Merge branch 'docs/update_cn_trans_esp_http_client_external-ram' into 'master'

Docs: Updated cn trans for esp_http_client and external_ram

Closes DOC-6976

See merge request espressif/esp-idf!28212

docs/en/api-guides/external-ram.rst

@@ -32,8 +32,7 @@ Hardware
 
         Some PSRAM chips are 1.8 V devices and some are 3.3 V. Consult the datasheet for your PSRAM chip and {IDF_TARGET_NAME} device to find out the working voltages.
 
-        By default PSRAM is powered up by the on-chip LDO2, you can use :ref:`CONFIG_ESP_VDD_PSRAM_LDO_ID` to switch the LDO ID according. Setting this value to -1 for using external power supply, this means the on-chip LDO will not be used.
-        By default PSRAM connected LDO is set to correct voltage according to the used Espressif module. You can still use :ref:`CONFIG_ESP_VDD_PSRAM_LDO_VOLTAGE_MV` to select LDO output voltage if you do not use an Espressif module. When using external power supply, this option does not exist.
+        By default, the PSRAM is powered up by the on-chip LDO2. You can use :ref:`CONFIG_ESP_VDD_PSRAM_LDO_ID` to switch the LDO ID accordingly. Set this value to -1 to use an external power supply, which means the on-chip LDO will not be used. By default, the PSRAM connected to LDO is set to the correct voltage based on the Espressif module used. You can still use :ref:`CONFIG_ESP_VDD_PSRAM_LDO_VOLTAGE_MV` to select the LDO output voltage if you are not using an Espressif module. When using an external power supply, this option does not exist.
 
 .. note::
 

docs/en/api-reference/protocols/esp_http_client.rst

@@ -83,7 +83,7 @@ ESP HTTP client supports both **Basic** and **Digest** Authentication.
     * Users can provide the username and password in the ``url`` or the ``username`` and ``password`` members of the ``esp_http_client_config_t`` configuration. For ``auth_type = HTTP_AUTH_TYPE_BASIC``, the HTTP client takes only one perform operation to pass the authentication process.
     * If ``auth_type = HTTP_AUTH_TYPE_NONE``, but the ``username`` and ``password`` fields are present in the configuration, the HTTP client takes two perform operations. The client will receive the ``401 Unauthorized`` header in its first attempt to connect to the server. Based on this information, it decides which authentication method to choose and performs it in the second operation.
     * Check out the example functions ``http_auth_basic``, ``http_auth_basic_redirect`` (for Basic authentication) and ``http_auth_digest`` (for Digest authentication) in the application example for implementation details.
-    * Currently, only MD5 and SHA-256 algorithms are supported with Digest authentication.
+    * Currently, Digest authentication supports only MD5 and SHA-256 algorithms.
 
 
 Examples of Authentication Configuration

docs/zh_CN/api-guides/external-ram.rst

@@ -24,7 +24,15 @@
 
 .. note::
 
-    PSRAM 芯片的工作电压分为 1.8 V 和 3.3 V。其工作电压必须与 flash 的工作电压匹配。请查询相应 PSRAM 芯片以及 {IDF_TARGET_NAME} 的技术规格书获取准确的工作电压。对于 1.8 V 的 PSRAM 芯片，请确保在启动时将 MTDI 管脚设置为高电平，或者将 {IDF_TARGET_NAME} 中的 eFuses 设置为始终使用 1.8 V 的 VDD_SIO 电平，否则有可能会损坏 PSRAM 和/或 flash 芯片。
+    .. only:: esp32 or esp32s2 or esp32s3
+
+        PSRAM 芯片的工作电压分为 1.8 V 和 3.3 V。其工作电压必须与 flash 的工作电压匹配。请查询相应 PSRAM 芯片以及 {IDF_TARGET_NAME} 的技术规格书获取准确的工作电压。对于 1.8 V 的 PSRAM 芯片，请确保在启动时将 MTDI 管脚设置为高电平，或者将 {IDF_TARGET_NAME} 中的 eFuses 设置为始终使用 1.8 V 的 VDD_SIO 电平，否则有可能会损坏 PSRAM 和/或 flash 芯片。
+
+    .. only:: esp32p4
+
+        请查询相应 PSRAM 芯片以及 {IDF_TARGET_NAME} 的技术规格书获取准确的工作电压。
+
+        PSRAM 默认由片上 LDO2 供电。可设置 :ref:`CONFIG_ESP_VDD_PSRAM_LDO_ID` 来切换相应的 LDO ID，将该值设为 -1 表示使用外部电源，即不使用片上 LDO。默认情况下，连接到 LDO 的 PSRAM 会基于所使用的乐鑫模组设置正确电压。如果未使用乐鑫模组，仍可设置 :ref:`CONFIG_ESP_VDD_PSRAM_LDO_VOLTAGE_MV` 来选择 LDO 输出电压。使用外部电源时，该选项不存在。
 
 .. note::
 

docs/zh_CN/api-reference/protocols/esp_http_client.rst

@@ -83,6 +83,7 @@ ESP HTTP 客户端同时支持 **基本** 和 **摘要** 认证。
     * 用户可以在 ``url`` 或 ``esp_http_client_config_t`` 配置中的 ``username`` 和 ``password`` 处输入用户名和密码。对于 ``auth_type = HTTP_AUTH_TYPE_BASIC``，HTTP 客户端只需执行一项操作就可通过认证过程。
     * 如果 ``auth_type = HTTP_AUTH_TYPE_NONE``，但配置中有 ``username`` 和 ``password`` 字段，HTTP 客户端需要执行两项操作。客户端在第一次尝试连接服务器时，会收到 ``401 Unauthorized`` 头，而后再根据这些信息来选择认证方法，并在第二项操作中执行。
     * 如需了解实现细节，请参考应用示例中的函数 ``http_auth_basic``、 ``http_auth_basic_redirect`` （用于基本认证）和 ``http_auth_digest`` （用于摘要认证）。
+    * 目前，摘要认证仅支持 MD5 和 SHA-256 算法。
 
 
 认证配置示例