mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

bugfix(rmt): fix event thresh check issue 

reported from: https://github.com/espressif/esp-idf/issues/1011

1. Fix event thresh check issue
2. Change IO number in example in case it conflicts with GPIO16(psram cs pin).
pull/1158/head
Wangjialin 2017-10-18 18:49:09 +08:00
rodzic d0df8f2811
commit ab1abff080
2 zmienionych plików z 6 dodań i 4 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

8
components/driver/rmt.c
Wyświetl plik

@ -351,8 +351,10 @@ esp_err_t rmt_set_tx_thr_intr_en(rmt_channel_t channel, bool en, uint16_t evt_th
{
RMT_CHECK(channel < RMT_CHANNEL_MAX, RMT_CHANNEL_ERROR_STR, ESP_ERR_INVALID_ARG);
if(en) {
RMT_CHECK(evt_thresh < 256, "RMT EVT THRESH ERR", ESP_ERR_INVALID_ARG);
RMT_CHECK(evt_thresh <= 256, "RMT EVT THRESH ERR", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&rmt_spinlock);
RMT.tx_lim_ch[channel].limit = evt_thresh;
portEXIT_CRITICAL(&rmt_spinlock);
rmt_set_tx_wrap_en(channel, true);
rmt_set_intr_enable_mask(BIT(channel + 24));
} else {
@ -424,8 +426,6 @@ esp_err_t rmt_config(const rmt_config_t* rmt_param)
/*Set idle level */
RMT.conf_ch[channel].conf1.idle_out_en = rmt_param->tx_config.idle_output_en;
RMT.conf_ch[channel].conf1.idle_out_lv = idle_level;
portEXIT_CRITICAL(&rmt_spinlock);
/*Set carrier*/
RMT.conf_ch[channel].conf0.carrier_en = carrier_en;
if (carrier_en) {
@ -441,6 +441,8 @@ esp_err_t rmt_config(const rmt_config_t* rmt_param)
RMT.carrier_duty_ch[channel].high = 0;
RMT.carrier_duty_ch[channel].low = 0;
}
portEXIT_CRITICAL(&rmt_spinlock);
ESP_LOGD(RMT_TAG, "Rmt Tx Channel %u|Gpio %u|Sclk_Hz %u|Div %u|Carrier_Hz %u|Duty %u",
channel, gpio_num, rmt_source_clk_hz, clk_div, carrier_freq_hz, carrier_duty_percent);

2
examples/peripherals/rmt_nec_tx_rx/main/infrared_nec_main.c
Wyświetl plik

@ -40,7 +40,7 @@ static const char* NEC_TAG = "NEC";
#endif
#define RMT_TX_CHANNEL 1 /*!< RMT channel for transmitter */
#define RMT_TX_GPIO_NUM 16 /*!< GPIO number for transmitter signal */
#define RMT_TX_GPIO_NUM 18 /*!< GPIO number for transmitter signal */
#define RMT_RX_CHANNEL 0 /*!< RMT channel for receiver */
#define RMT_RX_GPIO_NUM 19 /*!< GPIO number for receiver */
#define RMT_CLK_DIV 100 /*!< RMT counter clock divider */