-main-task>` has stack size :ref:`CONFIG_ESP_MAIN_TASK_STACK_SIZE`.
|
||||
- :ref:`app-main-task` has stack size :ref:`CONFIG_ESP_MAIN_TASK_STACK_SIZE`.
|
||||
- :doc:`/api-reference/system/esp_timer` system task which executes callbacks has stack size :ref:`CONFIG_ESP_TIMER_TASK_STACK_SIZE`.
|
||||
- FreeRTOS Timer Task to handle FreeRTOS timer callbacks has stack size :ref:`CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH`.
|
||||
- :doc:`/api-reference/system/esp_event` system task to execute callbacks for the default system event loop has stack size :ref:`CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE`.
|
||||
- :doc:`/api-guides/lwip` TCP/IP task has stack size :ref:`CONFIG_LWIP_TCPIP_TASK_STACK_SIZE`
|
||||
:SOC_BT_SUPPORTED: - :doc:`Bluedroid Bluetooth Host </api-reference/bluetooth/index>` have task stack sizes :ref:`CONFIG_BT_BTC_TASK_STACK_SIZE`, :ref:`CONFIG_BT_BTU_TASK_STACK_SIZE`.
|
||||
:SOC_BT_SUPPORTED: - :doc:`NimBLE Bluetooth Host </api-reference/bluetooth/nimble/index>` has task stack size :ref:`CONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE`
|
||||
- :doc:`/api-guides/lwip` TCP/IP task has stack size :ref:`CONFIG_LWIP_TCPIP_TASK_STACK_SIZE`.
|
||||
:SOC_BT_SUPPORTED: - :doc:`/api-reference/bluetooth/index` have task stack sizes :ref:`CONFIG_BT_BTC_TASK_STACK_SIZE`, :ref:`CONFIG_BT_BTU_TASK_STACK_SIZE`.
|
||||
:SOC_BT_SUPPORTED: - :doc:`/api-reference/bluetooth/nimble/index` has task stack size :ref:`CONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE`.
|
||||
- The Ethernet driver creates a task for the MAC to receive Ethernet frames. If using the default config ``ETH_MAC_DEFAULT_CONFIG`` then the task stack size is 4 KB. This setting can be changed by passing a custom :cpp:class:`eth_mac_config_t` struct when initializing the Ethernet MAC.
|
||||
- FreeRTOS idle task stack size is configured by :ref:`CONFIG_FREERTOS_IDLE_TASK_STACKSIZE`.
|
||||
- If using the :doc:`MQTT </api-reference/protocols/mqtt>` component, it creates a task with stack size configured by :ref:`CONFIG_MQTT_TASK_STACK_SIZE`. MQTT stack size can also be configured using ``task_stack`` field of :cpp:class:`esp_mqtt_client_config_t`.
|
||||
- To see how to optimize RAM usage when using ``mDNS``, please check `Performance Optimization <https://docs.espressif.com/projects/esp-protocols/mdns/docs/latest/en/index.html#minimizing-ram-usage>`__.
|
||||
- If using the :doc:`/api-reference/protocols/mqtt` component, it creates a task with stack size configured by :ref:`CONFIG_MQTT_TASK_STACK_SIZE`. MQTT stack size can also be configured using ``task_stack`` field of :cpp:class:`esp_mqtt_client_config_t`.
|
||||
- To see how to optimize RAM usage when using ``mDNS``, please check `Minimizing RAM Usage <https://docs.espressif.com/projects/esp-protocols/mdns/docs/latest/en/index.html#minimizing-ram-usage>`__.
|
||||
|
||||
.. note::
|
||||
|
||||
Aside from built-in system features such as esp-timer, if an ESP-IDF feature is not initialized by the firmware then no associated task is created. In those cases, the stack usage is zero and the stack size configuration for the task is not relevant.
|
||||
Aside from built-in system features such as ESP-timer, if an ESP-IDF feature is not initialized by the firmware, then no associated task is created. In those cases, the stack usage is zero, and the stack-size configuration for the task is not relevant.
|
||||
|
||||
Reducing Heap Usage
|
||||
-------------------
|
||||
|
||||
For functions that assist in analyzing heap usage at runtime, see :doc:`/api-reference/system/heap_debug`.
|
||||
|
||||
Normally, optimizing heap usage consists of analyzing the usage and removing calls to ``malloc()`` that aren't being used, reducing the corresponding sizes, or freeing previously allocated buffers earlier.
|
||||
Normally, optimizing heap usage consists of analyzing the usage and removing calls to ``malloc()`` that are not being used, reducing the corresponding sizes, or freeing previously allocated buffers earlier.
|
||||
|
||||
There are some ESP-IDF configuration options that can reduce heap usage at runtime:
|
||||
|
||||
.. list::
|
||||
|
||||
- lwIP documentation has a section to configure :ref:`lwip-ram-usage`.
|
||||
:SOC_WIFI_SUPPORTED: - :ref:`wifi-buffer-usage` describes options to either reduce numbers of "static" buffers or reduce the maximum number of "dynamic" buffers in use, in order to minimize memory usage at possible cost of performance. Note that "static" Wi-Fi buffers are still allocated from heap when Wi-Fi is initialized and will be freed if Wi-Fi is deinitialized.
|
||||
:SOC_WIFI_SUPPORTED: - :ref:`wifi-buffer-usage` describes options to either reduce the number of static buffers or reduce the maximum number of dynamic buffers in use, so as to minimize memory usage at a possible cost of performance. Note that static Wi-Fi buffers are still allocated from the heap when Wi-Fi is initialized, and will be freed if Wi-Fi is deinitialized.
|
||||
:esp32: - The Ethernet driver allocates DMA buffers for the internal Ethernet MAC when it is initialized - configuration options are :ref:`CONFIG_ETH_DMA_BUFFER_SIZE`, :ref:`CONFIG_ETH_DMA_RX_BUFFER_NUM`, :ref:`CONFIG_ETH_DMA_TX_BUFFER_NUM`.
|
||||
- Several Mbed TLS configuration options can be used to reduce heap memory usage. See the :ref:`Mbed TLS <reducing_ram_usage_mbedtls>` docs for details.
|
||||
:esp32: - In single core mode only, it's possible to use IRAM as byte accessible memory (added to the regular heap) by enabling :ref:`CONFIG_ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY`. Note that this option carries a performance penalty and the risk of security issues caused by executable data. If this option is enabled then it's possible to set other options to prefer certain buffers be allocated from this memory: :ref:`mbedTLS <CONFIG_MBEDTLS_MEM_ALLOC_MODE>`, :ref:`NimBLE <CONFIG_BT_NIMBLE_MEM_ALLOC_MODE>`.
|
||||
:esp32: - Reduce :ref:`CONFIG_BTDM_CTRL_BLE_MAX_CONN` if using BLE.
|
||||
- Several Mbed TLS configuration options can be used to reduce heap memory usage. See the :ref:`reducing_ram_usage_mbedtls` docs for details.
|
||||
:esp32: - In single-core mode only, it is possible to use IRAM as byte-accessible memory added to the regular heap by enabling :ref:`CONFIG_ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY`. Note that this option carries a performance penalty, and the risk of security issues caused by executable data. If this option is enabled, then it is possible to set other options to prefer certain buffers allocated from this memory: :ref:`CONFIG_MBEDTLS_MEM_ALLOC_MODE`, :ref:`NimBLE <CONFIG_BT_NIMBLE_MEM_ALLOC_MODE>`.
|
||||
:esp32: - Reduce :ref:`CONFIG_BTDM_CTRL_BLE_MAX_CONN` if using Bluetooth LE.
|
||||
:esp32: - Reduce :ref:`CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN` if using Bluetooth Classic.
|
||||
|
||||
.. note::
|
||||
|
||||
There are other configuration options that will increase heap usage at runtime if changed from the defaults. These are not listed here, but the help text for the configuration item will mention if there is some memory impact.
|
||||
There are other configuration options that increases heap usage at runtime if changed from the defaults. These options are not listed above, but the help text for the configuration item will mention if there is some memory impact.
|
||||
|
||||
.. _optimize-iram-usage:
|
||||
|
||||
|
|
@ -120,9 +136,9 @@ Optimizing IRAM Usage
|
|||
|
||||
.. only:: not esp32
|
||||
|
||||
The available DRAM at runtime (for heap usage) is also reduced by the static IRAM usage. Therefore, one way to increase available DRAM is to reduce IRAM usage.
|
||||
The available DRAM at runtime for heap usage is also reduced by the static IRAM usage. Therefore, one way to increase available DRAM is to reduce IRAM usage.
|
||||
|
||||
If the app allocates more static IRAM than is available then the app will fail to build and linker errors such as ``section `.iram0.text' will not fit in region `iram0_0_seg'``, ``IRAM0 segment data does not fit`` and ``region `iram0_0_seg' overflowed by 84 bytes`` will be seen. If this happens, it is necessary to find ways to reduce static IRAM usage in order to link the application.
|
||||
If the app allocates more static IRAM than available, then the app will fail to build, and linker errors such as ``section '.iram0.text' will not fit in region 'iram0_0_seg'``, ``IRAM0 segment data does not fit``, and ``region 'iram0_0_seg' overflowed by 84-bytes`` will be seen. If this happens, it is necessary to find ways to reduce static IRAM usage in order to link the application.
|
||||
|
||||
To analyze the IRAM usage in the firmware binary, use :ref:`idf.py-size`. If the firmware failed to link, steps to analyze are shown at :ref:`idf-size-linker-failed`.
|
||||
|
||||
|
|
@ -130,31 +146,31 @@ The following options will reduce IRAM usage of some ESP-IDF features:
|
|||
|
||||
.. list::
|
||||
|
||||
- Enable :ref:`CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH`. Provided these functions are not (incorrectly) used from ISRs, this option is safe to enable in all configurations.
|
||||
- Enable :ref:`CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH`. Enabling this option will place snapshot-related functions, such as ``vTaskGetSnapshot`` or ``uxTaskGetSnapshotAll``, in flash.
|
||||
- Enable :ref:`CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH`. Provided these functions are not (incorrectly) used from ISRs, this option is safe to enable in all configurations.
|
||||
- Enable :ref:`CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH`. This option is not safe to use if the ISR ringbuf functions are used from an IRAM interrupt context, e.g. if :ref:`CONFIG_UART_ISR_IN_IRAM` is enabled. For the IDF drivers where this is the case you will get an error at run-time when installing the driver in question.
|
||||
:SOC_WIFI_SUPPORTED: - Disable Wi-Fi options :ref:`CONFIG_ESP_WIFI_IRAM_OPT` and/or :ref:`CONFIG_ESP_WIFI_RX_IRAM_OPT`. Disabling these options will free available IRAM at the cost of Wi-Fi performance.
|
||||
:CONFIG_ESP_ROM_HAS_SPI_FLASH: - :ref:`CONFIG_SPI_FLASH_ROM_IMPL` enabling this option will free some IRAM but will mean that esp_flash bugfixes and new flash chip support is not available, see :doc:`/api-reference/peripherals/spi_flash/spi_flash_idf_vs_rom` for details.
|
||||
:esp32: - :ref:`CONFIG_SPI_FLASH_ROM_DRIVER_PATCH` disabling this option will free some IRAM but is only available in some flash configurations (see the configuration item help text).
|
||||
:esp32: - If the application uses PSRAM and is based on ESP32 rev. 3 (ECO3), setting :ref:`CONFIG_ESP32_REV_MIN` to ``3`` will disable PSRAM bug workarounds, saving ~10kB or more of IRAM.
|
||||
- Disabling :ref:`CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR` prevents posting ``esp_event`` events from :ref:`iram-safe-interrupt-handlers` but will save some IRAM.
|
||||
- Disabling :ref:`CONFIG_SPI_MASTER_ISR_IN_IRAM` prevents spi_master interrupts from being serviced while writing to flash, and may otherwise reduce spi_master performance, but will save some IRAM.
|
||||
- Disabling :ref:`CONFIG_SPI_SLAVE_ISR_IN_IRAM` prevents spi_slave interrupts from being serviced while writing to flash, will save some IRAM.
|
||||
- Setting :ref:`CONFIG_HAL_DEFAULT_ASSERTION_LEVEL` to disable assertion for HAL component will save some IRAM especially for HAL code who calls `HAL_ASSERT` a lot and resides in IRAM.
|
||||
- Refer to sdkconfig menu ``Auto-detect flash chips`` and you can disable flash drivers which you don't need to save some IRAM.
|
||||
- Enable :ref:`CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH`. Provided that :ref:`CONFIG_SPI_MASTER_ISR_IN_IRAM` is not enabled and the heap functions are not (incorrectly) used from ISRs, this option is safe to enable in all configuration.
|
||||
- Enable :ref:`CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH`. Provided these functions are not incorrectly used from ISRs, this option is safe to enable in all configurations.
|
||||
- Enable :ref:`CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH`. Enabling this option places snapshot-related functions, such as ``vTaskGetSnapshot`` or ``uxTaskGetSnapshotAll``, in flash.
|
||||
- Enable :ref:`CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH`. Provided these functions are not incorrectly used from ISRs, this option is safe to enable in all configurations.
|
||||
- Enable :ref:`CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH`. This option is not safe to use if the ISR ringbuf functions are used from an IRAM interrupt context, e.g., if :ref:`CONFIG_UART_ISR_IN_IRAM` is enabled. For the ESP-IDF drivers where this is the case, you can get an error at run-time when installing the driver in question.
|
||||
:SOC_WIFI_SUPPORTED: - Disabling Wi-Fi options :ref:`CONFIG_ESP_WIFI_IRAM_OPT` and/or :ref:`CONFIG_ESP_WIFI_RX_IRAM_OPT` options frees available IRAM at the cost of Wi-Fi performance.
|
||||
:CONFIG_ESP_ROM_HAS_SPI_FLASH: - Enabling :ref:`CONFIG_SPI_FLASH_ROM_IMPL` frees some IRAM but means that esp_flash bugfixes and new flash chip support are not available, see :doc:`/api-reference/peripherals/spi_flash/spi_flash_idf_vs_rom` for details.
|
||||
:esp32: - Disabling :ref:`CONFIG_SPI_FLASH_ROM_DRIVER_PATCH` frees some IRAM but is only available in some flash configurations, see the configuration item help text.
|
||||
:esp32: - If the application uses PSRAM and is based on ESP32 rev. 3 (ECO3), setting :ref:`CONFIG_ESP32_REV_MIN` to ``3`` disables PSRAM bug workarounds, saving 10 KB or more of IRAM.
|
||||
- Disabling :ref:`CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR` prevents posting ``esp_event`` events from :ref:`iram-safe-interrupt-handlers` but saves some IRAM.
|
||||
- Disabling :ref:`CONFIG_SPI_MASTER_ISR_IN_IRAM` prevents spi_master interrupts from being serviced while writing to flash, and may otherwise reduce spi_master performance, but saves some IRAM.
|
||||
- Disabling :ref:`CONFIG_SPI_SLAVE_ISR_IN_IRAM` prevents spi_slave interrupts from being serviced while writing to flash, which saves some IRAM.
|
||||
- Setting :ref:`CONFIG_HAL_DEFAULT_ASSERTION_LEVEL` to disable assertion for HAL component saves some IRAM, especially for HAL code who calls ``HAL_ASSERT`` a lot and resides in IRAM.
|
||||
- Refer to the sdkconfig menu ``Auto-detect Flash chips``, and you can disable flash drivers which you do not need to save some IRAM.
|
||||
- Enable :ref:`CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH`. Provided that :ref:`CONFIG_SPI_MASTER_ISR_IN_IRAM` is not enabled and the heap functions are not incorrectly used from ISRs, this option is safe to enable in all configurations.
|
||||
|
||||
.. only:: esp32
|
||||
|
||||
Using SRAM1 for IRAM
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The SRAM1 memory area is normally used for DRAM, but it is possible to use parts of it for IRAM with :ref:`CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM`. This memory would previously be reserved for DRAM data usage (e.g. bss) by the software bootloader and later added to the heap. After this option was introduced, the bootloader DRAM size was reduced to a value closer to what it normally actually needs.
|
||||
The SRAM1 memory area is normally used for DRAM, but it is possible to use parts of it for IRAM with :ref:`CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM`. This memory would previously be reserved for DRAM data usage (e.g., ``.bss``) by the software bootloader and later added to the heap. After this option was introduced, the bootloader DRAM size was reduced to a value closer to what it normally actually needs.
|
||||
|
||||
This option depends on IDF being able to recognize that the new SRAM1 area is also a valid load address for an image segment. If the software bootloader was compiled before this option existed, then the bootloader will not be able to load an app which has code placed in this new extended IRAM area. This would typically happen if you are doing an OTA update, where only the app would be updated.
|
||||
To use this option, ESP-IDF should be able to recognize that the new SRAM1 area is also a valid load address for an image segment. If the software bootloader was compiled before this option existed, then the bootloader will not be able to load the app that has code placed in this new extended IRAM area. This would typically happen if you are doing an OTA update, where only the app would be updated.
|
||||
|
||||
If the IRAM section were to be placed in an invalid area then this would be detected during the bootup process and result in a failed boot:
|
||||
If the IRAM section were to be placed in an invalid area, then this would be detected during the bootup process, and result in a failed boot:
|
||||
|
||||
.. code-block:: text
|
||||
|
||||
|
|
@ -162,26 +178,27 @@ The following options will reduce IRAM usage of some ESP-IDF features:
|
|||
|
||||
.. warning::
|
||||
|
||||
Apps compiled with :ref:`CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM`, may fail to boot if used together with a software bootloader compiled before this config option was introduced. If you are using an older bootloader and updating over OTA, please test carefully before pushing any update.
|
||||
Apps compiled with :ref:`CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM` may fail to boot, if used together with a software bootloader that was compiled before this config option was introduced. If you are using an older bootloader and updating over OTA, please test carefully before pushing any updates.
|
||||
|
||||
Any memory which ends up not being used for static IRAM will be added to the heap.
|
||||
Any memory that ends up unused for static IRAM will be added to the heap.
|
||||
|
||||
.. only:: esp32c3
|
||||
|
||||
Flash Suspend Feature
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
When using ESP Flash APIs and other APIs based on the former (NVS, Partition APIs, etc.), the Cache will be disabled. During this period of time, any code executed must reside in internal RAM (see :ref:`concurrency-constraints-flash`). Hence, interrupt handlers that are not in internal RAM will not be executed.
|
||||
When using SPI flash driver API and other APIs based on the former (NVS, Partition APIs, etc.), the Cache will be disabled. During this period, any code executed must reside in internal RAM, see :ref:`concurrency-constraints-flash`. Hence, interrupt handlers that are not in internal RAM will not be executed.
|
||||
|
||||
To achieve this, ESP-IDF Drivers usually have the following two options:
|
||||
- an option to place the driver's internal ISR handler in internal RAM
|
||||
- an option to place some control functions in internal RAM.
|
||||
To achieve this, ESP-IDF drivers usually have the following two options:
|
||||
|
||||
User ISR callbacks (and involved variables) have to be in internal RAM if they are also used in interrupt contexts.
|
||||
- Place the driver's internal ISR handler in the internal RAM.
|
||||
- Place some control functions in the internal RAM.
|
||||
|
||||
Placing additional code into IRAM will exacerbate the IRAM usage. For this reason, there is :ref:`CONFIG_SPI_FLASH_AUTO_SUSPEND`, which can alleviate the aforementioned kinds of IRAM usage. By enabling this feature, cache won't be disabled when ESP Flash and ESP-Flash-based APIs are used. Therefore, code and data in Flash can be executed or accessed normally, but with some minor delay. See :ref:`Flash Auto Suspend <auto-suspend>` for more details about this feature.
|
||||
User ISR callbacks and involved variables have to be in internal RAM if they are also used in interrupt contexts.
|
||||
|
||||
Regarding the flash suspend feature usage, and corresponding response time delay, please also see this example :example:`system/flash_suspend` .
|
||||
Placing additional code into IRAM will exacerbate IRAM usage. For this reason, there is :ref:`CONFIG_SPI_FLASH_AUTO_SUSPEND`, which can alleviate the aforementioned kinds of IRAM usage. By enabling this feature, the Cache will not be disabled when SPI flash driver APIs and SPI flash driver-based APIs are used. Therefore, code and data in flash can be executed or accessed normally, but with some minor delay. See :ref:`auto-suspend` for more details about this feature.
|
||||
|
||||
Regarding the flash suspend feature usage, and corresponding response time delay, please also see this example :example:`system/flash_suspend`.
|
||||
|
||||
|
||||
.. only:: esp32
|
||||
|
|
@ -189,7 +206,7 @@ The following options will reduce IRAM usage of some ESP-IDF features:
|
|||
Putting C Library in Flash
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
When compiling for ESP32 revisions older than ECO3 (:ref:`CONFIG_ESP32_REV_MIN`), PSRAM cache bug workaround (:ref:`CONFIG_SPIRAM_CACHE_WORKAROUND`) option is enabled, and the C library functions normally located in ROM are recompiled with the workaround and placed into IRAM instead. For most applications, it is safe to move many of the C library functions into Flash, reclaiming some IRAM. Corresponding options include:
|
||||
When compiling for ESP32 revisions older than ECO3 (:ref:`CONFIG_ESP32_REV_MIN`), the PSRAM Cache bug workaround (:ref:`CONFIG_SPIRAM_CACHE_WORKAROUND`) option is enabled, and the C library functions normally located in ROM are recompiled with the workaround and placed into IRAM instead. For most applications, it is safe to move many of the C library functions into flash, reclaiming some IRAM. Corresponding options include:
|
||||
|
||||
.. list::
|
||||
|
||||
|
|
@ -203,10 +220,10 @@ The following options will reduce IRAM usage of some ESP-IDF features:
|
|||
- :ref:`CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM`: affects the functions ``strcasecmp``, ``strcasestr``, ``strchr``, ``strcoll``, ``strcpy``, ``strcspn``, ``strdup``, ``strdup_r``, ``strlcat``, ``strlcpy``, ``strlen``, ``strlwr``, ``strncasecmp``, ``strncat``, ``strncmp``, ``strncpy``, ``strndup``, ``strndup_r``, ``strrchr``, ``strsep``, ``strspn``, ``strstr``, ``strtok_r, and ``strupr``.
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM`: affects the functions ``srand``, ``rand``, and ``rand_r``.
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM`: affects the functions ``environ``, ``envlock``, and ``getenv_r``.
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM`: affects the functions lock``, ``isatty``, ``fclose``, ``open``, ``close``, ``creat``, ``read``, ``rshift``, ``sbrk``, ``stdio``, ``syssbrk``, ``sysclose``, ``sysopen``, ``creat``, ``sysread``, ``syswrite``, ``impure``, ``fwalk``, and ``findfp``.
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM`: affects the functions ``lock``, ``isatty``, ``fclose``, ``open``, ``close``, ``creat``, ``read``, ``rshift``, ``sbrk``, ``stdio``, ``syssbrk``, ``sysclose``, ``sysopen``, ``creat``, ``sysread``, ``syswrite``, ``impure``, ``fwalk``, and ``findfp``.
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM`: affects the functions ``raise`` and ``system``.
|
||||
|
||||
The exact amount of IRAM saved will depend on how much C library code is actually used by the application. In addition to these, the following options may be used to move more of the C library code into Flash, however note that this may result in reduced performance. Also take care to not use corresponding C library functions from interrupts which may be called while cache is disabled (allocated with :c:macro:`ESP_INTR_FLAG_IRAM` flag), refer to :ref:`iram-safe-interrupt-handlers` for more details. For these reasons, the functions ``itoa``, ``memcmp``, ``memcpy``, ``memset``, ``strcat``, ``strcmp``, and ``strlen`` are always put in IRAM.
|
||||
The exact amount of IRAM saved will depend on how much C library code is actually used by the application. In addition, the following options may be used to move more of the C library code into flash, however note that this may result in reduced performance. Be careful not to use the C library function allocated with :c:macro:`ESP_INTR_FLAG_IRAM` flag from interrupts when cache is disabled, refer to :ref:`iram-safe-interrupt-handlers` for more details. For these reasons, the functions ``itoa``, ``memcmp``, ``memcpy``, ``memset``, ``strcat``, ``strcmp``, and ``strlen`` are always put in IRAM.
|
||||
|
||||
.. note::
|
||||
|
||||
|
|
|
|||
|
|
@ -21,6 +21,6 @@ ESP-IDF 预设了默认设置，旨在在性能、资源使用和可用功能之
|
|||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
执行速度 <speed>
|
||||
二进制文件大小 <size>
|
||||
内存使用 <ram-usage>
|
||||
speed
|
||||
size
|
||||
ram-usage
|
||||
|
|
|
|||
|
|
@ -1,2 +1,234 @@
|
|||
.. include:: ../../../en/api-guides/performance/ram-usage.rst
|
||||
内存优化
|
||||
====================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
{IDF_TARGET_STATIC_MEANS_HEAP:default="Wi-Fi 库和蓝牙控制器", esp32s2="Wi-Fi 库", esp32c6="Wi-Fi 库、蓝牙控制器和 IEEE 802.15.4 库", esp32h2="蓝牙控制器，IEEE 802.15.4 库"}
|
||||
|
||||
固件应用程序的可用 RAM 在某些情况下可能处于低水平，甚至完全耗尽。为此，应调整这些情况下固件应用程序的内存使用情况。
|
||||
|
||||
固件应用程序通常需要为内部 RAM 保留备用空间，用于应对非常规情况，或在后续版本的更新中，适应 RAM 使用需求的变化。
|
||||
|
||||
背景
|
||||
----------
|
||||
|
||||
在进行 ESP-IDF 的内存优化前，应了解有关 {IDF_TARGET_NAME} 内存类型的基础知识、C 语言中静态和动态内存使用的区别、以及 ESP-IDF 中栈和堆的使用方式。以上信息均可参阅 :doc:`/api-reference/system/mem_alloc`。
|
||||
|
||||
测量静态内存使用情况
|
||||
-----------------------------
|
||||
|
||||
:ref:`idf.py` 工具可用于生成应用程序静态内存的使用情况报告，请参阅 :ref:`idf.py-size`。
|
||||
|
||||
测量动态内存使用情况
|
||||
------------------------------
|
||||
|
||||
ESP-IDF 包含一系列堆 API，可以在运行时测量空闲堆内存，请参阅 :doc:`/api-reference/system/heap_debug`。
|
||||
|
||||
.. note::
|
||||
|
||||
在嵌入式系统中，除 RAM 使用总量外，也应重点关注堆碎片化问题。堆测量 API 提供了一些方法，可以测量最大空闲内存块。通过监测最大空闲内存块和总空闲字节数，可以快速了解是否存在堆碎片化问题。
|
||||
|
||||
静态内存优化
|
||||
----------------------------
|
||||
|
||||
- 降低应用程序的静态内存使用，会增加运行时堆的可用 RAM 空间，反之亦然。
|
||||
- 优化静态内存使用通常需要监测 ``.data`` 和 ``.bss`` 的大小，有关工具请参阅 :ref:`idf.py-size`。
|
||||
- 在 C 语言中，ESP-IDF 内部函数不会占用大量静态 RAM。在多数情况下（例如 {IDF_TARGET_STATIC_MEANS_HEAP}），静态缓冲区仍从堆中分配。然而，这些分配只在功能初始化阶段进行一次，并在功能去初始化时释放，从而在应用程序生命周期中，优化不同阶段的可用内存。
|
||||
|
||||
要实现静态内存优化，请执行以下操作：
|
||||
|
||||
.. list::
|
||||
|
||||
- 由于常量数据可以存储在 flash 中，不占用 RAM，建议尽量将结构体、缓冲区或其他变量声明为 ``const``。为此，可能需要修改固件参数，使其接收 ``const *`` 参数而非可变指针参数。以上更改还可以减少某些函数的栈内存使用。
|
||||
:SOC_BT_SUPPORTED: - 若使用 Bluedroid，请设置 :ref:`CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY` 选项，Bluedroid 将在初始化时分配内存，并在去初始化时释放内存。这并不一定会降低内存使用峰值，但可以将使用静态内存改为运行时使用动态内存。
|
||||
|
||||
.. _optimize-stack-sizes:
|
||||
|
||||
栈内存大小优化
|
||||
--------------------
|
||||
|
||||
在 FreeRTOS 操作系统中，任务栈通常从堆中分配。每个任务的栈大小固定，且会作为参数传递给 :cpp:func:`xTaskCreate`。每个任务可用的栈内存不得超过为其分配的栈内存大小，否则将导致栈内存溢出或堆内存损坏，使原本可用的程序崩溃。
|
||||
|
||||
因此，确定每个任务栈内存的最佳大小、最小化每个任务栈内存大小、以及最小化任务栈内存的整体数量，都可以大幅减少 RAM 的使用。
|
||||
|
||||
要确定特定任务栈内存的最佳大小，请执行以下操作：
|
||||
|
||||
- 程序运行时，如你认为某任务有未使用的栈内存，可通过其任务句柄调用 :cpp:func:`uxTaskGetStackHighWaterMark`。该函数将以字节为单位，返回任务中生命周期最短的空闲栈内存。
|
||||
|
||||
- 从任务本身内部调用 :cpp:func:`uxTaskGetStackHighWaterMark` 是调用该函数最容易的方式：在任务达到其栈内存使用峰值后，调用 ``uxTaskGetStackHighWaterMark(NULL)`` 获取当前任务的高水位标记，换言之，如果有主循环，请多次执行主循环来覆盖各种状态，随后调用 :cpp:func:`uxTaskGetStackHighWaterMark`。
|
||||
- 通常可以用任务的栈内存总大小减去调用 :cpp:func:`uxTaskGetStackHighWaterMark` 的返回值，计算任务实际使用的栈内存大小，但应留出一定的安全余量，应对运行时栈内存使用量的小幅意外增长。
|
||||
|
||||
- 程序运行时，调用 :cpp:func:`uxTaskGetSystemState` 获取系统中所有任务的摘要，包括各栈内存的高水位标记值。
|
||||
- 在未使用调试器的监视点时，可以设置 :ref:`CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK` 选项。启用此选项时，系统会使用一个观察点，监视每个任务栈的最后一个字节。如果有新的数据覆盖了该字节（例如发生栈溢出），将立即触发 panic。相比默认 :ref:`CONFIG_FREERTOS_CHECK_STACKOVERFLOW` 选项的 ``Check using canary bytes``，这种方式更可靠，因其能够立即触发 panic，而不是在下一次 RTOS 上下文切换时触发。然而，两种选项都存在缺点，有时栈指针可能会跳过监视点或 canary 字节，损坏 RAM 的其他区域。
|
||||
|
||||
要减少特定任务栈内存大小，请执行以下操作：
|
||||
|
||||
- 避免占用过多栈内存的函数。字符串格式化函数（如 ``printf()``）会使用大量栈内存，如果任务不调用这类函数，通常可以减小其占用的栈内存。
|
||||
|
||||
- 启用 :ref:`newlib-nano-formatting`，可以在任务调用 ``printf()`` 或其他 C 语言字符串格式化函数时，减少这类任务的栈内存使用量。
|
||||
|
||||
- 避免在栈上分配大型变量。在 C 语言声明的默认作用域中，任何分配为自动变量的大型结构体或数组都会占用栈内存。要优化这些变量占用的栈内存大小，可以使用静态分配，或仅在需要时从堆中动态分配。
|
||||
- 避免调用深度递归函数。尽管调用单个递归函数并不一定会占用大量栈内存，但若每个函数都包含大量基于栈的变量，那么调用这些函数的开销将会很高。
|
||||
|
||||
要减少任务的整体数量，请执行以下操作：
|
||||
|
||||
- 合并任务。如果从未创建某个特定任务，就不会分配该任务的栈内存，从而极大减少 RAM 使用。如果某些任务可以与另一个任务合并，通常可以将不必要的任务删除。在应用程序中，如果满足以下条件，通常可以合并或删除任务：
|
||||
|
||||
- 任务所执行的内容可以按顺序分解为多个函数调用。
|
||||
- 任务所执行的内容可以分解为较小的工作，这些工作可以通过 FreeRTOS 队列或类似机制串行化，并由工作任务执行。
|
||||
|
||||
内部任务栈内存大小
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
为进行系统维护，或操作系统功能，ESP-IDF 分配了许多内部任务，一部分在启动过程中创建，一部分在初始化特定功能时创建。
|
||||
|
||||
为了确保支持所有常见的使用模式，这些任务栈内存的默认设置值较大。ESP-IDF 支持配置栈内存大小，因此可以减小任务栈内存，匹配其实际运行时的栈内存使用情况。
|
||||
|
||||
.. important::
|
||||
|
||||
如果内部任务的栈内存设置得过小，可能会导致 ESP-IDF 发生无法预测的崩溃。即使任务栈内存溢出是导致崩溃的根本原因，在调试过程中也很难确定具体原因。因此，建议特别关注任务在负载高时的高水位标记，在必要情况下，谨慎减小内部任务的栈内存大小。如果在减小内部任务堆内存大小后，仍遇到问题，请在报告中提供以下信息，以及正在使用的具体配置。
|
||||
|
||||
.. list::
|
||||
|
||||
- :ref:`app-main-task` 的栈内存大小为 :ref:`CONFIG_ESP_MAIN_TASK_STACK_SIZE`。
|
||||
- 系统任务 :doc:`/api-reference/system/esp_timer` 用于执行回调函数，其栈内存大小为 :ref:`CONFIG_ESP_TIMER_TASK_STACK_SIZE`。
|
||||
- 部分 FreeRTOS 定时器任务用于处理 FreeRTOS 定时器回调，其栈内存大小为 :ref:`CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH`。
|
||||
- 系统任务 :doc:`/api-reference/system/esp_event` 用于执行默认系统事件循环回调，其栈内存大小为 :ref:`CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE`。
|
||||
- TCP/IP 任务 :doc:`/api-guides/lwip` 的栈内存大小为 :ref:`CONFIG_LWIP_TCPIP_TASK_STACK_SIZE`。
|
||||
:SOC_BT_SUPPORTED: - :doc:`/api-reference/bluetooth/index` 的栈内存大小为 :ref:`CONFIG_BT_BTC_TASK_STACK_SIZE`，:ref:`CONFIG_BT_BTU_TASK_STACK_SIZE`。
|
||||
:SOC_BT_SUPPORTED: - :doc:`/api-reference/bluetooth/nimble/index` 的栈内存大小为 :ref:`CONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE`。
|
||||
- 以太网驱动程序会创建任务，用于使 MAC 接收以太网帧，在默认配置 ``ETH_MAC_DEFAULT_CONFIG`` 下，任务栈内存大小为 4 KB。在初始化以太网 MAC 时，传递自定义 :cpp:class:`eth_mac_config_t` 结构体可以更改此设置。
|
||||
- FreeRTOS 空闲任务栈内存大小由 :ref:`CONFIG_FREERTOS_IDLE_TASK_STACKSIZE` 配置。
|
||||
- 使用 :doc:`/api-reference/protocols/mqtt` 组件时会创建一个任务，其栈内存大小由 :ref:`CONFIG_MQTT_TASK_STACK_SIZE` 配置。MQTT 栈内存大小也可以使用 :cpp:class:`esp_mqtt_client_config_t` 结构体中的 ``task_stack`` 字段配置。
|
||||
- 有关使用 ``mDNS`` 时内存优化的详细信息，请参阅 `优化内存使用 <https://docs.espressif.com/projects/esp-protocols/mdns/docs/latest/en/index.html#minimizing-ram-usage>`__。
|
||||
|
||||
.. note::
|
||||
|
||||
除 ESP 定时器等内置系统功能外，若固件应用程序没有初始化 ESP-IDF 中特定功能，则不会创建相关任务。此时，相关任务的栈内存使用量为零，而这些功能没有与之关联的任务，因此无需考虑其栈内存大小配置。
|
||||
|
||||
堆内存优化
|
||||
-------------------
|
||||
|
||||
有关分析运行时堆内存使用的函数，请参阅 :doc:`/api-reference/system/heap_debug`。
|
||||
|
||||
通常，堆内存优化包含以下几个方面：分析堆内存使用情况、撤回未使用的 ``malloc()`` 调用、缩小相应的内存使用大小、或提早释放先前分配的缓冲区。
|
||||
|
||||
以下是一些 ESP-IDF 配置选项，有助于在运行时实现堆内存优化：
|
||||
|
||||
.. list::
|
||||
|
||||
- lwIP 文档中的有关章节介绍了如何配置 :ref:`lwip-ram-usage`。
|
||||
:SOC_WIFI_SUPPORTED: - :ref:`wifi-buffer-usage` 中介绍了一些选项，这些选项可以减少对静态缓冲区的使用，或减少运行时动态缓冲区的最大数量，从而最小化内存使用，但可能会影响性能。注意，Wi-Fi 初始化时，仍会从堆中分配静态 Wi-Fi 缓冲区，并在 Wi-Fi 去初始化时释放这些缓冲区。
|
||||
:esp32: - 以太网驱动程序在初始化时会为内部以太网 MAC 分配 DMA 缓冲区，配置选项包括 :ref:`CONFIG_ETH_DMA_BUFFER_SIZE`、:ref:`CONFIG_ETH_DMA_RX_BUFFER_NUM` 和 :ref:`CONFIG_ETH_DMA_TX_BUFFER_NUM`。
|
||||
- 部分 Mbed TLS 配置选项也可用于堆内存优化，详情请参阅 :ref:`reducing_ram_usage_mbedtls` 的 Mbed TLS 部分。
|
||||
:esp32: - 仅在单核模式下，启用 :ref:`CONFIG_ESP32_IRAM_AS_8BIT_ACCESSIBLE_MEMORY`，可以将 IRAM 作为可按字节访问的内存添加到常规堆内存中使用。注意，此选项会影响性能，并存在由可执行数据引发安全问题的风险。若启用此选项，可以通过设置 :ref:`CONFIG_MBEDTLS_MEM_ALLOC_MODE` 和 :ref:`CONFIG_BT_NIMBLE_MEM_ALLOC_MODE` 选项，优先从内存中分配某些缓冲区。
|
||||
:esp32: - 若使用 Bluetooth LE，请优化 :ref:`CONFIG_BTDM_CTRL_BLE_MAX_CONN`。
|
||||
:esp32: - 若使用经典蓝牙，请优化 :ref:`CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN`。
|
||||
|
||||
.. note::
|
||||
|
||||
如果将某些配置选项更改为非默认值，也会增加运行时的堆内存使用。这类选项未在上文中列出，但配置选项的帮助文档中给出了相应说明。
|
||||
|
||||
.. _optimize-iram-usage:
|
||||
|
||||
IRAM 优化
|
||||
-------------
|
||||
|
||||
.. only:: not esp32
|
||||
|
||||
程序运行时，由于使用了静态 IRAM，用于堆内存使用的 DRAM 会相应减少。反之，可以通过减少 IRAM 使用，增加可用 DRAM。
|
||||
|
||||
如果应用程序分配的静态 IRAM 超过可用上限，应用程序将无法构建，并出现链接器错误，如 ``section '.iram0.text' will not fit in region 'iram0_0_seg'``、``IRAM0 segment data does not fit`` 以及 ``region 'iram0_0_seg' overflowed by 84-bytes``。如果发生这种情况，应找到减少静态 IRAM 使用的方法，链接应用程序。
|
||||
|
||||
要分析固件应用程序二进制文件中的 IRAM 使用情况，请使用 :ref:`idf.py-size`。如果固件应用程序链接失败，请参阅 :ref:`idf-size-linker-failed` 中的步骤，分析失败原因。
|
||||
|
||||
要对某些 ESP-IDF 功能进行 IRAM 优化，请使用以下选项：
|
||||
|
||||
.. list::
|
||||
|
||||
- 启用 :ref:`CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH`。只要没有从 ISR 中错误地调用这些函数，就可以在所有配置中安全启用此选项。
|
||||
- 启用 :ref:`CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH`。启用此选项，将在 flash 中放置与快照相关的函数，如 ``vTaskGetSnapshot`` 或 ``uxTaskGetSnapshotAll``。
|
||||
- 启用 :ref:`CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH`。只要没有从 ISR 中错误地调用这些函数，就可以在所有配置中安全启用此选项。
|
||||
- 启用 :ref:`CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH`。如果从 IRAM 中的中断上下文中使用 ISR ringbuf 函数，例如启用了 :ref:`CONFIG_UART_ISR_IN_IRAM`，则无法安全使用此选项。在此情况下，安装 ESP-IDF 相关驱动程序时，将在运行时报错。
|
||||
:SOC_WIFI_SUPPORTED: - 禁用 Wi-Fi 选项 :ref:`CONFIG_ESP_WIFI_IRAM_OPT` 和/或 :ref:`CONFIG_ESP_WIFI_RX_IRAM_OPT` 会释放可用 IRAM，但会牺牲部分 Wi-Fi 性能。
|
||||
:CONFIG_ESP_ROM_HAS_SPI_FLASH: - 启用 :ref:`CONFIG_SPI_FLASH_ROM_IMPL` 选项可以释放一些 IRAM，但此时 esp_flash 错误修复程序及新的 flash 芯片支持将失效，详情请参阅 :doc:`/api-reference/peripherals/spi_flash/spi_flash_idf_vs_rom`。
|
||||
:esp32: - 禁用 :ref:`CONFIG_SPI_FLASH_ROM_DRIVER_PATCH` 选项可以释放一些 IRAM，但仅适用于某些 flash 配置，详情请参阅配置项帮助文档。
|
||||
:esp32: - 如果应用程序基于 ESP32 rev. 3 (ECO3)，且使用 PSRAM，设置 :ref:`CONFIG_ESP32_REV_MIN` 为 ``3``，可以禁用 PSRAM 的错误处理程序，节省 10 KB 乃至更多的 IRAM。
|
||||
- 禁用 :ref:`CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR` 可以防止从 :ref:`iram-safe-interrupt-handlers` 中发布 ``esp_event`` 事件，节省 IRAM 空间。
|
||||
- 禁用 :ref:`CONFIG_SPI_MASTER_ISR_IN_IRAM` 可以防止在写入 flash 时发生 spi_master 中断，节省 IRAM 空间，但可能影响 spi_master 的性能。
|
||||
- 禁用 :ref:`CONFIG_SPI_SLAVE_ISR_IN_IRAM` 可以防止在写入 flash 时发生 spi_slave 中断，节省 IRAM 空间。
|
||||
- 设置 :ref:`CONFIG_HAL_DEFAULT_ASSERTION_LEVEL` 为禁用 HAL 组件的断言，可以节省 IRAM 空间，对于经常调用 ``HAL_ASSERT`` 且位于 IRAM 中的 HAL 代码尤为如此。
|
||||
- 要禁用不需要的 flash 驱动程序，节省 IRAM 空间，请参阅 sdkconfig 菜单中的 ``Auto-detect Flash chips`` 选项。
|
||||
- 启用 :ref:`CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH`。只要未启用 :ref:`CONFIG_SPI_MASTER_ISR_IN_IRAM` 选项，且没有从 ISR 中错误地调用堆函数，就可以在所有配置中安全启用此选项。
|
||||
|
||||
.. only:: esp32
|
||||
|
||||
将 SRAM1 用于 IRAM
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
SRAM1 内存区域通常用于 DRAM 存储，但可以设置 :ref:`CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM` 选项，将其中一部分用作 IRAM 存储。引入该选项前，这个内存区域通常预留给 DRAM 数据使用（如 ``.bss`` ），随后由软件引导加载程序加入到堆中。引入该选项后，引导加载程序的 DRAM 大小会减少到更接近实际需要的值。
|
||||
|
||||
要使用以上选项，ESP-IDF 应能够将新的 SRAM1 区域识别为有效镜像段的加载地址。部分应用程序的代码置于新扩展的 IRAM 区域，如果软件引导加载程序在引入该选项前编译，将无法加载这类应用程序。这类情况通常在进行 OTA 更新时发生，此时仅会更新应用程序。
|
||||
|
||||
如果 IRAM 段放置在无效区域，在启动过程中将检测到以下问题，并导致启动失败：
|
||||
|
||||
.. code-block:: text
|
||||
|
||||
E (204) esp_image: Segment 5 0x400845f8-0x400a126c invalid: bad load address range
|
||||
|
||||
.. warning::
|
||||
|
||||
若与在引入以上配置选项前编译的软件引导加载程序一同使用，使用 :ref:`CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM` 选项编译的应用程序很可能无法启动。若使用旧版本的引导加载程序，并进行 OTA 更新，请在提交任何更新前仔细测试。
|
||||
|
||||
任何最终未用于静态 IRAM 的内存都将添加到堆内存中。
|
||||
|
||||
.. only:: esp32c3
|
||||
|
||||
flash 暂停特性
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
在使用 SPI flash API 和基于 SPI flash API 的 API（如 NVS、分区 API 等）时，将禁用缓存。在此期间执行的所有代码都必须放置于内部 RAM 中，详情请参阅 :ref:`concurrency-constraints-flash`。因此，系统只会执行位于内部 RAM 中的中断处理程序。
|
||||
|
||||
为将代码置于内部 RAM，ESP-IDF 驱动通常支持以下两个选项：
|
||||
|
||||
- 将驱动程序的内部 ISR 处理程序放置在内部 RAM 中。
|
||||
- 将某些控制函数放置在内部 RAM 中。
|
||||
|
||||
在中断上下文中使用用户 ISR 回调及其相关变量时，也必须将其放置在内部 RAM 中。
|
||||
|
||||
将额外代码放置到 IRAM 中，将增加 IRAM 使用量，ESP-IDF 提供了 :ref:`CONFIG_SPI_FLASH_AUTO_SUSPEND` 选项，可以缓解 IRAM 的使用。通过启用此功能，使用 SPI flash API 和基于 SPI flash API 的 API 时，不会导致缓存禁用，因此 flash 中的代码和数据仍可正常执行或访问，但会有些延迟。有关此功能的详细信息，请参阅 :ref:`auto-suspend`。
|
||||
|
||||
有关 flash 暂停特性的使用及其相应的响应时间延迟，请参阅 :example:`system/flash_suspend`。
|
||||
|
||||
|
||||
.. only:: esp32
|
||||
|
||||
在 flash 中放置 C 语言库函数
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
编译 ECO3 及之前的 ESP32 版本时（参阅 :ref:`CONFIG_ESP32_REV_MIN`），会启用 PSRAM 缓存错误的解决方法选项（参阅 :ref:`CONFIG_SPIRAM_CACHE_WORKAROUND`），此选项会重新编译通常位于 ROM 中的 C 语言库函数，并将其放置在 IRAM 中。对于大部分应用程序而言，可以放心将多数 C 语言库函数移到 flash 中，以节省 IRAM 空间。相应选项包括：
|
||||
|
||||
.. list::
|
||||
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBJMP_IN_IRAM`：影响函数 ``longjmp`` 和 ``setjump``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBMATH_IN_IRAM`：影响函数 ``abs``、``div``、``labs``、``ldiv``、``quorem``、``fpclassify`` 和 ``nan``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM`：影响函数 ``utoa``、``itoa``、``atoi``、``atol``、``strtol`` 和 ``strtoul``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBIO_IN_IRAM`：影响函数 ``wcrtomb``、``fvwrite``、``wbuf``、``wsetup``、``fputwc``、``wctomb_r``、``ungetc``、``makebuf``、``fflush``、``refill`` 和 ``sccl``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM`：影响函数 ``asctime``、``asctime_r``、``ctime``、``ctime_r``、``lcltime``、``lcltime_r``、``gmtime``、``gmtime_r``、``strftime``、``mktime``、``tzset_r``、``tzset``、``time``、``gettzinfo``、``systimes``、``month_lengths``、``timelocal``、``tzvars``、``tzlock``、``tzcalc_limits`` 和 ``strptime``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM`：影响函数 ``ctype_``、``toupper``、``tolower``、``toascii``、``strupr``、``bzero``、``isalnum``、``isalpha``、``isascii``、``isblank``、``iscntrl``、``isdigit``、``isgraph``、``islower``、``isprint``、``ispunct``、``isspace`` 和 ``isupper``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBMEM_IN_IRAM`：影响函数 ``memccpy``、``memchr``、``memmove`` 和 ``memrchr``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM`：影响函数 ``strcasecmp``、``strcasestr``、``strchr``、``strcoll``、``strcpy``、``strcspn``、``strdup``、``strdup_r``、``strlcat``、``strlcpy``、``strlen``、``strlwr``、``strncasecmp``、``strncat``、``strncmp``、``strncpy``、``strndup``、``strndup_r``、``strrchr``、``strsep``、``strspn``、``strstr``、``strtok_r 和 ``strupr``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM`：影响函数 ``srand``、``rand`` 和 ``rand_r``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM`：影响函数 ``environ``、``envlock`` 和 ``getenv_r``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM`：影响函数 ``lock``、``isatty``、``fclose``、``open``、``close``、``creat``、``read``、``rshift``、``sbrk``、``stdio``、``syssbrk``、``sysclose``、``sysopen``、``creat``、``sysread``、``syswrite``、``impure``、``fwalk`` 和 ``findfp``。
|
||||
- :ref:`CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM`：影响函数 ``raise`` 和 ``system``。
|
||||
|
||||
具体节省的 IRAM 使用量取决于应用程序实际使用的 C 语言库代码。此外，以下选项可以将更多 C 语言库代码移到 flash 中，但请知悉这可能会影响性能。同时，注意不要在禁用缓存时，从中断使用 :c:macro:`ESP_INTR_FLAG_IRAM` 标记符号分配的 C 语言库函数，详情请参阅 :ref:`iram-safe-interrupt-handlers`。鉴于以上原因，函数 ``itoa``、``memcmp``、``memcpy``、``memset``、``strcat``、``strcmp`` 和 ``strlen`` 始终置于 IRAM 中。
|
||||
|
||||
.. note::
|
||||
|
||||
将常用函数从 IRAM 移动到 flash，可能会增加函数的执行时间。
|
||||
|
||||
.. note::
|
||||
|
||||
部分配置选项可以将一些功能移动到 IRAM 中，从而提高性能，但这类选项默认不进行配置，因此未在此列出。了解启用上述选项对 IRAM 大小造成的影响，请参阅配置项的帮助文本。
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue