feat: added ble wake up overhead support

pull/12212/head
cjin 2023-09-01 16:46:29 +08:00
rodzic fd22414fba
commit 574800b50a
3 zmienionych plików z 134 dodań i 30 usunięć

Wyświetl plik

@ -40,9 +40,13 @@
#include "hci_uart.h"
#include "bt_osi_mem.h"
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
#if SOC_PM_RETENTION_HAS_CLOCK_BUG
#include "esp_private/sleep_retention.h"
#endif
#endif // SOC_PM_RETENTION_HAS_CLOCK_BUG
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
#include "esp_private/sleep_modem.h"
#endif // CONFIG_FREERTOS_USE_TICKLESS_IDLE
#ifdef CONFIG_BT_BLUEDROID_ENABLED
#include "hci/hci_hal.h"
@ -55,7 +59,7 @@
#include "esp_sleep.h"
#include "hal/efuse_hal.h"
#include "soc/rtc.h"
/* Macro definition
************************************************************************
*/
@ -141,7 +145,9 @@ extern void ble_lll_rfmgmt_set_sleep_cb(void *s_cb, void *w_cb, void *s_arg,
extern void r_ble_rtc_wake_up_state_clr(void);
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
extern const sleep_retention_entries_config_t *esp_ble_mac_retention_link_get(uint8_t *size, uint8_t extra);
extern void esp_ble_set_wakeup_overhead(uint32_t overhead);
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
extern void esp_ble_change_rtc_freq(uint32_t freq);
extern int os_msys_init(void);
extern void os_msys_buf_free(void);
extern int ble_sm_alg_gen_dhkey(const uint8_t *peer_pub_key_x,
@ -456,6 +462,39 @@ static int esp_intr_free_wrapper(void **ret_handle)
return rc;
}
void esp_bt_rtc_slow_clk_select(uint8_t slow_clk_src)
{
/* Select slow clock source for BT momdule */
switch (slow_clk_src) {
case MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using main XTAL as clock source");
uint32_t chip_version = efuse_hal_chip_revision();
if (chip_version == 0) {
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (400 - 1));
} else{
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (5 - 1));
}
break;
case MODEM_CLOCK_LPCLK_SRC_RC_SLOW:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 136 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (5 - 1));
break;
case MODEM_CLOCK_LPCLK_SRC_XTAL32K:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using external 32.768 kHz XTAL as clock source");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (1 - 1));
break;
case MODEM_CLOCK_LPCLK_SRC_RC32K:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (1 - 1));
break;
case MODEM_CLOCK_LPCLK_SRC_EXT32K:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz oscillator as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (1 - 1));
break;
default:
}
}
IRAM_ATTR void controller_sleep_cb(uint32_t enable_tick, void *arg)
{
if (!s_ble_active) {
@ -506,8 +545,14 @@ static void sleep_modem_ble_mac_modem_state_deinit(void)
{
sleep_retention_entries_destroy(SLEEP_RETENTION_MODULE_BLE_MAC);
}
void sleep_modem_light_sleep_overhead_set(uint32_t overhead)
{
esp_ble_set_wakeup_overhead(overhead - 500);
}
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
esp_err_t controller_sleep_init(void)
{
esp_err_t rc = 0;
@ -534,6 +579,11 @@ esp_err_t controller_sleep_init(void)
assert(rc == 0);
esp_sleep_enable_bt_wakeup();
ESP_LOGW(NIMBLE_PORT_LOG_TAG, "Enable light sleep, the wake up source is BLE timer");
rc = esp_pm_register_inform_out_light_sleep_overhead_callback(sleep_modem_light_sleep_overhead_set);
if (rc != ESP_OK) {
goto error;
}
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
return rc;
@ -541,6 +591,7 @@ error:
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
esp_sleep_disable_bt_wakeup();
esp_pm_unregister_inform_out_light_sleep_overhead_callback(sleep_modem_light_sleep_overhead_set);
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
/*lock should release first and then delete*/
if (s_pm_lock != NULL) {
@ -558,6 +609,7 @@ void controller_sleep_deinit(void)
r_ble_rtc_wake_up_state_clr();
esp_sleep_disable_bt_wakeup();
sleep_modem_ble_mac_modem_state_deinit();
esp_pm_unregister_inform_out_light_sleep_overhead_callback(sleep_modem_light_sleep_overhead_set);
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
#ifdef CONFIG_PM_ENABLE
/* lock should be released first */
@ -642,6 +694,7 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
uint8_t mac[6];
esp_err_t ret = ESP_OK;
ble_npl_count_info_t npl_info;
bool use_main_xtal = false;
memset(&npl_info, 0, sizeof(ble_npl_count_info_t));
@ -702,26 +755,22 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
modem_clock_module_enable(PERIPH_BT_MODULE);
/* Select slow clock source for BT momdule */
#if CONFIG_BT_LE_LP_CLK_SRC_MAIN_XTAL
uint32_t chip_version = efuse_hal_chip_revision();
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using main XTAL as clock source");
if (chip_version == 0) {
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL, (400 - 1));
} else{
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL, (5 - 1));
}
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL);
#else
#if CONFIG_RTC_CLK_SRC_INT_RC
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 136 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_RC_SLOW, (5 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_RC_SLOW);
#elif CONFIG_RTC_CLK_SRC_EXT_CRYS
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using external 32.768 kHz XTAL as clock source");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_XTAL32K, (1 - 1));
if (rtc_clk_slow_src_get() == SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_XTAL32K);
} else {
ESP_LOGW(NIMBLE_PORT_LOG_TAG, "32.768kHz XTAL not detected, fall back to main XTAL as Bluetooth sleep clock");
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL);
use_main_xtal = true;
}
#elif CONFIG_RTC_CLK_SRC_INT_RC32K
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_RC32K, (1 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_RC32K);
#elif CONFIG_RTC_CLK_SRC_EXT_OSC
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz oscillator as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_EXT32K, (1 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_EXT32K);
#else
ESP_LOGE(NIMBLE_PORT_LOG_TAG, "Unsupported clock source");
assert(0);
@ -745,6 +794,10 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
goto modem_deint;
}
if (use_main_xtal) {
esp_ble_change_rtc_freq(100000);
}
#if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
interface_func_t bt_controller_log_interface;
bt_controller_log_interface = esp_bt_controller_log_interface;

Wyświetl plik

@ -42,7 +42,11 @@
#if SOC_PM_RETENTION_HAS_CLOCK_BUG
#include "esp_private/sleep_retention.h"
#endif
#endif // SOC_PM_RETENTION_HAS_CLOCK_BUG
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
#include "esp_private/sleep_modem.h"
#endif // CONFIG_FREERTOS_USE_TICKLESS_IDLE
#ifdef CONFIG_BT_BLUEDROID_ENABLED
#include "hci/hci_hal.h"
@ -53,6 +57,7 @@
#include "esp_private/periph_ctrl.h"
#include "esp_sleep.h"
#include "soc/rtc.h"
/* Macro definition
************************************************************************
*/
@ -134,7 +139,9 @@ extern uint32_t r_os_cputime_get32(void);
extern uint32_t r_os_cputime_ticks_to_usecs(uint32_t ticks);
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
extern const sleep_retention_entries_config_t *esp_ble_mac_retention_link_get(uint8_t *size, uint8_t extra);
extern void esp_ble_set_wakeup_overhead(uint32_t overhead);
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
// extern void esp_ble_change_rtc_freq(uint32_t freq);
extern void ble_lll_rfmgmt_set_sleep_cb(void *s_cb, void *w_cb, void *s_arg,
void *w_arg, uint32_t us_to_enabled);
extern void r_ble_rtc_wake_up_state_clr(void);
@ -452,6 +459,33 @@ static int esp_intr_free_wrapper(void **ret_handle)
return rc;
}
void esp_bt_rtc_slow_clk_select(uint8_t slow_clk_src)
{
/* Select slow clock source for BT momdule */
switch (slow_clk_src) {
case MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using main XTAL as clock source");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (320 - 1));
case MODEM_CLOCK_LPCLK_SRC_RC_SLOW:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 136 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (5 - 1));
break;
case MODEM_CLOCK_LPCLK_SRC_XTAL32K:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using external 32.768 kHz XTAL as clock source");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (1 - 1));
break;
case MODEM_CLOCK_LPCLK_SRC_RC32K:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (1 - 1));
break;
case MODEM_CLOCK_LPCLK_SRC_EXT32K:
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz oscillator as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, slow_clk_src, (1 - 1));
break;
default:
}
}
IRAM_ATTR void controller_sleep_cb(uint32_t enable_tick, void *arg)
{
if (!s_ble_active) {
@ -503,6 +537,10 @@ static void sleep_modem_ble_mac_modem_state_deinit(void)
sleep_retention_entries_destroy(SLEEP_RETENTION_MODULE_BLE_MAC);
}
void sleep_modem_light_sleep_overhead_set(uint32_t overhead)
{
esp_ble_set_wakeup_overhead(overhead - 500);
}
#endif // CONFIG_FREERTOS_USE_TICKLESS_IDLE
esp_err_t controller_sleep_init(void)
@ -531,6 +569,11 @@ esp_err_t controller_sleep_init(void)
assert(rc == 0);
esp_sleep_enable_bt_wakeup();
ESP_LOGW(NIMBLE_PORT_LOG_TAG, "Enable light sleep, the wake up source is BLE timer");
rc = esp_pm_register_inform_out_light_sleep_overhead_callback(sleep_modem_light_sleep_overhead_set);
if (rc != ESP_OK) {
goto error;
}
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
return rc;
@ -538,6 +581,7 @@ error:
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
esp_sleep_disable_bt_wakeup();
esp_pm_unregister_inform_out_light_sleep_overhead_callback(sleep_modem_light_sleep_overhead_set);
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
/*lock should release first and then delete*/
if (s_pm_lock != NULL) {
@ -555,6 +599,7 @@ void controller_sleep_deinit(void)
r_ble_rtc_wake_up_state_clr();
esp_sleep_disable_bt_wakeup();
sleep_modem_ble_mac_modem_state_deinit();
esp_pm_unregister_inform_out_light_sleep_overhead_callback(sleep_modem_light_sleep_overhead_set);
#endif /* CONFIG_FREERTOS_USE_TICKLESS_IDLE */
#ifdef CONFIG_PM_ENABLE
/* lock should be released first */
@ -639,6 +684,7 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
uint8_t mac[6];
esp_err_t ret = ESP_OK;
ble_npl_count_info_t npl_info;
bool use_main_xtal = false;
memset(&npl_info, 0, sizeof(ble_npl_count_info_t));
if (ble_controller_status != ESP_BT_CONTROLLER_STATUS_IDLE) {
@ -698,21 +744,22 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
/* Enable BT-related clocks */
modem_clock_module_enable(PERIPH_BT_MODULE);
#if CONFIG_BT_LE_LP_CLK_SRC_MAIN_XTAL
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using main XTAL as clock source");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL, (320 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL);
#else
#if CONFIG_RTC_CLK_SRC_INT_RC
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 136 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_RC_SLOW, (5 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_RC_SLOW);
#elif CONFIG_RTC_CLK_SRC_EXT_CRYS
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using external 32.768 kHz XTAL as clock source");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_XTAL32K, (1 - 1));
if (rtc_clk_slow_src_get() == SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_XTAL32K);
} else {
ESP_LOGW(NIMBLE_PORT_LOG_TAG, "32.768kHz XTAL not detected, fall back to main XTAL as Bluetooth sleep clock");
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL);
use_main_xtal = true;
}
#elif CONFIG_RTC_CLK_SRC_INT_RC32K
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz RC as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_RC32K, (1 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_RC32K);
#elif CONFIG_RTC_CLK_SRC_EXT_OSC
ESP_LOGI(NIMBLE_PORT_LOG_TAG, "Using 32 kHz oscillator as clock source, can only run legacy ADV or SCAN due to low clock accuracy!");
modem_clock_select_lp_clock_source(PERIPH_BT_MODULE, MODEM_CLOCK_LPCLK_SRC_EXT32K, (1 - 1));
esp_bt_rtc_slow_clk_select(MODEM_CLOCK_LPCLK_SRC_EXT32K);
#else
ESP_LOGE(NIMBLE_PORT_LOG_TAG, "Unsupported clock source");
assert(0);
@ -735,6 +782,10 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
goto modem_deint;
}
if (use_main_xtal) {
// esp_ble_change_rtc_freq(100000);
}
#if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
interface_func_t bt_controller_log_interface;
bt_controller_log_interface = esp_bt_controller_log_interface;

Wyświetl plik

@ -337,7 +337,7 @@ esp_err_t sleep_modem_configure(int max_freq_mhz, int min_freq_mhz, bool light_s
return ESP_OK;
}
#define PERIPH_INFORM_OUT_LIGHT_SLEEP_OVERHEAD_NO 1
#define PERIPH_INFORM_OUT_LIGHT_SLEEP_OVERHEAD_NO 2
/* Inform peripherals of light sleep wakeup overhead time */
static inform_out_light_sleep_overhead_cb_t s_periph_inform_out_light_sleep_overhead_cb[PERIPH_INFORM_OUT_LIGHT_SLEEP_OVERHEAD_NO];