Merge branch 'bugfix/fixes_from_github' into 'master'

Fixes from Github

See merge request idf/esp-idf!4510

components/driver/include/driver/gpio.h

@@ -128,6 +128,7 @@ extern "C" {
 #define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num)      ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 34))         /*!< Check whether it can be a valid GPIO number of output mode */
 
 typedef enum {
+    GPIO_NUM_NC = -1,    /*!< Use to signal not connected to S/W */
     GPIO_NUM_0 = 0,     /*!< GPIO0, input and output */
     GPIO_NUM_1 = 1,     /*!< GPIO1, input and output */
     GPIO_NUM_2 = 2,     /*!< GPIO2, input and output

components/esp32/include/esp_wifi_types.h

@@ -262,7 +262,7 @@ typedef struct {
 } wifi_sta_list_t;
 
 typedef enum {
-    WIFI_STORAGE_FLASH,  /**< all configuration will strore in both memory and flash */
+    WIFI_STORAGE_FLASH,  /**< all configuration will store in both memory and flash */
     WIFI_STORAGE_RAM,    /**< all configuration will only store in the memory */
 } wifi_storage_t;
 
@@ -394,7 +394,7 @@ typedef struct {
     bool stbc_htltf2_en;    /**< enable to receive space time block code HT long training field(stbc-htltf2) data. Default enabled */
     bool ltf_merge_en;      /**< enable to generate htlft data by averaging lltf and ht_ltf data when receiving HT packet. Otherwise, use ht_ltf data directly. Default enabled */
     bool channel_filter_en; /**< enable to turn on channel filter to smooth adjacent sub-carrier. Disable it to keep independence of adjacent sub-carrier. Default enabled */
-    bool manu_scale;        /**< manually scale the CSI data by left shifting or automatically scale the CSI data. If set true, please set the shift bits. false: automatically. true: manually. Default false */ 
+    bool manu_scale;        /**< manually scale the CSI data by left shifting or automatically scale the CSI data. If set true, please set the shift bits. false: automatically. true: manually. Default false */
     uint8_t shift;          /**< manually left shift bits of the scale of the CSI data. The range of the left shift bits is 0~15 */
 } wifi_csi_config_t;
 

components/freertos/include/freertos/portable.h

@@ -204,7 +204,7 @@ BaseType_t xPortInterruptedFromISRContext();
 
 /* Multi-core: get current core ID */
 static inline uint32_t IRAM_ATTR xPortGetCoreID() {
-    int id;
+    uint32_t id;
     __asm__ __volatile__ (
         "rsr.prid %0\n"
         " extui %0,%0,13,1"

components/wpa_supplicant/port/include/endian.h

@@ -86,6 +86,7 @@ typedef	__uint64_t	uint64_t;
 #if 1 //BYTE_ORDER == _LITTLE_ENDIAN
 #define __bswap16     __bswap_16
 #define __bswap32     __bswap_32
+#define __bswap64     __bswap_64
 #define	htobe16(x)	bswap16((x))
 #define	htobe32(x)	bswap32((x))
 #define	htobe64(x)	bswap64((x))

docs/en/api-guides/ulp_instruction_set.rst

@@ -336,9 +336,9 @@ Note that when accessing RTC memories and RTC registers, ULP coprocessor has low
 
 **Examples**::
 
-  1:        MOVE       R1, R2            //R1 = R2 >> R3
+  1:        MOVE       R1, R2            //R1 = R2
 
-  2:        MOVE       R1, 0x03          //R1 = R2 >> 0x03
+  2:        MOVE       R1, 0x03          //R1 = 0x03
 
   3:        .set       value1, 0x03      //constant value1=0x03
             MOVE       R1, value1        //R1 = value1

docs/en/api-reference/system/intr_alloc.rst

@@ -93,10 +93,9 @@ A handler will never be called when disabled, while **its source may still be tr
 
 Sources attached to non-shared interrupt do not support this feature.
 
-Though the framework support this feature, you have to use it *very carefully*. There usually exist 2 ways to stop a interrupt from being triggered: *disable the sourse* or *mask peripheral interrupt status*.
+Though the framework support this feature, you have to use it *very carefully*. There usually exist 2 ways to stop a interrupt from being triggered: *disable the source* or *mask peripheral interrupt status*.
 IDF only handles the enabling and disabling of the source itself, leaving status and mask bits to be handled by users. **Status bits should always be masked before the handler responsible for it is disabled,
-or the status should be handled in other enabled interrupt properly**. You may leave some status bits unhandled if you just disable one of all the handlers without mask the status bits, which causes the interrupt being triggered infinitely,
-and finally a system crash.
+or the status should be handled in other enabled interrupt properly**. You may leave some status bits unhandled if you just disable one of all the handlers without masking the status bits, which causes the interrupt to trigger infinitely resulting in a system crash.
 
 API Reference
 -------------

examples/protocols/pppos_client/components/modem/src/esp_modem_dce_service.c

@@ -101,7 +101,7 @@ err:
 esp_err_t esp_modem_dce_define_pdp_context(modem_dce_t *dce, uint32_t cid, const char *type, const char *apn)
 {
     modem_dte_t *dte = dce->dte;
-    char command[32];
+    char command[64];
     int len = snprintf(command, sizeof(command), "AT+CGDCONT=%d,\"%s\",\"%s\"\r", cid, type, apn);
     DCE_CHECK(len < sizeof(command), "command too long: %s", err, command);
     dce->handle_line = esp_modem_dce_handle_response_default;

tools/kconfig/.gitignore

@@ -11,6 +11,7 @@ zconf.hash.c
 gconf.glade.h
 *.pot
 *.mo
+*.o
 
 #
 # configuration programs

tools/kconfig/lxdialog/check-lxdialog.sh

@@ -7,6 +7,10 @@ ldflags()
 	if [ $(uname -s) == "Darwin" ]; then 
 		#OSX seems to need ncurses too
 		echo -n "-lncurses "
+	elif [ $(uname -s) == "FreeBSD" ]; then
+		# On FreeBSD, the linker needs to know to search port libs for
+		# libintl
+		echo -n "-L/usr/local/lib -lintl "
 	fi
 	pkg-config --libs ncursesw 2>/dev/null && exit
 	pkg-config --libs ncurses 2>/dev/null && exit
@@ -44,6 +48,10 @@ ccflags()
 	if [ $(uname -s) == "Darwin" ]; then
 		#OSX doesn't have libintl
 		echo -n "-DKBUILD_NO_NLS -Wno-format-security "
+	elif [ $(uname -s) == "FreeBSD" ]; then
+		# FreeBSD gettext port has libintl.h, but the compiler needs
+		# to know to search port includes
+		echo -n "-I/usr/local/include "
 	fi
 }