esp_eth: Fix w5500 to break from potentially infinite tx loop

The issue typically happens for link-down during Tx. Added two retry levels, one before checking the sanity of the w5500 phy register and another for the Tx done itself (if the device is in the sane state)

Closes https://github.com/espressif/esp-idf/issues/6233
pull/6882/head
David Cermak 2021-04-08 10:16:08 +02:00 zatwierdzone przez bot
rodzic dfe9580967
commit 7af358ed93
1 zmienionych plików z 16 dodań i 2 usunięć

Wyświetl plik

@ -502,6 +502,16 @@ static esp_err_t emac_w5500_set_peer_pause_ability(esp_eth_mac_t *mac, uint32_t
return ESP_ERR_NOT_SUPPORTED;
}
static inline bool is_w5500_sane_for_rxtx(emac_w5500_t *emac)
{
uint8_t phycfg;
/* phy is ok for rx and tx operations if bits RST and LNK are set (no link down, no reset) */
if (w5500_read(emac, W5500_REG_PHYCFGR, &phycfg, 1) == ESP_OK && (phycfg & 0x8001)) {
return true;
}
return false;
}
static esp_err_t emac_w5500_transmit(esp_eth_mac_t *mac, uint8_t *buf, uint32_t length)
{
esp_err_t ret = ESP_OK;
@ -525,10 +535,14 @@ static esp_err_t emac_w5500_transmit(esp_eth_mac_t *mac, uint8_t *buf, uint32_t
MAC_CHECK(w5500_send_command(emac, W5500_SCR_SEND, 100) == ESP_OK, "issue SEND command failed", err, ESP_FAIL);
// pooling the TX done event
int retry = 0;
uint8_t status = 0;
do {
while (!(status & W5500_SIR_SEND)) {
MAC_CHECK(w5500_read(emac, W5500_REG_SOCK_IR(0), &status, sizeof(status)) == ESP_OK, "read SOCK0 IR failed", err, ESP_FAIL);
} while (!(status & W5500_SIR_SEND));
if ((retry++ > 3 && !is_w5500_sane_for_rxtx(emac)) || retry > 10) {
return ESP_FAIL;
}
}
// clear the event bit
status = W5500_SIR_SEND;
MAC_CHECK(w5500_write(emac, W5500_REG_SOCK_IR(0), &status, sizeof(status)) == ESP_OK, "write SOCK0 IR failed", err, ESP_FAIL);