From aac827ede7e3755fead4510b835eb13cd2aec033 Mon Sep 17 00:00:00 2001
From: Linda <zhangxiaoyan@espressif.com>
Date: Wed, 22 Feb 2023 12:20:45 +0800
Subject: [PATCH] format temp_sensor.rst

---
 .../api-reference/peripherals/temp_sensor.rst | 65 +++++++++++--------
 1 file changed, 37 insertions(+), 28 deletions(-)

diff --git a/docs/en/api-reference/peripherals/temp_sensor.rst b/docs/en/api-reference/peripherals/temp_sensor.rst
index a9e9fcb1be..44ec8f9fb7 100644
--- a/docs/en/api-reference/peripherals/temp_sensor.rst
+++ b/docs/en/api-reference/peripherals/temp_sensor.rst
@@ -6,54 +6,63 @@ Overview
 
 The {IDF_TARGET_NAME} has a built-in temperature sensor used to measure the chip's internal temperature, and hard to measure the environmental temperature accurately. Being built-in means that the temperature sensor should work on any {IDF_TARGET_NAME} regardless of what board the chip is embedded in. The temperature sensor module contains an 8-bit Sigma-Delta ADC and a temperature offset DAC.
 
-The conversion relationship is the first columns of the table below. Among them, offset = 0 is the main measurement option, and other values are extended measurement options.
+The conversion relationship is the first columns of the table below. Among them, Offset = 0 is the default measurement option, and other values are extended measurement options.
 
-+--------+------------------------+------------------------+
-| offset | measure range(Celsius) | measure error(Celsius) |
-+========+========================+========================+
-|   -2   |        50 ~ 125        |           < 3          |
-+--------+------------------------+------------------------+
-|   -1   |        20 ~ 100        |           < 2          |
-+--------+------------------------+------------------------+
-|    0   |       -10 ~ 80         |           < 1          |
-+--------+------------------------+------------------------+
-|    1   |       -30 ~ 50         |           < 2          |
-+--------+------------------------+------------------------+
-|    2   |       -40 ~ 20         |           < 3          |
-+--------+------------------------+------------------------+
+.. list-table::
+   :header-rows: 1
+   :widths: 25 50 50
+
+   * - Offset
+     - Measurement Range (°C)
+     - Measurement Error (°C)
+   * - -2
+     - 50 ~ 125
+     - < 3
+   * - -1
+     - 20 ~ 100
+     - < 2
+   * - 0
+     - -10 ~ 80
+     - < 1
+   * - 1
+     - -30 ~ 50
+     - < 2
+   * - 2
+     - -40 ~ 20
+     - < 3
 
 Driver Usage
 ------------
 
 1. Initialize the temperature sensor by calling the function :cpp:func:`temp_sensor_set_config` and pass to it a :cpp:type:`temp_sensor_config_t` structure. The :cpp:type:`temp_sensor_config_t` structure should contain all the required parameters. See the example below.
 
-.. code-block:: c
+  .. code-block:: c
 
-    temp_sensor_config_t temp_sensor = {
-        .dac_offset = TSENS_DAC_L2,
-        .clk_div = 6,
-    };
-    temp_sensor_set_config(temp_sensor);
+      temp_sensor_config_t temp_sensor = {
+          .dac_offset = TSENS_DAC_L2,
+          .clk_div = 6,
+      };
+      temp_sensor_set_config(temp_sensor);
 
-2. Start the temp_sensor by calling :cpp:func:'temp_sensor_start'. The temperature sensor will now measure the temperature.
+1. Start the temperature sensor by calling :cpp:func:`temp_sensor_start`, and then the sensor will start to measure the temperature.
 
-3. To get the current temperature, take the example below as a reference, the value you get is in Celsius.
+2. To get the current temperature, you can take the example below as a reference, and the temperatures you get are in Celsius.
 
-.. code-block:: c
+  .. code-block:: c
 
-    float tsens_out;
-    temp_sensor_read_celsius(&tsens_out);
+      float tsens_out;
+      temp_sensor_read_celsius(&tsens_out);
 
-4. To stop the temperature sensor, please call :cpp:func:'temp_sensor_stop'.
+1. To stop the temperature sensor, please call :cpp:func:`temp_sensor_stop`.
 
 .. note::
 
-    If you want dynamic reconfiguration, you need to stop the sensor first (temp_sensor_stop), set the new configuration (temp_sensor_set_config), then start the sensor again (temp_sensor_start).
+    To realize dynamic reconfiguration, you need to stop the sensor first with :cpp:func:`temp_sensor_stop`, then set the new configuration with :cpp:func:`temp_sensor_set_config`, and then re-start the sensor with :cpp:func:`temp_sensor_start`.
 
 Application Example
 -------------------
 
-Temperature sensor reading example: :example:`peripherals/temp_sensor`.
+For examples of the temperature sensor, please refer to :example:`peripherals/temp_sensor`.
 
 API Reference - Normal Temp Sensor
 ----------------------------------