From 20190c1811dc551758d8daede25213ce1df2b25c Mon Sep 17 00:00:00 2001 From: Wang Ning Date: Wed, 15 Jul 2020 16:04:49 +0800 Subject: [PATCH] Update according to DGAP-60 --- docs/en/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst | 2 +- docs/zh_CN/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/en/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst b/docs/en/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst index 42825dcfac..6bd1747fda 100644 --- a/docs/en/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst +++ b/docs/en/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst @@ -79,7 +79,7 @@ Description of Components * - USB to UART Bridge - Single USB-UART bridge chip provides transfer rates up to 3 Mbps. * - Boot Button - - Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port. + - Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port. * - Reset Button - Reset button. * - 3.3 V Power On LED diff --git a/docs/zh_CN/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst b/docs/zh_CN/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst index 8ebb9c724d..91becc4c91 100644 --- a/docs/zh_CN/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst +++ b/docs/zh_CN/hw-reference/esp32s2/user-guide-saola-1-v1.2.rst @@ -78,7 +78,7 @@ ESP32-S2-Saola-1 是乐鑫一款基于 ESP32-S2 的小型开发板。板上的 * - USB 至 UART 桥接器 - 单芯片 USB 至 UART 桥接器，可提供高达 3 Mbps 的传输速率。 * - Boot 键。 - - 下载按键。按住 Boot 键的同时按一下 EN 键进入“固件下载”模式，通过串口下载固件。 + - 下载按键。按住 **Boot** 键的同时按一下 **Reset** 键进入“固件下载”模式，通过串口下载固件。 * - Reset 键。 - 复位按键。 * - 3.3 V 电源指示灯