kopia lustrzana https://github.com/espressif/esp-idf
Delete a file which accidentally ended up in the idf's root derictory. Its original copy is safe and sound where it should be and is up to date.
Kirill Chalov
rodzic
18946a5421
commit
ade05b4802
|
|
@ -1,379 +0,0 @@
|
|||
ESP-WROVER-KIT V3 Getting Started Guide
|
||||
=========================================
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This guide shows how to get started with the ESP-WROVER-KIT V3 development board and also provides information about its functionality and configuration options. For description of other ESP-WROVER-KIT versions, please check :doc:`../hw-reference/index`.
|
||||
|
||||
|
||||
What You Need
|
||||
-------------
|
||||
|
||||
* :ref:`ESP-WROVER-KIT V3 board <get-started-esp-wrover-kit-v3-board-front>`
|
||||
* USB 2.0 A to Micro B Cable
|
||||
* Computer running Windows, Linux, or macOS
|
||||
|
||||
You can skip the introduction sections and go directly to Section `Start Application Development`_.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
ESP-WROVER-KIT is an ESP32-based development board produced by `Espressif <https://espressif.com>`_. This development board features an integrated LCD screen and MicroSD card slot.
|
||||
|
||||
ESP-WROVER-KIT comes with the following ESP32 modules:
|
||||
|
||||
- :ref:`esp-modules-and-boards-esp32-wroom-32`
|
||||
- :ref:`ESP32-WROVER <esp-modules-and-boards-esp32-wrover>`
|
||||
|
||||
Another board's distinguishing feature is its embedded FTDI FT2232HL chip - an advanced multi-interface USB bridge. This chip enables to use JTAG for direct debugging of ESP32 through the USB interface without a separate JTAG debugger. ESP-WROVER-KIT makes secondary development easy and cost-effective.
|
||||
|
||||
Most of the ESP32 I/O pins are broken out to the board's pin headers for easy access.
|
||||
|
||||
.. note::
|
||||
|
||||
The version with the ESP32-WROVER module uses ESP32's GPIO16 and GPIO17 as chip select and clock signals for PSRAM. By default, the two GPIOs are not broken out to the board's pin headers in order to ensure reliable performance.
|
||||
|
||||
|
||||
Functionality Overview
|
||||
----------------------
|
||||
|
||||
The block diagram below shows the main components of ESP-WROVER-KIT and their interconnections.
|
||||
|
||||
.. figure:: ../../_static/esp-wrover-kit-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-WROVER-KIT block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-WROVER-KIT block diagram
|
||||
|
||||
|
||||
Functional Description
|
||||
----------------------
|
||||
|
||||
The following two figures and the table below describe the key components, interfaces and controls of the ESP-WROVER-KIT board.
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-board-front:
|
||||
|
||||
.. figure:: ../../_static/esp-wrover-kit-v3-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-WROVER-KIT board layout - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP-WROVER-KIT board layout - front
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-board-back:
|
||||
|
||||
.. figure:: ../../_static/esp-wrover-kit-v3-layout-back.png
|
||||
:align: center
|
||||
:alt: ESP-WROVER-KIT board layout - back
|
||||
:figclass: align-center
|
||||
|
||||
ESP-WROVER-KIT board layout - back
|
||||
|
||||
|
||||
The table below provides description in the following manner:
|
||||
|
||||
- Starting from the the first picture's top right corner and going clockwise
|
||||
- Then moving on to the second picture
|
||||
|
||||
|
||||
================== =================================================================================================================================
|
||||
Key Component Description
|
||||
================== =================================================================================================================================
|
||||
32.768 kHz External precision 32.768 kHz crystal oscillator serves as a clock with low-power consumption while the chip is in Deep-sleep mode.
|
||||
|
||||
0R Zero-ohm resistor intended as a placeholder for a current shunt, may be desoldered or replaced with a current shunt to facilitate the measurement of ESP32's current consumption in different modes.
|
||||
|
||||
ESP32 Module Either ESP32-WROOM-32 or ESP32-WROVER with an integrated ESP32.
|
||||
|
||||
FT2232 The FT2232 chip serves as a multi-protocol USB-to-serial bridge which can be programmed and controlled via USB to provide communication with ESP32. FT2232 also features USB-to-JTAG interface which is available on channel A of the chip, while USB-to-serial is on channel B. The FT2232 chip enhances user-friendliness in terms of application development and debugging. See `ESP-WROVER-KIT V3 schematic`_.
|
||||
|
||||
UART Serial port. The serial TX/RX signals of FT2232 and ESP32 are broken out to the inward and outward sides of JP11 respectively. By default, these pairs of pins are connected with jumpers. To use ESP32's serial interface, remove the jumpers and connect another external serial device to the respective pins.
|
||||
|
||||
SPI SPI interface is used by ESP32 to access flash and PSRAM memory inside the module. To interface another SPI device, an extra chip select (CS) signal is needed. Please note that the interface voltage for the version with ESP32-WROVER is 1.8V, while that for the version with ESP32-WROOM-32 is 3.3V.
|
||||
|
||||
CTS/RTS Serial port flow control signals: the pins are not connected to the circuitry by default. To enable them, short the respective pins of JP14 with jumpers.
|
||||
|
||||
JTAG JTAG interface. JTAG signals of FT2232 and ESP32 are broken out to the inward and outward sides of JP8 respectively. By default, these pairs of pins are disconnected. To enable JTAG, short the respective pins with jumpers as shown in Section :ref:`get-started-esp-wrover-kit-v3-setup-options`.
|
||||
|
||||
EN Button Reset button.
|
||||
|
||||
Boot Button Download button. Holding down **Boot** and then pressing **EN** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
|
||||
USB Port USB interface. Power supply for the board as well as the communication interface between a computer and the board.
|
||||
|
||||
Power Key Power On/Off Switch. Toggling toward **USB** powers the board on, toggling away from **USB** powers the board off.
|
||||
|
||||
Power Select Power supply selector interface. The board can be powered either via USB or via the 5V Input interface. Select the power supply with a jumper. For more details, see Section :ref:`get-started-esp-wrover-kit-v3-setup-options`, jumper header JP7.
|
||||
|
||||
5V Input The 5V power supply interface can be more convenient when the board is operating autonomously (not connected to a computer).
|
||||
|
||||
LDO NCP1117(1A). 5V-to-3.3V LDO. NCP1117 can provide a maximum current of 1A. The LDO solution is available with both fixed and adjustable output voltages. For details please refer to `ESP-WROVER-KIT V3 schematic`_.
|
||||
|
||||
Camera Camera interface, a standard OV7670 camera module.
|
||||
|
||||
RGB LED Red, green and blue (RGB) light emitting diodes (LEDs), can be controlled by pulse width modulation (PWM).
|
||||
|
||||
I/O All the pins on the ESP32 module are broken out to pin headers. You can program ESP32 to enable multiple functions, such as PWM, ADC, DAC, I2C, I2S, SPI, etc.
|
||||
|
||||
Micro SD Card Slot Useful for developing applications that access Micro SD card for data storage and retrieval.
|
||||
|
||||
LCD Support for mounting and interfacing a 3.2” SPI (standard 4-wire Serial Peripheral Interface) LCD, as shown on figure :ref:`get-started-esp-wrover-kit-v3-board-back`.
|
||||
================== =================================================================================================================================
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-setup-options:
|
||||
|
||||
Setup Options
|
||||
-------------
|
||||
|
||||
There are three jumper blocks available to set up the board functionality. The most frequently required options are listed in the table below.
|
||||
|
||||
======= ================ =========================================================
|
||||
Header Jumper Setting Description of Functionality
|
||||
======= ================ =========================================================
|
||||
JP7 |jp7-ext_5v| Power ESP-WROVER-KIT via an external power supply
|
||||
JP7 |jp7-usb_5v| Power ESP-WROVER-KIT via USB
|
||||
JP8 |jp8-jtag| Enable JTAG functionality
|
||||
JP11 |jp11-tx-rx| Enable UART communication
|
||||
JP14 |jp14| Enable RTS/CTS flow control for serial communication
|
||||
======= ================ =========================================================
|
||||
|
||||
|
||||
Allocation of ESP32 Pins
|
||||
------------------------
|
||||
|
||||
Some pins / terminals of ESP32 are allocated for use with the onboard or external hardware. If that hardware is not used, e.g. nothing is plugged into the Camera (JP4) header, then these GPIOs can be used for other purposes.
|
||||
|
||||
Some of the pins, such as GPIO0 or GPIO2, have multiple functions and some of them are shared among onboard and external peripheral devices. Certain combinations of peripherals cannot work together. For example it is not possible to do JTAG debugging of an application that is using SD card, because several pins are shared by JTAG and the SD card slot.
|
||||
|
||||
In other cases peripherals can coexist under certain conditions. This is applicable to, for example, LCD screen and SD card that share only a single pin GPIO21. This pin is used to provide D/C (Data / Control) signal for the LCD as well as the CD (Card Detect) signal read from the SD card slot. If the card detect functionality is not essential, then it may be disabled by removing R167, so both LCD and SD may operate together.
|
||||
|
||||
For more details on which pins are shared among which peripherals please refer to the table in the next section.
|
||||
|
||||
|
||||
Main I/O Connector / JP1
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The JP1 connector consists of 14x2 male pins whose functions are shown in the middle two "I/O" columns of the table below. The two "Shared With" columns on both sides describe where else on the board a certain GPIO is used.
|
||||
|
||||
===================== ===== ===== =====================
|
||||
Shared With I/O I/O Shared With
|
||||
===================== ===== ===== =====================
|
||||
n/a 3.3V GND n/a
|
||||
NC/XTAL IO32 IO33 NC/XTAL
|
||||
JTAG, MicroSD IO12 IO13 JTAG, MicroSD
|
||||
JTAG, MicroSD IO14 IO27 Camera
|
||||
Camera IO26 IO25 Camera, LCD
|
||||
Camera IO35 IO34 Camera
|
||||
Camera IO39 IO36 Camera
|
||||
JTAG EN IO23 Camera, LCD
|
||||
Camera, LCD IO22 IO21 Camera, LCD, MicroSD
|
||||
Camera, LCD IO19 IO18 Camera, LCD
|
||||
Camera, LCD IO5 IO17 PSRAM
|
||||
PSRAM IO16 IO4 LED, Camera, MicroSD
|
||||
Camera, LED, Boot IO0 IO2 LED, MicroSD
|
||||
JTAG, MicroSD IO15 5V
|
||||
===================== ===== ===== =====================
|
||||
|
||||
Legend:
|
||||
|
||||
* NC/XTAL - :ref:`32.768 kHz Oscillator <get-started-esp-wrover-kit-v3-xtal>`
|
||||
* JTAG - :ref:`JTAG / JP8 <get-started-esp-wrover-kit-v3-jtag-header>`
|
||||
* Boot - Boot button / SW2
|
||||
* Camera - :ref:`Camera / JP4 <get-started-esp-wrover-kit-v3-camera-header>`
|
||||
* LED - :ref:`RGB LED <get-started-esp-wrover-kit-v3-rgb-led-connections>`
|
||||
* MicroSD - :ref:`MicroSD Card / J4 <get-started-esp-wrover-kit-v3-microsd-card-slot>`
|
||||
* LCD - :ref:`LCD / U5 <get-started-esp-wrover-kit-v3-lcd-connector>`
|
||||
* PSRAM - ESP32-WROVER-B's PSRAM
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-xtal:
|
||||
|
||||
32.768 kHz Oscillator
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
==== ==========
|
||||
. ESP32 Pin
|
||||
==== ==========
|
||||
1 GPIO32
|
||||
2 GPIO33
|
||||
==== ==========
|
||||
|
||||
.. note::
|
||||
|
||||
Since GPIO32 and GPIO33 are connected to the oscillator by default, they are not connected to JP1 I/O connector to maintain signal integrity. This allocation may be changed from the oscillator to JP1 by desoldering the zero-ohm resistors from positions R11 / R23 and then soldering the resistors in positions R12 / R24.
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-spi-flash-header:
|
||||
|
||||
SPI Flash / JP13
|
||||
^^^^^^^^^^^^^^^
|
||||
|
||||
==== =============
|
||||
. ESP32 Pin
|
||||
==== =============
|
||||
1 CLK / GPIO6
|
||||
2 SD0 / GPIO7
|
||||
3 SD1 / GPIO8
|
||||
4 SD2 / GPIO9
|
||||
5 SD3 / GPIO10
|
||||
6 CMD / GPIO11
|
||||
==== =============
|
||||
|
||||
.. important::
|
||||
|
||||
The module's flash bus is connected to the jumper block JP13 through zero-ohm resistors R140 ~ R145. If the flash memory needs to operate at the frequency of 80 MHz, for reasons such as improving the integrity of bus signals, you can disolder these resistors to disconnect the module's flash bus from the pin header JP13.
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-jtag-header:
|
||||
|
||||
JTAG / JP8
|
||||
^^^^^^^^^^
|
||||
|
||||
==== ============== =============
|
||||
. ESP32 Pin JTAG Signal
|
||||
==== ============== =============
|
||||
1 EN TRST_N
|
||||
2 MTMS / GPIO14 TMS
|
||||
3 MTDO / GPIO15 TDO
|
||||
4 MTDI / GPIO12 TDI
|
||||
5 MTCK / GPIO13 TCK
|
||||
==== ============== =============
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-camera-header:
|
||||
|
||||
Camera / JP4
|
||||
^^^^^^^^^^^^
|
||||
|
||||
==== ========== =============================
|
||||
. ESP32 Pin Camera Signal
|
||||
==== ========== =============================
|
||||
1 n/a 3.3V
|
||||
2 n/a Ground
|
||||
3 GPIO27 SIO_C / SCCB Clock
|
||||
4 GPIO26 SIO_D / SCCB Data
|
||||
5 GPIO25 VSYNC / Vertical Sync
|
||||
6 GPIO23 HREF / Horizontal Reference
|
||||
7 GPIO22 PCLK / Pixel Clock
|
||||
8 GPIO21 XCLK / System Clock
|
||||
9 GPIO35 D7 / Pixel Data Bit 7
|
||||
10 GPIO34 D6 / Pixel Data Bit 6
|
||||
11 GPIO39 D5 / Pixel Data Bit 5
|
||||
12 GPIO36 D4 / Pixel Data Bit 4
|
||||
13 GPIO19 D3 / Pixel Data Bit 3
|
||||
14 GPIO18 D2 / Pixel Data Bit 2
|
||||
15 GPIO5 D1 / Pixel Data Bit 1
|
||||
16 GPIO4 D0 / Pixel Data Bit 0
|
||||
17 GPIO0 RESET / Camera Reset
|
||||
18 n/a PWDN / Camera Power Down
|
||||
==== ========== =============================
|
||||
|
||||
* Signals D0 .. D7 denote camera data bus
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-rgb-led-connections:
|
||||
|
||||
RGB LED
|
||||
^^^^^^^
|
||||
|
||||
==== ========== =========
|
||||
. ESP32 Pin RGB LED
|
||||
==== ========== =========
|
||||
1 GPIO0 Red
|
||||
2 GPIO2 Green
|
||||
3 GPIO4 Blue
|
||||
==== ========== =========
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-microsd-card-slot:
|
||||
|
||||
MicroSD Card / J4
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
==== ============== ===============
|
||||
. ESP32 Pin MicroSD Signal
|
||||
==== ============== ===============
|
||||
1 MTDI / GPIO12 DATA2
|
||||
2 MTCK / GPIO13 CD / DATA3
|
||||
3 MTDO / GPIO15 CMD
|
||||
4 MTMS / GPIO14 CLK
|
||||
5 GPIO2 DATA0
|
||||
6 GPIO4 DATA1
|
||||
7 GPIO21 CD
|
||||
==== ============== ===============
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-v3-lcd-connector:
|
||||
|
||||
LCD / U5
|
||||
^^^^^^^^
|
||||
|
||||
==== ============== ===============
|
||||
. ESP32 Pin LCD Signal
|
||||
==== ============== ===============
|
||||
1 GPIO18 RESET
|
||||
2 GPIO19 SCL
|
||||
3 GPIO21 D/C
|
||||
4 GPIO22 CS
|
||||
5 GPIO23 SDA
|
||||
6 GPIO25 SDO
|
||||
7 GPIO5 Backlight
|
||||
==== ============== ===============
|
||||
|
||||
|
||||
.. _get-started-esp-wrover-kit-start-development:
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-WROVER-KIT, please make sure that the board is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Initial Setup
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
Please set only the following jumpers shown in the pictures below:
|
||||
|
||||
- Select USB as the source of power supply using the jumper block JP7.
|
||||
|
||||
- Enable UART communication using the jumper block JP11.
|
||||
|
||||
======================== ==========================
|
||||
Power up from USB port Enable UART communication
|
||||
======================== ==========================
|
||||
|jp7-usb_5v| |jp11-tx-rx|
|
||||
======================== ==========================
|
||||
|
||||
Do not install any other jumpers.
|
||||
|
||||
Turn the **Power Switch** to ON, the **5V Power On LED** should light up.
|
||||
|
||||
Now to Development
|
||||
^^^^^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an example project onto your board.
|
||||
|
||||
|
||||
Related Documents
|
||||
-----------------
|
||||
|
||||
* `ESP-WROVER-KIT V3 schematic`_ (PDF)
|
||||
* `ESP32 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP32-WROVER-B Datasheet <https://espressif.com/sites/default/files/documentation/esp32-wrover-b_datasheet_en.pdf>`_ (PDF)
|
||||
* :doc:`../api-guides/jtag-debugging/index`
|
||||
* :doc:`../hw-reference/index`
|
||||
|
||||
.. |jp7-ext_5v| image:: ../../_static/esp-wrover-kit-v3-jp7-ext_5v.jpg
|
||||
.. |jp7-usb_5v| image:: ../../_static/esp-wrover-kit-v3-jp7-usb_5v.jpg
|
||||
.. |jp8-jtag| image:: ../../_static/esp-wrover-kit-v3-jp8-jtag.jpg
|
||||
.. |jp11-tx-rx| image:: ../../_static/esp-wrover-kit-v3-jp11-tx-rx.jpg
|
||||
.. |jp14| image:: ../../_static/esp-wrover-kit-v3-jp14.jpg
|
||||
|
||||
.. _ESP-WROVER-KIT V3 schematic: https://dl.espressif.com/dl/schematics/ESP-WROVER-KIT_V4_1.pdf
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
get-started-wrover-kit-v2.rst
|
||||
Ładowanie…
Reference in New Issue