Merge branch 'doc/update_espnow_example_v4.4' into 'release/v4.4'

docs(wifi): change the magic varible from int to uint32_t on the receiving side (v4.4)

See merge request espressif/esp-idf!30310

docs/en/api-guides/wifi.rst

@@ -1860,7 +1860,7 @@ The following packets will **NOT** be dumped to the application:
 
  - 802.11 error frame, such as the frame with a CRC error, etc.
 
-For frames that the sniffer **can** dump, the application can additionally decide which specific type of packets can be filtered to the application by using :cpp:func:`esp_wifi_set_promiscuous_filter()` and :cpp:func:`esp_wifi_set_promiscuous_ctrl_filter()`. By default, it will filter all 802.11 data and management frames to the application.
+For frames that the sniffer **can** dump, the application can additionally decide which specific type of packets can be filtered to the application by using :cpp:func:`esp_wifi_set_promiscuous_filter()` and :cpp:func:`esp_wifi_set_promiscuous_ctrl_filter()`. By default, it will filter all 802.11 data and management frames to the application. If you want to filter the 802.11 control frames, the filter parameter in :cpp:func:`esp_wifi_set_promiscuous_filter()` should include `WIFI_PROMIS_FILTER_MASK_CTRL` type, and if you want to differentiate control frames further, then call :cpp:func:`esp_wifi_set_promiscuous_ctrl_filter()`.
 
 The Wi-Fi sniffer mode can be enabled in the Wi-Fi mode of WIFI_MODE_NULL, or WIFI_MODE_STA, or WIFI_MODE_AP, or WIFI_MODE_APSTA. In other words, the sniffer mode is active when the station is connected to the AP, or when the AP has a Wi-Fi connection. Please note that the sniffer has a **great impact** on the throughput of the station or AP Wi-Fi connection. Generally, we should **NOT** enable the sniffer, when the station/AP Wi-Fi connection experiences heavy traffic unless we have special reasons.
 

docs/zh_CN/api-guides/wifi.rst

@@ -1792,7 +1792,7 @@ Wi-Fi Sniffer 模式可以通过 :cpp:func:`esp_wifi_set_promiscuous()` 使能
 
  - 802.11 错误帧，如有 CRC 错误的帧等。
 
-对于Sniffer 模式 **可以** 转储的帧，应用程序可以另外使用 :cpp:func:`esp_wifi_set_promiscuous_filter()` 和 :cpp:func:`esp_wifi_set_promiscuous_ctrl_filter()` 决定筛选哪些特定类型的数据包。应用程序默认筛选所有 802.11 数据和管理帧。
+对于 Sniffer 模式 **可以** 转储的帧，应用程序可以另外使用 :cpp:func:`esp_wifi_set_promiscuous_filter()` 和 :cpp:func:`esp_wifi_set_promiscuous_ctrl_filter()` 决定筛选哪些特定类型的数据包。应用程序默认筛选所有 802.11 数据和管理帧。如果你想要筛选 802.11 控制帧，:cpp:func:`esp_wifi_set_promiscuous_filter()` 中的 filter 参数需要包含 “WIFI_PROMIS_FILTER_MASK_CTRL” 类型， 如果你想进一步区分 802.11 控制帧，那么调用 :cpp:func:`esp_wifi_set_promiscuous_ctrl_filter()`。
 
 可以在 WIFI_MODE_NULL、WIFI_MODE_STA、WIFI_MODE_AP、WIFI_MODE_APSTA 等Wi-Fi 模式下使能 Wi-Fi Sniffer 模式。也就是说，当 station 连接到 AP，或者 AP 有 Wi-Fi 连接时，就可以使能。请注意，Sniffer 模式对 station/AP Wi-Fi 连接的吞吐量有 **很大影响**。通常，除非有特别原因，当 station/AP Wi-Fi 连接出现大量流量，不应使能。
 

examples/wifi/espnow/main/espnow_example_main.c

@@ -104,7 +104,7 @@ static void example_espnow_recv_cb(const uint8_t *mac_addr, const uint8_t *data,
 }
 
 /* Parse received ESPNOW data. */
-int example_espnow_data_parse(uint8_t *data, uint16_t data_len, uint8_t *state, uint16_t *seq, int *magic)
+int example_espnow_data_parse(uint8_t *data, uint16_t data_len, uint8_t *state, uint16_t *seq, uint32_t *magic)
 {
     example_espnow_data_t *buf = (example_espnow_data_t *)data;
     uint16_t crc, crc_cal = 0;
@@ -150,7 +150,7 @@ static void example_espnow_task(void *pvParameter)
     example_espnow_event_t evt;
     uint8_t recv_state = 0;
     uint16_t recv_seq = 0;
-    int recv_magic = 0;
+    uint32_t recv_magic = 0;
     bool is_broadcast = false;
     int ret;