Merge branch 'doc/update_dead_url_links_to_iot_solution_repo' into 'master'

fix dead links directed to ESP-IoT-Solution repo

Closes DOC-1101 and IDFCI-472

See merge request espressif/esp-idf!12535

docs/en/api-reference/peripherals/touch_pad.rst

@@ -1,6 +1,5 @@
 Touch Sensor
 ============
-
 :link_to_translation:`zh_CN:[中文]`
 
 Introduction
@@ -20,11 +19,11 @@ A touch sensor system is built on a substrate which carries electrodes and relev
 
 For design, operation, and control registers of a touch sensor, see *{IDF_TARGET_NAME} Technical Reference Manual* > *On-Chip Sensors and Analog Signal Processing* [`PDF <{IDF_TARGET_TRM_EN_URL}#sensor>`__].
 
-In-depth design details of touch sensors and firmware development guidelines for {IDF_TARGET_NAME} are available in `Touch Sensor Application Note <https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md>`_.
+In-depth design details of touch sensors and firmware development guidelines for {IDF_TARGET_NAME} are available in `Touch Sensor Application Note <https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md>`_.
 
 .. only:: esp32
 
-    If you want to test touch sensors in various configurations without building them on your own, check the `Guide for ESP32-Sense Development Kit <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/esp32_sense_kit_guide_en.md>`_.
+    For more information about testing touch sensors in various configurations, please check the `Guide for ESP32-Sense-Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_en.md>`_.
 
 
 Functionality Overview

docs/en/get-started-legacy/establish-serial-connection.rst

@@ -26,12 +26,12 @@ Below are the links to drivers for ESP32 and other boards produced by Espressif:
     :ref:`ESP-WROVER-KIT <esp-modules-and-boards-esp-wrover-kit>`, `FTDI`_
     :ref:`ESP32 Demo Board <esp-modules-and-boards-esp32-demo-board>`, `FTDI`_
     `ESP-Prog`_, `FTDI`_, Programmer board (w/o ESP32)
-    `ESP32-MeshKit-Sense <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP32-MeshKit-Sense_guide_en.md#esp32-meshkit-sense-hardware-design-guidelines>`_, n/a, Use with `ESP-Prog`_
-    `ESP32-Sense Kit <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/esp32_sense_kit_guide_en.md#guide-for-esp32-sense-development-kit>`_, n/a, Use with `ESP-Prog`_
+    `ESP32-MeshKit-Sense <https://github.com/espressif/esp-dev-kits/blob/master/esp32-meshkit-sensor/docs/ESP32-MeshKit-Sense_guide_en.md>`_, n/a, Use with `ESP-Prog`_
+    `ESP32-Sense-Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_en.md>`_, n/a, Use with `ESP-Prog`_
 
 .. _CP210x: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
 .. _FTDI: https://www.ftdichip.com/Drivers/VCP.htm
-.. _ESP-Prog: https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP-Prog_guide_en.md#introduction-to-the-esp-prog-board
+.. _ESP-Prog: https://github.com/espressif/esp-dev-kits/blob/master/esp-prog/docs/ESP-Prog_guide_en.md
 
 * CP210x: `CP210x USB to UART Bridge VCP Drivers <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
 * FTDI: `FTDI Virtual COM Port Drivers <https://www.ftdichip.com/Drivers/VCP.htm>`_

docs/en/get-started/establish-serial-connection.rst

@@ -26,12 +26,12 @@ Below are the links to drivers for {IDF_TARGET_NAME} boards produced by Espressi
         :ref:`ESP-WROVER-KIT <esp-modules-and-boards-esp-wrover-kit>`, `FTDI`_
         :ref:`ESP32 Demo Board <esp-modules-and-boards-esp32-demo-board>`, `FTDI`_
         `ESP-Prog`_, `FTDI`_, Programmer board (w/o ESP32)
-        `ESP32-MeshKit-Sense <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP32-MeshKit-Sense_guide_en.md#esp32-meshkit-sense-hardware-design-guidelines>`_, n/a, Use with `ESP-Prog`_
-        `ESP32-Sense Kit <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/esp32_sense_kit_guide_en.md#guide-for-esp32-sense-development-kit>`_, n/a, Use with `ESP-Prog`_
+        `ESP32-MeshKit-Sense <https://github.com/espressif/esp-dev-kits/blob/master/esp32-meshkit-sensor/docs/ESP32-MeshKit-Sense_guide_en.md>`_, n/a, Use with `ESP-Prog`_
+        `ESP32-Sense-Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_en.md>`_, n/a, Use with `ESP-Prog`_
 
     .. _CP210x: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
     .. _FTDI: https://www.ftdichip.com/Drivers/VCP.htm
-    .. _ESP-Prog: https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP-Prog_guide_en.md#introduction-to-the-esp-prog-board
+    .. _ESP-Prog: https://github.com/espressif/esp-dev-kits/blob/master/esp-prog/docs/ESP-Prog_guide_en.md
 
 * CP210x: `CP210x USB to UART Bridge VCP Drivers <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
 * FTDI: `FTDI Virtual COM Port Drivers <https://www.ftdichip.com/Drivers/VCP.htm>`_

docs/zh_CN/api-reference/peripherals/touch_pad.rst

@@ -12,7 +12,7 @@ ESP32 可支持最多 10 个电容式触摸板/GPIO，触摸板可以以矩阵
 
 如需了解触摸传感器设计、操作及其控制寄存器等相关信息，请参考《`{IDF_TARGET_NAME} 技术参考手册 <{IDF_TARGET_TRM_CN_URL}>`_》(PDF)，您也可以在《ESP32 技术参考手册》中查看这一子系统是如何运行的。
 
-请参考 `触摸传感器应用方案简介 <https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_cn.md>`_，查看触摸传感器设计详情和固件开发指南。如果不想亲自在多种配置环境下测试触摸传感器，请查看 `ESP32 触摸功能开发套件 <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/esp32_sense_kit_guide_cn.md>`_。
+请参考 `触摸传感器应用方案简介 <https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_cn.md>`_，查看触摸传感器设计详情和固件开发指南。更多关于在多种配置环境下测试触摸传感器的信息，请参考 `ESP32 触摸功能开发套件 <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_cn.md>`_。
 
 功能介绍
 ----------------------

docs/zh_CN/get-started-legacy/establish-serial-connection.rst

@@ -26,12 +26,12 @@
     :ref:`ESP-WROVER-KIT <esp-modules-and-boards-esp-wrover-kit>`, `FTDI`_
     :ref:`ESP32 Demo 板 <esp-modules-and-boards-esp32-demo-board>`, `FTDI`_
     `ESP-Prog`_, `FTDI`_, 编程板 (w/o ESP32)
-    `ESP32-MeshKit-Sense <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP32-MeshKit-Sense_guide_en.md#esp32-meshkit-sense-hardware-design-guidelines>`_, n/a, 搭配 `ESP-Prog`_ 使用
-    `ESP32-Sense Kit <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/esp32_sense_kit_guide_en.md#guide-for-esp32-sense-development-kit>`_, n/a, 搭配 `ESP-Prog`_ 使用
+    `ESP32-MeshKit-Sense <https://github.com/espressif/esp-dev-kits/blob/master/esp32-meshkit-sensor/docs/ESP32-MeshKit-Sense_guide_cn.md>`_, n/a, 搭配 `ESP-Prog`_ 使用
+    `ESP32-Sense Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_cn.md>`_, n/a, 搭配 `ESP-Prog`_ 使用
 
 .. _CP210x: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
 .. _FTDI: https://www.ftdichip.com/Drivers/VCP.htm
-.. _ESP-Prog: https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP-Prog_guide_en.md#introduction-to-the-esp-prog-board
+.. _ESP-Prog: https://github.com/espressif/esp-dev-kits/blob/master/esp-prog/docs/ESP-Prog_guide_cn.md
 
 * CP210x: `CP210x USB to UART Bridge VCP Drivers <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
 * FTDI: `FTDI Virtual COM Port Drivers <https://www.ftdichip.com/Drivers/VCP.htm>`_

docs/zh_CN/get-started/establish-serial-connection.rst

@@ -26,12 +26,12 @@
         :ref:`ESP-WROVER-KIT <esp-modules-and-boards-esp-wrover-kit>`, `FTDI`_
         :ref:`ESP32 Demo 板 <esp-modules-and-boards-esp32-demo-board>`, `FTDI`_
         `ESP-Prog`_, `FTDI`_, 编程板 (w/o ESP32)
-        `ESP32-MeshKit-Sense <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP32-MeshKit-Sense_guide_en.md#esp32-meshkit-sense-hardware-design-guidelines>`_, n/a, 搭配 `ESP-Prog`_ 使用
-        `ESP32-Sense Kit <https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/esp32_sense_kit_guide_en.md#guide-for-esp32-sense-development-kit>`_, n/a, 搭配 `ESP-Prog`_ 使用
+        `ESP32-MeshKit-Sense <https://github.com/espressif/esp-dev-kits/blob/master/esp32-meshkit-sensor/docs/ESP32-MeshKit-Sense_guide_cn.md>`_, n/a, 搭配 `ESP-Prog`_ 使用
+        `ESP32-Sense-Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_cn.md>`_, n/a, 搭配 `ESP-Prog`_ 使用
 
 .. _CP210x: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
 .. _FTDI: https://www.ftdichip.com/Drivers/VCP.htm
-.. _ESP-Prog: https://github.com/espressif/esp-iot-solution/blob/master/documents/evaluation_boards/ESP-Prog_guide_en.md#introduction-to-the-esp-prog-board
+.. _ESP-Prog: https://github.com/espressif/esp-dev-kits/blob/master/esp-prog/docs/ESP-Prog_guide_cn.md
 
 * CP210x: `CP210x USB 至 UART 桥 VCP 驱动程序 <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
 * FTDI: `FTDI 虚拟 COM 端口驱动程序 <https://www.ftdichip.com/Drivers/VCP.htm>`_

examples/ethernet/eth2ap/README.md

@@ -1,5 +1,5 @@
 # eth2ap Example
-(See the README.md file in the upper level 'examples' directory for more information about examples. To try a more complex application about Ethernet to WiFi data forwarding, please go to [iot-solution](https://github.com/espressif/esp-iot-solution/tree/master/examples/eth2wifi).)
+(See the README.md file in the upper level 'examples' directory for more information about examples. To try a more complex application about Ethernet to WiFi data forwarding, please go to [iot-solution](https://github.com/espressif/esp-iot-solution/tree/release/v1.0/examples/eth2wifi).)
 
 **Note:** This example uses some internal APIs (e.g. `esp_wifi_internal_tx`) which might get changed between minor versions of ESP-IDF.
 

examples/peripherals/touch_pad_interrupt/README.md

@@ -63,6 +63,6 @@ I (6194) Touch pad: TouchSensor [9] be inactived, status mask 0x0
 
 For a simpler example how to configure and read capacitive touch pads, please refer to [touch_pad_read](../touch_pad_read).
 
-Design and implementation of the touch sensor system is a complex process. The [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md) contains several ESP32 specific notes and comments to optimize the design and get the best out of the application with sensors controlled with the ESP32.
+Design and implementation of the touch sensor system is a complex process. The [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md) contains several ESP32 specific notes and comments to optimize the design and get the best out of the application with sensors controlled with the ESP32.  
 
 See the README.md file in the upper level 'examples' directory for more information about examples.

examples/peripherals/touch_pad_read/README.md

@@ -43,7 +43,7 @@ T1: [6476] T2: [6508] T3: [6641] T4: [8919] T5: [9053] T6: [7190] T7: [7177] T8:
 
 ## Reference Information
 
-For hardware and firmware design guidelines on ESP32 touch sensor system, please refer to [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md), where you may find comprehensive information on how to design and implement touch sensing applications, such as linear slider, wheel slider, matrix buttons and spring buttons.
+For hardware and firmware design guidelines on ESP32 touch sensor system, please refer to [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md), where you may find comprehensive information on how to design and implement touch sensing applications, such as linear slider, wheel slider, matrix buttons and spring buttons.
 
 There is another similar example that demonstrates how to perform simple calibration and trigger an interrupt when a pat is touched - see [touch_pad_interrupt](../touch_pad_interrupt).
 

examples/system/deep_sleep/README.md

@@ -23,7 +23,7 @@ This example should be able to run on any commonly available ESP32 development b
 
 - **EXT1:** GPIO2 and GPIO4 should be connected to LOW to avoid floating pins. When triggering a wake up, connect one or both of the pins to HIGH. Note that floating pins may trigger a wake up.
 
-- **Touch:** GPIO32, GPIO33 in ESP32 or GPIO9 in ESP32-S2 should be connected to touch sensors (see [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/master/documents/touch_pad_solution/touch_sensor_design_en.md)).
+- **Touch:** GPIO32, GPIO33 in ESP32 or GPIO9 in ESP32-S2 should be connected to touch sensors (see [Touch Sensor Application Note](https://github.com/espressif/esp-iot-solution/blob/release/v1.0/documents/touch_pad_solution/touch_sensor_design_en.md)).
 
 ### Configure the project
 

examples/system/ota/README.md

@@ -70,7 +70,7 @@ After a successful build, we need to create a self-signed certificate and run a
   (Some windows builds of openssl translate CR/LF sequences to LF in the served files, leading to corrupted image received by the OTA client; Others might interpret `0x1a`/`SUB` character in the binary as an escape sequence, i.e. end of file, thus closing the connection, failing the OTA client to receive the entire image).
   * It's recommended to use `openssl` bundled in `Git For Windows` from the [ESP-IDF Tool installer](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/windows-setup.html):
   Open the ESP-IDF command prompt and add the internal openssl binary to your path: `set PATH=%LocalAppData%\Git\usr\bin;%PATH%` and run the openssl's http server command as above.
-  * Alternatively, you can use any windows based openssl of version at least `v1.1.1i` build on `Msys-x86_64` platform, or a simple python https server -- see start_https_server in the [example_test](simple_ota/example_test.py) script.
+  * Alternatively, you can use any windows based openssl of version at least `v1.1.1i` build on `Msys-x86_64` platform, or a simple python https server -- see start_https_server in the [example_test](simple_ota_example/example_test.py) script.
 
 ### Flash Certificate to ESP32
 
@@ -141,7 +141,7 @@ Running a local https server might be tricky in some cases (due to self signed c
     - Execute `python -m http.server 8070` in the directory with the firmware image.
     - Use http://<host-ip>:8070/<firmware-name> as firmware upgrade URL.
     - Enable *Allow HTTP for OTA* (`CONFIG_OTA_ALLOW_HTTP`) in `Component config -> ESP HTTPS OTA` so the URI with no certificate is accepted.
-* Start the https server using [example_test](simple_ota/example_test.py) with two or more parameters: `example_test.py <BIN_DIR> <PORT> [CERT_DIR]`, where
+* Start the https server using [example_test](simple_ota_example/example_test.py) with two or more parameters: `example_test.py <BIN_DIR> <PORT> [CERT_DIR]`, where
     - `<BIN_DIR>` is a directory containing the image and by default also the certificate and key files:`ca_cert.pem` and `ca_key.pem`.
     - `<PORT>` is the server's port, here `8070`
     - `[CERT_DIR]` is an optional argument pointing to a specific directory with the certificate and key file.