docs: add an example list for esp-wrover-kit

docs/en/hw-reference/esp32/get-started-wrover-kit.rst

@@ -363,6 +363,11 @@ Now to Development
 
 Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an example project onto your board.
 
+The application examples that use some hardware specific to your ESP-WROVER-KIT can be found below.
+
+* On-board LCD example: :example:`peripherals/spi_master/lcd`
+* SD card slot example: :example:`storage/sd_card`
+* Camera connector example: https://github.com/espressif/esp32-camera
 
 Related Documents
 -----------------

docs/zh_CN/hw-reference/esp32/get-started-wrover-kit.rst

@@ -425,6 +425,12 @@ USB 供电                   使能 UART 通信
 
 现在，请前往 :doc:`../../get-started/index` 中的 :ref:`get-started-step-by-step` 章节，查看如何设置开发环境，并尝试将示例项目烧录至您的开发板。
 
+以下链接提供了与 ESP-WROVER-KIT 开发板硬件相关的示例：
+
+* 板上 LCD 示例：:example:`peripherals/spi_master/lcd`
+* SD 卡槽示例： :example:`storage/sd_card`
+* 摄像头示例：https://github.com/espressif/esp32-camera
+
 
 相关文档
 -----------------