Merge branch 'bugfix/add_multiple_scan_mode' into 'master'

Bugfix: Connect example to add scan mode config

Closes IDFGH-4793 and IDFGH-4812

See merge request espressif/esp-idf!12525

components/esp_wifi/Kconfig

@@ -430,6 +430,16 @@ menu "PHY"
 
             If unsure, choose 'n'.
 
+    config ESP32_PHY_DEFAULT_INIT_IF_INVALID
+        bool "Reset default PHY init data if invalid"
+        default n
+        depends on ESP32_PHY_INIT_DATA_IN_PARTITION
+        help
+            If enabled, PHY init data will be restored to default if
+            it cannot be verified successfully to avoid endless bootloops.
+
+            If unsure, choose 'n'.
+
     if ESP32_PHY_INIT_DATA_IN_PARTITION
         config ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
             bool "Support multiple PHY init data bin"

components/esp_wifi/src/phy_init.c

@@ -339,16 +339,43 @@ const esp_phy_init_data_t* esp_phy_get_init_data(void)
         ESP_LOGE(TAG, "failed to allocate memory for PHY init data");
         return NULL;
     }
+    // read phy data from flash
     esp_err_t err = esp_partition_read(partition, 0, init_data_store, init_data_store_length);
     if (err != ESP_OK) {
         ESP_LOGE(TAG, "failed to read PHY data partition (0x%x)", err);
+        free(init_data_store);
         return NULL;
     }
+    // verify data
     if (memcmp(init_data_store, PHY_INIT_MAGIC, sizeof(phy_init_magic_pre)) != 0 ||
         memcmp(init_data_store + init_data_store_length - sizeof(phy_init_magic_post),
                 PHY_INIT_MAGIC, sizeof(phy_init_magic_post)) != 0) {
+#ifndef CONFIG_ESP32_PHY_DEFAULT_INIT_IF_INVALID
         ESP_LOGE(TAG, "failed to validate PHY data partition");
+        free(init_data_store);
         return NULL;
+#else
+        ESP_LOGE(TAG, "failed to validate PHY data partition, restoring default data into flash...");
+
+        memcpy(init_data_store,
+               PHY_INIT_MAGIC, sizeof(phy_init_magic_pre));
+        memcpy(init_data_store + sizeof(phy_init_magic_pre),
+               &phy_init_data, sizeof(phy_init_data));
+        memcpy(init_data_store + sizeof(phy_init_magic_pre) + sizeof(phy_init_data),
+               PHY_INIT_MAGIC, sizeof(phy_init_magic_post));
+
+        assert(memcmp(init_data_store, PHY_INIT_MAGIC, sizeof(phy_init_magic_pre)) == 0);
+        assert(memcmp(init_data_store + init_data_store_length - sizeof(phy_init_magic_post),
+                      PHY_INIT_MAGIC, sizeof(phy_init_magic_post)) == 0);
+
+        // write default data
+        err = esp_partition_write(partition, 0, init_data_store, init_data_store_length);
+        if (err != ESP_OK) {
+            ESP_LOGE(TAG, "failed to write default PHY data partition (0x%x)", err);
+            free(init_data_store);
+            return NULL;
+        }
+#endif // CONFIG_ESP32_PHY_DEFAULT_INIT_IF_INVALID
     }
 #if CONFIG_ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
     if ((*(init_data_store + (sizeof(phy_init_magic_pre) + PHY_SUPPORT_MULTIPLE_BIN_OFFSET)))) {
@@ -751,8 +778,8 @@ static esp_err_t phy_get_multiple_init_data(const esp_partition_t* partition,
 
     err = phy_find_bin_data_according_type(init_data_store, init_data_control_info, init_data_multiple, init_data_type);
     if (err != ESP_OK) {
-		ESP_LOGW(TAG, "%s has not been certified, use DEFAULT PHY init data", s_phy_type[init_data_type]);
+        ESP_LOGW(TAG, "%s has not been certified, use DEFAULT PHY init data", s_phy_type[init_data_type]);
-		s_phy_init_data_type = ESP_PHY_INIT_DATA_TYPE_DEFAULT;
+        s_phy_init_data_type = ESP_PHY_INIT_DATA_TYPE_DEFAULT;
     } else {
         s_phy_init_data_type = init_data_type;
     }
@@ -829,18 +856,19 @@ esp_err_t esp_phy_update_country_info(const char *country)
 {
 #if CONFIG_ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
     uint8_t phy_init_data_type_map = 0;
-    //if country equal s_phy_current_country, return;
-    if (!memcmp(country, s_phy_current_country, sizeof(s_phy_current_country))) {
-        return ESP_OK;
-    }
-
-    memcpy(s_phy_current_country, country, sizeof(s_phy_current_country));
 
     if (!s_multiple_phy_init_data_bin) {
         ESP_LOGD(TAG, "Does not support multiple PHY init data bins");
         return ESP_FAIL;
     }
 
+   //if country equal s_phy_current_country, return;
+    if (!memcmp(country, s_phy_current_country, sizeof(s_phy_current_country))) {
+        return ESP_OK;
+    }
+
+    memcpy(s_phy_current_country, country, sizeof(s_phy_current_country));
+
     phy_init_data_type_map = phy_find_bin_type_according_country(country);
     if (phy_init_data_type_map == s_phy_init_data_type) {
         return ESP_OK;

examples/common_components/protocol_examples_common/Kconfig.projbuild

@@ -20,6 +20,74 @@ menu "Example Connection Configuration"
             help
                 WiFi password (WPA or WPA2) for the example to use.
                 Can be left blank if the network has no security set.
+
+        choice EXAMPLE_WIFI_SCAN_METHOD
+            prompt "WiFi Scan Method"
+            default EXAMPLE_WIFI_SCAN_METHOD_FAST
+            help
+                WiFi scan method:
+
+                If "Fast" is selected, scan will end after find SSID match AP.
+
+                If "All Channel" is selected, scan will end after scan all the channel.
+
+            config EXAMPLE_WIFI_SCAN_METHOD_FAST
+                bool "Fast"
+            config EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
+                bool "All Channel"
+        endchoice
+
+        menu "WiFi Scan threshold"
+            config EXAMPLE_WIFI_SCAN_RSSI_THRESHOLD
+                int "WiFi minimum rssi"
+                range -127 0
+
+                default -127
+                help
+                    The minimum rssi to accept in the scan mode.
+
+            choice EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD
+                prompt "WiFi Scan auth mode threshold"
+                default EXAMPLE_WIFI_AUTH_OPEN
+                help
+                    The weakest authmode to accept in the scan mode.
+
+                config EXAMPLE_WIFI_AUTH_OPEN
+                    bool "OPEN"
+                config EXAMPLE_WIFI_AUTH_WEP
+                    bool "WEP"
+                config EXAMPLE_WIFI_AUTH_WPA_PSK
+                    bool "WPA PSK"
+                config EXAMPLE_WIFI_AUTH_WPA2_PSK
+                    bool "WPA2 PSK"
+                config EXAMPLE_WIFI_AUTH_WPA_WPA2_PSK
+                    bool "WPA WPA2 PSK"
+                config EXAMPLE_WIFI_AUTH_WPA2_ENTERPRISE
+                    bool "WPA2 ENTERPRISE"
+                config EXAMPLE_WIFI_AUTH_WPA3_PSK
+                    bool "WPA3 PSK"
+                config EXAMPLE_WIFI_AUTH_WPA2_WPA3_PSK
+                    bool "WPA2 WPA3 PSK"
+                config EXAMPLE_WIFI_AUTH_WAPI_PSK
+                    bool "WAPI PSK"
+            endchoice
+        endmenu
+
+        choice EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD
+            prompt "WiFi Connect AP Sort Method"
+            default EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
+            help
+                WiFi connect AP sort method:
+
+                If "Signal" is selected, Sort matched APs in scan list by RSSI.
+
+                If "Security" is selected, Sort matched APs in scan list by security mode.
+
+            config EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
+                bool "Signal"
+            config EXAMPLE_WIFI_CONNECT_AP_BY_SECURITY
+                bool "Security"
+        endchoice
     endif
 
     config EXAMPLE_CONNECT_ETHERNET

examples/common_components/protocol_examples_common/connect.c

@@ -48,6 +48,38 @@
 
 #define EXAMPLE_DO_CONNECT CONFIG_EXAMPLE_CONNECT_WIFI || CONFIG_EXAMPLE_CONNECT_ETHERNET
 
+#if CONFIG_EXAMPLE_WIFI_SCAN_METHOD_FAST
+#define EXAMPLE_WIFI_SCAN_METHOD WIFI_FAST_SCAN
+#elif CONFIG_EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
+#define EXAMPLE_WIFI_SCAN_METHOD WIFI_ALL_CHANNEL_SCAN
+#endif
+
+#if CONFIG_EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
+#define EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD WIFI_CONNECT_AP_BY_SIGNAL
+#elif CONFIG_EXAMPLE_WIFI_CONNECT_AP_BY_SECURITY
+#define EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD WIFI_CONNECT_AP_BY_SECURITY
+#endif
+
+#if CONFIG_EXAMPLE_WIFI_AUTH_OPEN
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_OPEN
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WEP
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WEP
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WPA_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA_PSK
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WPA2_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_PSK
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WPA_WPA2_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA_WPA2_PSK
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WPA2_ENTERPRISE
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_ENTERPRISE
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WPA3_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA3_PSK
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WPA2_WPA3_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_WPA3_PSK
+#elif CONFIG_EXAMPLE_WIFI_AUTH_WAPI_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WAPI_PSK
+#endif
+
 static int s_active_interfaces = 0;
 static xSemaphoreHandle s_semph_get_ip_addrs;
 static esp_netif_t *s_example_esp_netif = NULL;
@@ -265,6 +297,10 @@ static esp_netif_t *wifi_start(void)
         .sta = {
             .ssid = CONFIG_EXAMPLE_WIFI_SSID,
             .password = CONFIG_EXAMPLE_WIFI_PASSWORD,
+            .scan_method = EXAMPLE_WIFI_SCAN_METHOD,
+            .sort_method = EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD,
+            .threshold.rssi = CONFIG_EXAMPLE_WIFI_SCAN_RSSI_THRESHOLD,
+            .threshold.authmode = EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD,
         },
     };
     ESP_LOGI(TAG, "Connecting to %s...", wifi_config.sta.ssid);