kopia lustrzana https://github.com/espressif/esp-idf
docs: Updated Getting Started for ESP32-P4 support
Wang Fang
rodzic
d3abfa3d73
commit
937b290bee
|
|
@ -52,12 +52,3 @@ api-reference/system/sleep_modes.rst
|
|||
api-reference/system/random.rst
|
||||
api-reference/system/power_management.rst
|
||||
api-reference/system/inc/power_management_esp32p4.rst
|
||||
get-started/establish-serial-connection.rst
|
||||
get-started/linux-macos-setup.rst
|
||||
get-started/linux-macos-start-project.rst
|
||||
get-started/windows-setup.rst
|
||||
get-started/start-project.rst
|
||||
get-started/flashing-troubleshooting.rst
|
||||
get-started/windows-start-project.rst
|
||||
get-started/index.rst
|
||||
get-started/windows-setup-update.rst
|
||||
|
|
|
|||
|
|
@ -1 +1,39 @@
|
|||
.. output_log
|
||||
.. output_log
|
||||
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
...
|
||||
esptool.py v4.8.dev3
|
||||
Serial port /dev/cu.SLAB_USBtoUART
|
||||
Connecting....
|
||||
Chip is ESP32-P4 (revision v0.0)
|
||||
Features: High-Performance MCU
|
||||
Crystal is 40MHz
|
||||
MAC: 00:00:00:00:00:00
|
||||
Uploading stub...
|
||||
Running stub...
|
||||
Stub running...
|
||||
Changing baud rate to 460800
|
||||
Changed.
|
||||
Configuring flash size...
|
||||
Flash will be erased from 0x00002000 to 0x00007fff...
|
||||
Flash will be erased from 0x00010000 to 0x0003bfff...
|
||||
Flash will be erased from 0x00008000 to 0x00008fff...
|
||||
SHA digest in image updated
|
||||
Compressed 20960 bytes to 12653...
|
||||
Writing at 0x00002000... (100 %)
|
||||
Wrote 20960 bytes (12653 compressed) at 0x00002000 in 0.6 seconds (effective 277.1 kbit/s)...
|
||||
Hash of data verified.
|
||||
Compressed 179584 bytes to 94528...
|
||||
Writing at 0x00035efb... (100 %)
|
||||
Wrote 179584 bytes (94528 compressed) at 0x00010000 in 2.6 seconds (effective 549.9 kbit/s)...
|
||||
Hash of data verified.
|
||||
Compressed 3072 bytes to 103...
|
||||
Writing at 0x00008000... (100 %)
|
||||
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 420.7 kbit/s)...
|
||||
Hash of data verified.
|
||||
|
||||
Leaving...
|
||||
Hard resetting via RTS pin...
|
||||
Done
|
||||
|
|
|
|||
|
|
@ -141,12 +141,12 @@ Sometimes the USB-to-UART bridge is external. This is often used in small develo
|
|||
|
||||
For the {IDF_TARGET_NAME}, the USB peripheral is available, allowing you to flash the binaries without the need for an external USB-to-UART bridge.
|
||||
|
||||
{IDF_TARGET_USB_PIN_DM:default="Not Updated!", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26"}
|
||||
{IDF_TARGET_USB_PIN_DP:default="Not Updated!", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27"}
|
||||
{IDF_TARGET_USB_PIN_DM:default="Not Updated!", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26", esp32p4="GPIO24/26"}
|
||||
{IDF_TARGET_USB_PIN_DP:default="Not Updated!", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27", esp32p4="GPIO25/27"}
|
||||
|
||||
The USB on the {IDF_TARGET_NAME} uses the **{IDF_TARGET_USB_PIN_DP}** for **D+** and **{IDF_TARGET_USB_PIN_DM}** for **D-**.
|
||||
|
||||
.. only:: SOC_USB_SERIAL_JTAG_SUPPORTED and not esp32s3
|
||||
.. only:: SOC_USB_SERIAL_JTAG_SUPPORTED and not esp32s3 and not esp32p4
|
||||
|
||||
.. note:: The {IDF_TARGET_NAME} supports only *USB CDC and JTAG*.
|
||||
|
||||
|
|
@ -348,6 +348,8 @@ To spare you the trouble of installing a serial terminal program, macOS offers t
|
|||
Example Output
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35"}
|
||||
|
||||
An example log is shown below. Reset the board if you do not see anything.
|
||||
|
||||
.. highlight:: none
|
||||
|
|
@ -376,7 +378,7 @@ If you can see readable log output, it means serial connection is working and yo
|
|||
|
||||
.. note::
|
||||
|
||||
For some serial port wiring configurations, the serial RTS & DTR pins need to be disabled in the terminal program before the {IDF_TARGET_NAME} booting and producing serial output. This depends on the hardware itself, most development boards (including all Espressif boards) *do not* have this issue. The issue is present if RTS & DTR are wired directly to the EN & GPIO0 pins. See the `esptool documentation`_ for more details.
|
||||
For some serial port wiring configurations, the serial RTS & DTR pins need to be disabled in the terminal program before the {IDF_TARGET_NAME} booting and producing serial output. This depends on the hardware itself, most development boards (including all Espressif boards) *do not* have this issue. The issue is present if RTS & DTR are wired directly to the EN & {IDF_TARGET_STRAP_GPIO} pins. See the `esptool documentation`_ for more details.
|
||||
|
||||
If you got here from :ref:`get-started-connect` when installing s/w for {IDF_TARGET_NAME} development, then you can continue with :ref:`get-started-configure`.
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ Flashing Troubleshooting
|
|||
Failed to Connect
|
||||
-----------------
|
||||
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9"}
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35"}
|
||||
|
||||
If you run the given command and see errors such as "Failed to connect", there might be several reasons for this. One of the reasons might be issues encountered by ``esptool.py``, the utility that is called by the build system to reset the chip, interact with the ROM bootloader, and flash firmware. One simple solution to try is to manually reset as described below. If it does not help, you can find more details about possible issues in the `esptool troubleshooting <https://docs.espressif.com/projects/esptool/en/latest/esp32/troubleshooting.html>`_ page.
|
||||
|
||||
|
|
|
|||
|
|
@ -76,6 +76,14 @@ Introduction
|
|||
* Multiple peripherals
|
||||
* Built-in security hardware
|
||||
|
||||
.. only:: esp32p4
|
||||
|
||||
* High performance MCU with RISC-V dual-core processors
|
||||
* Powerful image and voice processing capability
|
||||
* Single-precision FPU and AI extensions
|
||||
* Rich set of peripherals including MIPI, USB, SDIO, and Ethernet
|
||||
* Built-in security hardware
|
||||
|
||||
Powered by 40 nm technology, {IDF_TARGET_NAME} provides a robust, highly integrated platform, which helps meet the continuous demands for efficient power usage, compact design, security, high performance, and reliability.
|
||||
|
||||
Espressif provides basic hardware and software resources to help application developers realize their ideas using the {IDF_TARGET_NAME} series hardware. The software development framework by Espressif is intended for development of Internet-of-Things (IoT) applications with Wi-Fi, Bluetooth, power management and several other system features.
|
||||
|
|
@ -150,6 +158,10 @@ If you have one of {IDF_TARGET_NAME} official development boards listed below, y
|
|||
ESP32-C6-DevKitC-1 <https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html>
|
||||
ESP32-C6-DevKitM-1 <https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitm-1/index.html>
|
||||
|
||||
.. only:: esp32p4
|
||||
|
||||
To be announced.
|
||||
|
||||
.. _get-started-get-prerequisites:
|
||||
|
||||
Software
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2 MB external flash", esp32s2="WiFi, silicon revision 0, 2 MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2 MB embedded flash", esp32c3="WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c6="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.0, 2 MB external flash", esp32h2="BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.1, 2 MB external flash"}
|
||||
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2 MB external flash", esp32s2="WiFi, silicon revision 0, 2 MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2 MB embedded flash", esp32c3="WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c6="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.0, 2 MB external flash", esp32h2="BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.1, 2 MB external flash", esp32p4="silicon revision v0.0, 2 MB external flash"}
|
||||
|
||||
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332", esp32c6="473816", esp32h2="268256"}
|
||||
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332", esp32c6="473816", esp32h2="268256", esp32p4="618848"}
|
||||
|
||||
Build the Project
|
||||
=================
|
||||
|
|
@ -72,7 +72,9 @@ Monitor the Output
|
|||
|
||||
To check if "hello_world" is indeed running, type ``idf.py -p PORT monitor`` (Do not forget to replace PORT with your serial port name).
|
||||
|
||||
This command launches the :doc:`IDF Monitor <../api-guides/tools/idf-monitor>` application::
|
||||
This command launches the :doc:`IDF Monitor <../api-guides/tools/idf-monitor>` application.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ idf.py -p <PORT> monitor
|
||||
Running idf_monitor in directory [...]/esp/hello_world/build
|
||||
|
|
|
|||
|
|
@ -12,7 +12,9 @@ ESP-IDF requires some prerequisite tools to be installed so you can build firmwa
|
|||
For this Getting Started we are going to use the Command Prompt, but after ESP-IDF is installed you can use `Eclipse Plugin <https://github.com/espressif/idf-eclipse-plugin/blob/master/README.md>`_ or another graphical IDE with CMake support instead.
|
||||
|
||||
.. note::
|
||||
|
||||
Limitations:
|
||||
|
||||
- The installation path of ESP-IDF and ESP-IDF Tools must not be longer than 90 characters. Too long installation paths might result in a failed build.
|
||||
- The installation path of Python or ESP-IDF must not contain white spaces or parentheses.
|
||||
- The installation path of Python or ESP-IDF should not contain special characters (non-ASCII) unless the operating system is configured with "Unicode UTF-8" support.
|
||||
|
|
@ -41,7 +43,7 @@ What Is the Usecase for Online and Offline Installer
|
|||
|
||||
Online Installer is very small and allows the installation of all available releases of ESP-IDF. The installer downloads only necessary dependencies including `Git For Windows`_ during the installation process. The installer stores downloaded files in the cache directory ``%userprofile%\.espressif``
|
||||
|
||||
Offline Installer does not require any network connection. The installer contains all required dependencies including `Git For Windows`_ .
|
||||
Offline Installer does not require any network connection. The installer contains all required dependencies including `Git For Windows`_.
|
||||
|
||||
Components of the Installation
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
|
|
|||
|
|
@ -1 +1,39 @@
|
|||
.. output_log
|
||||
.. output_log
|
||||
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
...
|
||||
esptool.py v4.8.dev3
|
||||
Serial port /dev/cu.SLAB_USBtoUART
|
||||
Connecting....
|
||||
Chip is ESP32-P4 (revision v0.0)
|
||||
Features: High-Performance MCU
|
||||
Crystal is 40MHz
|
||||
MAC: 00:00:00:00:00:00
|
||||
Uploading stub...
|
||||
Running stub...
|
||||
Stub running...
|
||||
Changing baud rate to 460800
|
||||
Changed.
|
||||
Configuring flash size...
|
||||
Flash will be erased from 0x00002000 to 0x00007fff...
|
||||
Flash will be erased from 0x00010000 to 0x0003bfff...
|
||||
Flash will be erased from 0x00008000 to 0x00008fff...
|
||||
SHA digest in image updated
|
||||
Compressed 20960 bytes to 12653...
|
||||
Writing at 0x00002000... (100 %)
|
||||
Wrote 20960 bytes (12653 compressed) at 0x00002000 in 0.6 seconds (effective 277.1 kbit/s)...
|
||||
Hash of data verified.
|
||||
Compressed 179584 bytes to 94528...
|
||||
Writing at 0x00035efb... (100 %)
|
||||
Wrote 179584 bytes (94528 compressed) at 0x00010000 in 2.6 seconds (effective 549.9 kbit/s)...
|
||||
Hash of data verified.
|
||||
Compressed 3072 bytes to 103...
|
||||
Writing at 0x00008000... (100 %)
|
||||
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 420.7 kbit/s)...
|
||||
Hash of data verified.
|
||||
|
||||
Leaving...
|
||||
Hard resetting via RTS pin...
|
||||
Done
|
||||
|
|
|
|||
|
|
@ -141,12 +141,12 @@
|
|||
|
||||
{IDF_TARGET_NAME} 支持 USB 外设，无需外部 USB 至 UART 桥，即可烧录二进制文件。
|
||||
|
||||
{IDF_TARGET_USB_PIN_DM:default="尚未更新！", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26"}
|
||||
{IDF_TARGET_USB_PIN_DP:default="尚未更新！", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27"}
|
||||
{IDF_TARGET_USB_PIN_DM:default="尚未更新！", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26", esp32p4="GPIO24/26"}
|
||||
{IDF_TARGET_USB_PIN_DP:default="尚未更新！", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27", esp32p4="GPIO24/26"}
|
||||
|
||||
{IDF_TARGET_NAME} 上的 USB 使用 **{IDF_TARGET_USB_PIN_DP}** 作为 **D+**， **{IDF_TARGET_USB_PIN_DM}** 作为 **D-**。
|
||||
|
||||
.. only:: SOC_USB_SERIAL_JTAG_SUPPORTED and not esp32s3
|
||||
.. only:: SOC_USB_SERIAL_JTAG_SUPPORTED and not esp32s3 and not esp32p4
|
||||
|
||||
.. note:: {IDF_TARGET_NAME} 仅支持 *USB CDC and JTAG*。
|
||||
|
||||
|
|
@ -348,6 +348,9 @@ macOS 提供了 **屏幕** 命令，因此无需安装串口终端程序。
|
|||
输出示例
|
||||
^^^^^^^^^^^
|
||||
|
||||
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35"}
|
||||
|
||||
以下是一个日志示例。如果没看到任何输出，请尝试重置开发板。
|
||||
|
||||
.. highlight:: none
|
||||
|
|
@ -376,7 +379,7 @@ macOS 提供了 **屏幕** 命令，因此无需安装串口终端程序。
|
|||
|
||||
.. 注解::
|
||||
|
||||
在某些串口接线方式下，在 {IDF_TARGET_NAME} 启动并开始打印串口日志前，需要在终端程序中禁用串口 RTS ＆ DTR 管脚。该问题仅存在于将 RTS ＆ DTR 管脚直接连接到 EN ＆ GPIO0 管脚上的情况，绝大多数开发板（包括乐鑫所有的开发板）都没有这个问题。更多详细信息，请参考 `esptool 文档`_。
|
||||
在某些串口接线方式下，在 {IDF_TARGET_NAME} 启动并开始打印串口日志前，需要在终端程序中禁用串口 RTS ＆ DTR 管脚。该问题仅存在于将 RTS ＆ DTR 管脚直接连接到 EN ＆ {IDF_TARGET_STRAP_GPIO} 管脚上的情况，绝大多数开发板（包括乐鑫所有的开发板）都没有这个问题。更多详细信息，请参考 `esptool 文档`_。
|
||||
|
||||
如在安装 {IDF_TARGET_NAME} 硬件开发的软件环境时，从 :ref:`get-started-connect` 跳转到了这里，请从 :ref:`get-started-configure` 继续阅读。
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
连接失败
|
||||
-----------------
|
||||
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9"}
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35"}
|
||||
|
||||
如果在运行给定命令时出现如“连接失败”这样的错误，造成该错误的原因之一可能是运行 ``esptool.py`` 时出现错误。 ``esptool.py`` 是构建系统调用的程序，用于重置芯片、与 ROM 引导加载器交互以及烧录固件的工具。可以按照以下步骤进行手动复位，轻松解决该问题。如果问题仍未解决，请参考 `esptool 故障排除 <https://docs.espressif.com/projects/esptool/en/latest/esp32/troubleshooting.html>`_ 获取更多信息。
|
||||
|
||||
|
|
|
|||
|
|
@ -76,6 +76,14 @@
|
|||
* 多种外设
|
||||
* 内置安全硬件
|
||||
|
||||
.. only:: esp32p4
|
||||
|
||||
* 搭载 RISC-V 32 位双核处理器的高性能 MCU
|
||||
* 强大的图像与语音处理能力
|
||||
* 支持单精度 FPU 和 AI 扩展
|
||||
* 外设丰富包括 MIPI、USB、SDIO、以太网等
|
||||
* 内置安全硬件
|
||||
|
||||
{IDF_TARGET_NAME} 采用 40 nm 工艺制成，具有最佳的功耗性能、射频性能、稳定性、通用性和可靠性，适用于各种应用场景和不同功耗需求。
|
||||
|
||||
乐鑫为用户提供完整的软、硬件资源，进行 {IDF_TARGET_NAME} 硬件设备的开发。其中，乐鑫的软件开发环境 ESP-IDF 旨在协助用户快速开发物联网 (IoT) 应用，可满足用户对 Wi-Fi、蓝牙、低功耗等方面的要求。
|
||||
|
|
@ -150,6 +158,10 @@
|
|||
ESP32-C6-DevKitC-1 <https://docs.espressif.com/projects/espressif-esp-dev-kits/zh_CN/latest/esp32c6/esp32-c6-devkitc-1/index.html>
|
||||
ESP32-C6-DevKitM-1 <https://docs.espressif.com/projects/espressif-esp-dev-kits/zh_CN/latest/esp32c6/esp32-c6-devkitm-1/index.html>
|
||||
|
||||
.. only:: esp32p4
|
||||
|
||||
即将发布
|
||||
|
||||
.. _get-started-get-prerequisites:
|
||||
|
||||
软件：
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2 MB external flash", esp32s2="WiFi, silicon revision 0, 2 MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2 MB embedded flash", esp32c3="WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c6="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.0, 2 MB external flash", esp32h2="BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.1, 2 MB external flash"}
|
||||
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2 MB external flash", esp32s2="WiFi, silicon revision 0, 2 MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2 MB embedded flash", esp32c3="WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c6="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.0, 2 MB external flash", esp32h2="BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.1, 2 MB external flash", esp32p4="silicon revision v0.0, 2 MB external flash"}
|
||||
|
||||
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332", esp32c6="473816", esp32h2="268256"}
|
||||
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332", esp32c6="473816", esp32h2="268256", esp32p4="618848"}
|
||||
|
||||
编译工程
|
||||
=========================
|
||||
|
|
@ -72,7 +72,9 @@
|
|||
|
||||
可以使用 ``idf.py -p PORT monitor`` 命令，监视 “hello_world” 工程的运行情况。注意，不要忘记将 PORT 替换为自己的串口名称。
|
||||
|
||||
运行该命令后，:doc:`IDF 监视器 <../api-guides/tools/idf-monitor>` 应用程序将启动：::
|
||||
运行该命令后，:doc:`IDF 监视器 <../api-guides/tools/idf-monitor>` 应用程序将启动。
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ idf.py -p <PORT> monitor
|
||||
Running idf_monitor in directory [...]/esp/hello_world/build
|
||||
|
|
|
|||
|
|
@ -12,7 +12,9 @@ ESP-IDF 需要安装一些必备工具，才能围绕 {IDF_TARGET_NAME} 构建
|
|||
本入门指南介绍了如何通过 **命令提示符** 进行有关操作。不过，安装 ESP-IDF 后，还可以使用 `Eclipse Plugin <https://github.com/espressif/idf-eclipse-plugin/blob/master/README_CN.md>`_ 或其他支持 CMake 的图形化工具 IDE。
|
||||
|
||||
.. note::
|
||||
|
||||
限定条件：
|
||||
|
||||
- 请注意 ESP-IDF 和 ESP-IDF 工具的安装路径不能超过 90 个字符，安装路径过长可能会导致构建失败。
|
||||
- Python 或 ESP-IDF 的安装路径中一定不能包含空格或括号。
|
||||
- 除非操作系统配置为支持 Unicode UTF-8，否则 Python 或 ESP-IDF 的安装路径中也不能包括特殊字符（非 ASCII 码字符）
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue