mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

lcd: Support rotation SSD1306 and fix mirror y.

pull/11369/head
Vilem Zavodny 2022-12-06 15:43:17 +01:00
rodzic 4e083d8214
commit 68178540f0
1 zmienionych plików z 20 dodań i 3 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

23
components/esp_lcd/src/esp_lcd_panel_ssd1306.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -52,6 +52,7 @@ typedef struct {
int x_gap;
int y_gap;
unsigned int bits_per_pixel;
bool swap_axes;
} ssd1306_panel_t;
esp_err_t esp_lcd_new_panel_ssd1306(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
@ -137,6 +138,8 @@ static esp_err_t panel_ssd1306_init(esp_lcd_panel_t *panel)
esp_lcd_panel_io_tx_param(io, SSD1306_CMD_SET_CHARGE_PUMP, (uint8_t[]) {
0x14 // enable charge pump
}, 1);
esp_lcd_panel_io_tx_param(io, SSD1306_CMD_MIRROR_X_OFF, NULL, 0);
esp_lcd_panel_io_tx_param(io, SSD1306_CMD_MIRROR_Y_OFF, NULL, 0);
esp_lcd_panel_io_tx_param(io, SSD1306_CMD_DISP_ON, NULL, 0);
// SEG/COM will be ON after 100ms after sending DISP_ON command
vTaskDelay(pdMS_TO_TICKS(100));
@ -148,11 +151,22 @@ static esp_err_t panel_ssd1306_draw_bitmap(esp_lcd_panel_t *panel, int x_start,
ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
esp_lcd_panel_io_handle_t io = ssd1306->io;
// adding extra gap
x_start += ssd1306->x_gap;
x_end += ssd1306->x_gap;
y_start += ssd1306->y_gap;
y_end += ssd1306->y_gap;
if (ssd1306->swap_axes) {
int x = x_start;
x_start = y_start;
y_start = x;
x = x_end;
x_end = y_end;
y_end = x;
}
// one page contains 8 rows (COMs)
uint8_t page_start = y_start / 8;
uint8_t page_end = (y_end - 1) / 8;
@ -201,7 +215,7 @@ static esp_err_t panel_ssd1306_mirror(esp_lcd_panel_t *panel, bool mirror_x, boo
if (mirror_y) {
command = SSD1306_CMD_MIRROR_Y_ON;
} else {
command = SSD1306_CMD_MIRROR_X_OFF;
command = SSD1306_CMD_MIRROR_Y_OFF;
}
esp_lcd_panel_io_tx_param(io, command, NULL, 0);
return ESP_OK;
@ -209,7 +223,10 @@ static esp_err_t panel_ssd1306_mirror(esp_lcd_panel_t *panel, bool mirror_x, boo
static esp_err_t panel_ssd1306_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
{
return ESP_ERR_NOT_SUPPORTED;
ssd1306_panel_t *ssd1306 = __containerof(panel, ssd1306_panel_t, base);
ssd1306->swap_axes = swap_axes;
return ESP_OK;
}
static esp_err_t panel_ssd1306_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)