esp_rom: sync changes for ESP32-S3 USB related files, minor fix for S2

Used esp-rom tag esp32s3-20210327 and did manual cleanup.
Rename s_usb_osglue to rom_usb_osglue like it was done for esp32s2.
Some comments in esp32s2 headers are synced from esp32s3.
pull/11215/head
Ivan Grokhotkov 2022-01-18 18:39:06 +01:00
rodzic 141b7356fb
commit 80c9ef7b89
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 1E050E141B280628
10 zmienionych plików z 84 dodań i 62 usunięć

Wyświetl plik

@ -792,7 +792,7 @@ usb_dfu_force_detach = 0x40002a54;
usb_dev_deinit = 0x40002a60;
usb_dw_ctrl_deinit = 0x40002a6c;
/* Data (.data, .bss, .rodata) */
s_usb_osglue = 0x3fceffac;
rom_usb_osglue = 0x3fceffac;
/***************************************

Wyświetl plik

@ -372,19 +372,43 @@ int usb_dc_ep_read_continue(uint8_t ep);
int usb_dc_ep_mps(uint8_t ep);
//Hack - fake interrupts by pollinfg
/**
* @brief Poll for interrupts that need to be handled
*
* When the USB interrupt is not hooked up to an actual CPU interrupt, you
* can call this periodically to handle the USB events that need handling.
*/
void usb_dc_check_poll_for_interrupts(void);
//Prepare for USB persist. You should reboot after this.
/*
* @brief Prepare for USB persist
*
* This takes the USB peripheral offline in such a way that it seems 'just busy' to the
* host. This way, the chip can reboot (e.g. into bootloader mode) and pick up the USB
* configuration again, without the conenction to the host being interrupted.
*
* @note Actual persistence is depending on USBDC_PERSIST_ENA being set in flags, as this
* is also used to e.g. reboot into DFU mode.
*
* @note Please reboot soon after calling this.
*/
int usb_dc_prepare_persist(void);
/*
* @brief USB interrupt handler
*
* This can be hooked up by the OS to the USB peripheral interrupt.
*/
void usb_dw_isr_handler(void);
/**
* @brief Provide IDF with an interface to clear the static variable usb_dw_ctrl
*
*
*/
void usb_dw_ctrl_deinit(void);
int usb_dc_ep_write_would_block(const uint8_t ep);
#ifdef __cplusplus

Wyświetl plik

@ -392,6 +392,12 @@ int usb_transfer_sync(uint8_t ep, uint8_t *data, size_t dlen, unsigned int flags
*/
void usb_cancel_transfer(uint8_t ep);
/**
* @brief Provide IDF with an interface to clear the static variable usb_dev
*
*
*/
void usb_dev_deinit(void);
void usb_dev_resume(int configuration);
int usb_dev_get_configuration(void);

Wyświetl plik

@ -217,26 +217,6 @@ struct string_descriptor {
uint16_t bString[];
} __packed;
#define ROM_MAX_CFG_DESC_CNT 1
struct rom_usb_descriptors {
const struct usb_device_descriptor *device_descr;
const void *config_descr[ROM_MAX_CFG_DESC_CNT];
int string_count; // including string_descriptor_zero
const struct string_descriptor_zero *string0_descr;
const struct string_descriptor *string_descrs[];
};
/* Descriptors defined in the ROM */
extern struct usb_device_descriptor general_device_descr;
extern const void* acm_config_descr;
extern const void* dfu_config_descr;
extern const struct string_descriptor str_manu_descr;
extern const struct string_descriptor str_prod_descr;
extern const struct string_descriptor_zero string0_descr;
extern const struct rom_usb_descriptors acm_usb_descriptors;
extern const struct rom_usb_descriptors dfu_usb_descriptors;
extern const struct rom_usb_descriptors *rom_usb_curr_desc;
#ifdef __cplusplus
}

Wyświetl plik

@ -372,19 +372,42 @@ int usb_dc_ep_read_continue(uint8_t ep);
int usb_dc_ep_mps(uint8_t ep);
//Hack - fake interrupts by pollinfg
/**
* @brief Poll for interrupts that need to be handled
*
* When the USB interrupt is not hooked up to an actual CPU interrupt, you
* can call this periodically to handle the USB events that need handling.
*/
void usb_dc_check_poll_for_interrupts(void);
//Prepare for USB persist. You should reboot after this.
/*
* @brief Prepare for USB persist
*
* This takes the USB peripheral offline in such a way that it seems 'just busy' to the
* host. This way, the chip can reboot (e.g. into bootloader mode) and pick up the USB
* configuration again, without the conenction to the host being interrupted.
*
* @note Actual persistence is depending on USBDC_PERSIST_ENA being set in flags, as this
* is also used to e.g. reboot into DFU mode.
*
* @note Please reboot soon after calling this.
*/
int usb_dc_prepare_persist(void);
/*
* @brief USB interrupt handler
*
* This can be hooked up by the OS to the USB peripheral interrupt.
*/
void usb_dw_isr_handler(void);
int usb_dc_ep_write_would_block(const uint8_t ep);
/**
* @brief Provide IDF with an interface to clear the static variable usb_dw_ctrl
*
*
*/
void usb_dw_ctrl_deinit(void);
#ifdef __cplusplus

Wyświetl plik

@ -392,6 +392,12 @@ int usb_transfer_sync(uint8_t ep, uint8_t *data, size_t dlen, unsigned int flags
*/
void usb_cancel_transfer(uint8_t ep);
/**
* @brief Provide IDF with an interface to clear the static variable usb_dev
*
*
*/
void usb_dev_deinit(void);
void usb_dev_resume(int configuration);
int usb_dev_get_configuration(void);

Wyświetl plik

@ -140,6 +140,7 @@ int dfu_custom_handle_req(struct usb_setup_packet *pSetup,
typedef void(*usb_dfu_detach_routine_t)(int delay);
void usb_dfu_set_detach_cb(usb_dfu_detach_routine_t cb);
void usb_dfu_force_detach(void);
#ifdef __cplusplus

Wyświetl plik

@ -1,16 +1,8 @@
// Copyright 2019-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*
* SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
@ -33,7 +25,7 @@ typedef struct {
usb_osglue_wait_routine_t wait_proc;
} usb_osglue_data_t;
extern usb_osglue_data_t s_usb_osglue;
extern usb_osglue_data_t rom_usb_osglue;
#ifdef __cplusplus
}

Wyświetl plik

@ -1,16 +1,8 @@
// Copyright 2019-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*
* SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
@ -34,7 +26,7 @@ extern "C" {
//This being non-0 indicates a memory location where a 'testament' is stored, aka a piece of text that should be output
//after a reboot. Can contain core dump info or something.
#define USBDC_TESTAMENT_LOC_MASK 0x7FFFF //bits 19-0; this is added to a base address of 0x3FF80000.
#define USBDC_TESTAMENT_LOC_MASK 0x7FFFF //bits 19-0; this is added to a base address of SOC_MEM_INTERNAL_LOW. (0x3FF9E000)
//The testament is a FIFO. The ROM will output all data between textstart and textend; if textend is lower than textstart it will
//output everything from textstart to memend, then memstart to textend.

Wyświetl plik

@ -530,8 +530,6 @@ components/esp_rom/include/esp32s3/rom/usb/usb_dc.h
components/esp_rom/include/esp32s3/rom/usb/usb_descriptor.h
components/esp_rom/include/esp32s3/rom/usb/usb_device.h
components/esp_rom/include/esp32s3/rom/usb/usb_dfu.h
components/esp_rom/include/esp32s3/rom/usb/usb_os_glue.h
components/esp_rom/include/esp32s3/rom/usb/usb_persist.h
components/esp_rom/include/esp_rom_crc.h
components/esp_rom/include/esp_rom_gpio.h
components/esp_rom/include/linux/soc/reset_reasons.h