Merge branch 'bugfix/fix_esp_modem_mode_switch_timeout' into 'master'

fix esp_modem switch mode timeout

Closes FCS-412, IDFGH-2106, IDFGH-2170, and IDFGH-1201

See merge request espressif/esp-idf!8913
pull/5452/head
David Čermák 2020-06-01 15:12:32 +08:00
commit 738e9f76fd
4 zmienionych plików z 73 dodań i 58 usunięć

Wyświetl plik

@ -52,7 +52,7 @@ See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/l
## Example Output
The example will get module and operator's information after start up, and then go into PPP mode to start mqtt client operations. This example will also send a short message to someone's phone if you have enabled this feature in menuconfig.
The example will get module and operator's information after start up, and then go into PPP mode to start mqtt client operations. This example will also send a short message to someone's phone if you have enabled this feature in menuconfig. The PPP connection will get restarted after 60 seconds.
### BG96 Output

Wyświetl plik

@ -52,7 +52,7 @@ typedef struct modem_dte modem_dte_t;
*/
#define MODEM_COMMAND_TIMEOUT_DEFAULT (500) /*!< Default timeout value for most commands */
#define MODEM_COMMAND_TIMEOUT_OPERATOR (75000) /*!< Timeout value for getting operator status */
#define MODEM_COMMAND_TIMEOUT_MODE_CHANGE (3000) /*!< Timeout value for changing working mode */
#define MODEM_COMMAND_TIMEOUT_MODE_CHANGE (5000) /*!< Timeout value for changing working mode */
#define MODEM_COMMAND_TIMEOUT_HANG_UP (90000) /*!< Timeout value for hang up */
#define MODEM_COMMAND_TIMEOUT_POWEROFF (1000) /*!< Timeout value for power down */

Wyświetl plik

@ -412,6 +412,8 @@ modem_dte_t *esp_modem_dte_init(const esp_modem_dte_config_t *config)
res = uart_driver_install(esp_dte->uart_port, config->rx_buffer_size, config->tx_buffer_size,
config->event_queue_size, &(esp_dte->event_queue), 0);
MODEM_CHECK(res == ESP_OK, "install uart driver failed", err_uart_config);
res = uart_set_rx_timeout(esp_dte->uart_port, 1);
MODEM_CHECK(res == ESP_OK, "set rx timeout failed", err_uart_config);
/* Set pattern interrupt, used to detect the end of a line. */
res = uart_enable_pattern_det_baud_intr(esp_dte->uart_port, '\n', 1, MIN_PATTERN_INTERVAL, MIN_POST_IDLE, MIN_PRE_IDLE);

Wyświetl plik

@ -167,7 +167,7 @@ static esp_err_t mqtt_event_handler(esp_mqtt_event_handle_t event)
}
static void on_ppp_changed(void *arg, esp_event_base_t event_base,
int32_t event_id, void *event_data)
int32_t event_id, void *event_data)
{
ESP_LOGI(TAG, "PPP state changed event %d", event_id);
if (event_id == NETIF_PPP_ERRORUSER) {
@ -179,7 +179,7 @@ static void on_ppp_changed(void *arg, esp_event_base_t event_base,
static void on_ip_event(void *arg, esp_event_base_t event_base,
int32_t event_id, void *event_data)
int32_t event_id, void *event_data)
{
ESP_LOGD(TAG, "IP event! %d", event_id);
if (event_id == IP_EVENT_PPP_GOT_IP) {
@ -227,11 +227,6 @@ void app_main(void)
event_group = xEventGroupCreate();
// Init netif object
esp_netif_config_t cfg = ESP_NETIF_DEFAULT_PPP();
esp_netif_t *esp_netif = esp_netif_new(&cfg);
assert(esp_netif);
/* create dte object */
esp_modem_dte_config_t config = ESP_MODEM_DTE_DEFAULT_CONFIG();
/* setup UART specific configuration based on kconfig options */
@ -245,67 +240,85 @@ void app_main(void)
config.event_queue_size = CONFIG_EXAMPLE_MODEM_UART_EVENT_QUEUE_SIZE;
config.event_task_stack_size = CONFIG_EXAMPLE_MODEM_UART_EVENT_TASK_STACK_SIZE;
config.event_task_priority = CONFIG_EXAMPLE_MODEM_UART_EVENT_TASK_PRIORITY;
config.line_buffer_size = CONFIG_EXAMPLE_MODEM_UART_RX_BUFFER_SIZE/2;
config.line_buffer_size = CONFIG_EXAMPLE_MODEM_UART_RX_BUFFER_SIZE / 2;
modem_dte_t *dte = esp_modem_dte_init(&config);
/* Register event handler */
ESP_ERROR_CHECK(esp_modem_set_event_handler(dte, modem_event_handler, ESP_EVENT_ANY_ID, NULL));
/* create dce object */
// Init netif object
esp_netif_config_t cfg = ESP_NETIF_DEFAULT_PPP();
esp_netif_t *esp_netif = esp_netif_new(&cfg);
assert(esp_netif);
void *modem_netif_adapter = esp_modem_netif_setup(dte);
esp_modem_netif_set_default_handlers(modem_netif_adapter, esp_netif);
while (1) {
modem_dce_t *dce = NULL;
/* create dce object */
#if CONFIG_EXAMPLE_MODEM_DEVICE_SIM800
modem_dce_t *dce = sim800_init(dte);
dce = sim800_init(dte);
#elif CONFIG_EXAMPLE_MODEM_DEVICE_BG96
modem_dce_t *dce = bg96_init(dte);
dce = bg96_init(dte);
#else
#error "Unsupported DCE"
#endif
assert(dce != NULL);
ESP_ERROR_CHECK(dce->set_flow_ctrl(dce, MODEM_FLOW_CONTROL_NONE));
ESP_ERROR_CHECK(dce->store_profile(dce));
/* Print Module ID, Operator, IMEI, IMSI */
ESP_LOGI(TAG, "Module: %s", dce->name);
ESP_LOGI(TAG, "Operator: %s", dce->oper);
ESP_LOGI(TAG, "IMEI: %s", dce->imei);
ESP_LOGI(TAG, "IMSI: %s", dce->imsi);
/* Get signal quality */
uint32_t rssi = 0, ber = 0;
ESP_ERROR_CHECK(dce->get_signal_quality(dce, &rssi, &ber));
ESP_LOGI(TAG, "rssi: %d, ber: %d", rssi, ber);
/* Get battery voltage */
uint32_t voltage = 0, bcs = 0, bcl = 0;
ESP_ERROR_CHECK(dce->get_battery_status(dce, &bcs, &bcl, &voltage));
ESP_LOGI(TAG, "Battery voltage: %d mV", voltage);
/* setup PPPoS network parameters */
assert(dce != NULL);
ESP_ERROR_CHECK(dce->set_flow_ctrl(dce, MODEM_FLOW_CONTROL_NONE));
ESP_ERROR_CHECK(dce->store_profile(dce));
/* Print Module ID, Operator, IMEI, IMSI */
ESP_LOGI(TAG, "Module: %s", dce->name);
ESP_LOGI(TAG, "Operator: %s", dce->oper);
ESP_LOGI(TAG, "IMEI: %s", dce->imei);
ESP_LOGI(TAG, "IMSI: %s", dce->imsi);
/* Get signal quality */
uint32_t rssi = 0, ber = 0;
ESP_ERROR_CHECK(dce->get_signal_quality(dce, &rssi, &ber));
ESP_LOGI(TAG, "rssi: %d, ber: %d", rssi, ber);
/* Get battery voltage */
uint32_t voltage = 0, bcs = 0, bcl = 0;
ESP_ERROR_CHECK(dce->get_battery_status(dce, &bcs, &bcl, &voltage));
ESP_LOGI(TAG, "Battery voltage: %d mV", voltage);
/* setup PPPoS network parameters */
#if !defined(CONFIG_EXAMPLE_MODEM_PPP_AUTH_NONE) && (defined(CONFIG_LWIP_PPP_PAP_SUPPORT) || defined(CONFIG_LWIP_PPP_CHAP_SUPPORT))
esp_netif_ppp_set_auth(esp_netif, auth_type, CONFIG_EXAMPLE_MODEM_PPP_AUTH_USERNAME, CONFIG_EXAMPLE_MODEM_PPP_AUTH_PASSWORD);
esp_netif_ppp_set_auth(esp_netif, auth_type, CONFIG_EXAMPLE_MODEM_PPP_AUTH_USERNAME, CONFIG_EXAMPLE_MODEM_PPP_AUTH_PASSWORD);
#endif
void *modem_netif_adapter = esp_modem_netif_setup(dte);
esp_modem_netif_set_default_handlers(modem_netif_adapter, esp_netif);
/* attach the modem to the network interface */
esp_netif_attach(esp_netif, modem_netif_adapter);
/* Wait for IP address */
xEventGroupWaitBits(event_group, CONNECT_BIT, pdTRUE, pdTRUE, portMAX_DELAY);
/* Config MQTT */
esp_mqtt_client_config_t mqtt_config = {
.uri = BROKER_URL,
.event_handle = mqtt_event_handler,
};
esp_mqtt_client_handle_t mqtt_client = esp_mqtt_client_init(&mqtt_config);
esp_mqtt_client_start(mqtt_client);
xEventGroupWaitBits(event_group, GOT_DATA_BIT, pdTRUE, pdTRUE, portMAX_DELAY);
esp_mqtt_client_destroy(mqtt_client);
/* Exit PPP mode */
ESP_ERROR_CHECK(esp_modem_stop_ppp(dte));
/* attach the modem to the network interface */
esp_netif_attach(esp_netif, modem_netif_adapter);
/* Wait for IP address */
xEventGroupWaitBits(event_group, CONNECT_BIT, pdTRUE, pdTRUE, portMAX_DELAY);
/* Config MQTT */
esp_mqtt_client_config_t mqtt_config = {
.uri = BROKER_URL,
.event_handle = mqtt_event_handler,
};
esp_mqtt_client_handle_t mqtt_client = esp_mqtt_client_init(&mqtt_config);
esp_mqtt_client_start(mqtt_client);
xEventGroupWaitBits(event_group, GOT_DATA_BIT, pdTRUE, pdTRUE, portMAX_DELAY);
esp_mqtt_client_destroy(mqtt_client);
/* Exit PPP mode */
ESP_ERROR_CHECK(esp_modem_stop_ppp(dte));
xEventGroupWaitBits(event_group, STOP_BIT, pdTRUE, pdTRUE, portMAX_DELAY);
#if CONFIG_EXAMPLE_SEND_MSG
const char *message = "Welcome to ESP32!";
ESP_ERROR_CHECK(example_send_message_text(dce, CONFIG_EXAMPLE_SEND_MSG_PEER_PHONE_NUMBER, message));
ESP_LOGI(TAG, "Send send message [%s] ok", message);
#endif
/* Power down module */
ESP_ERROR_CHECK(dce->power_down(dce));
ESP_LOGI(TAG, "Power down");
ESP_ERROR_CHECK(dce->deinit(dce));
ESP_LOGI(TAG, "Restart after 60 seconds");
vTaskDelay(pdMS_TO_TICKS(60000));
}
/* Destroy the netif adapter withe events, which internally frees also the esp-netif instance */
esp_modem_netif_clear_default_handlers(modem_netif_adapter);
esp_modem_netif_teardown(modem_netif_adapter);
xEventGroupWaitBits(event_group, STOP_BIT, pdTRUE, pdTRUE, portMAX_DELAY);
#if CONFIG_EXAMPLE_SEND_MSG
const char *message = "Welcome to ESP32!";
ESP_ERROR_CHECK(example_send_message_text(dce, CONFIG_EXAMPLE_SEND_MSG_PEER_PHONE_NUMBER, message));
ESP_LOGI(TAG, "Send send message [%s] ok", message);
#endif
/* Power down module */
ESP_ERROR_CHECK(dce->power_down(dce));
ESP_LOGI(TAG, "Power down");
ESP_ERROR_CHECK(dce->deinit(dce));
ESP_ERROR_CHECK(dte->deinit(dte));
}