mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

doc(rmt): fixed some typos in rmt example readme file

pull/2534/head
kooho 2018-09-17 10:18:59 +08:00
rodzic 0c6ff65b34
commit 50a5985b06
2 zmienionych plików z 4 dodań i 4 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

4
examples/peripherals/rmt_nec_tx_rx/README.md
Wyświetl plik

@ -8,7 +8,7 @@ This example uses the remote control (RMT) peripheral to transmit and receive co
### Hardware Required
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WORVER-KIT, etc.)
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
* A USB cable for Power supply and programming
By default, this example runs a self test which assumes the TX pin (GPIO18) and RX pin (GPIO19) are _connected together_.
@ -77,4 +77,4 @@ NEC: RMT RCV --- addr: 0xda25 cmd: 0xeb14
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.

4
examples/peripherals/rmt_tx/README.md
Wyświetl plik

@ -8,7 +8,7 @@ This example will shows how to configure and operate the remote control (RMT) pe
### Hardware Required
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WORVER-KIT, etc.)
* A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
* A USB cable for Power supply and programming
* A LED, a speaker or an earphone
@ -64,4 +64,4 @@ RMT Tx: Sample transmission complete
* Hardware connection is not correct: run `make monitor`, and reboot your board to see if there is any output logs.
* The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.