mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

usj: bringup on esp32h2

pull/10691/head
morris 2023-01-30 11:49:20 +08:00
rodzic b7799ec84d
commit 3151f9c8f1
9 zmienionych plików z 48 dodań i 11 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

4
components/esp_rom/esp32c6/ld/esp32c6.rom.api.ld
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -24,7 +24,7 @@ PROVIDE ( esp_rom_efuse_mac_address_crc8 = esp_crc8 );
PROVIDE ( esp_rom_efuse_is_secure_boot_enabled = ets_efuse_secure_boot_enabled );
PROVIDE ( esp_rom_uart_flush_tx = uart_tx_flush );
PROVIDE ( esp_rom_uart_tx_one_char = uart_tx_one_char );
PROVIDE ( esp_rom_uart_tx_one_char = uart_tx_one_char2 );
PROVIDE ( esp_rom_uart_tx_wait_idle = uart_tx_wait_idle );
PROVIDE ( esp_rom_uart_rx_one_char = uart_rx_one_char );
PROVIDE ( esp_rom_uart_rx_string = UartRxString );

4
components/esp_rom/esp32h2/ld/esp32h2.rom.api.ld
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -24,7 +24,7 @@ PROVIDE ( esp_rom_efuse_mac_address_crc8 = esp_crc8 );
PROVIDE ( esp_rom_efuse_is_secure_boot_enabled = ets_efuse_secure_boot_enabled );
PROVIDE ( esp_rom_uart_flush_tx = uart_tx_flush );
PROVIDE ( esp_rom_uart_tx_one_char = uart_tx_one_char );
PROVIDE ( esp_rom_uart_tx_one_char = uart_tx_one_char2 );
PROVIDE ( esp_rom_uart_tx_wait_idle = uart_tx_wait_idle );
PROVIDE ( esp_rom_uart_rx_one_char = uart_rx_one_char );
PROVIDE ( esp_rom_uart_rx_string = UartRxString );

34
components/hal/esp32h2/include/hal/usb_phy_ll.h 100644
Wyświetl plik

@ -0,0 +1,34 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "soc/usb_serial_jtag_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Configures the internal PHY for USB_Serial_JTAG
*
* @param hw Start address of the USB Serial_JTAG registers
*/
static inline void usb_phy_ll_int_jtag_enable(usb_serial_jtag_dev_t *hw)
{
// USB_Serial_JTAG use internal PHY
hw->conf0.phy_sel = 0;
// Disable software control USB D+ D- pullup pulldown (Device FS: dp_pullup = 1)
hw->conf0.pad_pull_override = 0;
// Enable USB D+ pullup
hw->conf0.dp_pullup = 1;
// Enable USB pad function
hw->conf0.usb_pad_enable = 1;
}
#ifdef __cplusplus
}
#endif

2
components/hal/esp32h2/include/hal/usb_serial_jtag_ll.h
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/

4
components/soc/esp32h2/include/soc/Kconfig.soc_caps.in
Wyświetl plik

@ -23,6 +23,10 @@ config SOC_IEEE802154_BLE_ONLY
bool
default y
config SOC_USB_SERIAL_JTAG_SUPPORTED
bool
default y
config SOC_EFUSE_KEY_PURPOSE_FIELD
bool
default y

2
components/soc/esp32h2/include/soc/soc_caps.h
Wyświetl plik

@ -36,7 +36,7 @@
// #define SOC_IEEE802154_SUPPORTED 1 // TODO: IDF-6577
#define SOC_GPTIMER_SUPPORTED 1
#define SOC_IEEE802154_BLE_ONLY 1
// #define SOC_USB_SERIAL_JTAG_SUPPORTED 1 // TODO: IDF-6239
#define SOC_USB_SERIAL_JTAG_SUPPORTED 1
// #define SOC_TEMP_SENSOR_SUPPORTED 1 // TODO: IDF-6229
// #define SOC_SUPPORTS_SECURE_DL_MODE 1 // TODO: IDF-6281
//#define SOC_RISCV_COPROC_SUPPORTED 1 // TODO: IDF-6272

1
docs/docs_not_updated/esp32h2.txt
Wyświetl plik

@ -28,7 +28,6 @@ api-guides/startup
api-guides/RF_calibration
api-guides/blufi
api-guides/coexist
api-guides/usb-serial-jtag-console
api-guides/wifi
api-guides/usb-otg-console
api-guides/wireshark-user-guide

4
docs/en/api-guides/jtag-debugging/configure-builtin-jtag.rst
Wyświetl plik

@ -6,8 +6,8 @@
Configure {IDF_TARGET_NAME} built-in JTAG Interface
===================================================
{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19"}
{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20"}
{IDF_TARGET_JTAG_PIN_Dneg:default="Not Updated!", esp32c3="GPIO18", esp32c6="GPIO12", esp32s3="GPIO19", esp32h2="GPIO26"}
{IDF_TARGET_JTAG_PIN_Dpos:default="Not Updated!", esp32c3="GPIO19", esp32c6="GPIO13", esp32s3="GPIO20", esp32h2="GPIO27"}
{IDF_TARGET_NAME} has a built-in JTAG circuitry and can be debugged without any additional chip. Only an USB cable connected to the D+/D- pins is necessary. The necessary connections are shown in the following section.

4
docs/en/api-guides/usb-serial-jtag-console.rst
Wyświetl plik

@ -13,8 +13,8 @@ Note that, in contrast with the USB OTG peripheral in some Espressif chips, the
Hardware Requirements
=====================
{IDF_TARGET_USB_DP_GPIO:default="Not Updated!",esp32c3="19",esp32s3="20", esp32c6="13"}
{IDF_TARGET_USB_DM_GPIO:default="Not Updated!",esp32c3="18",esp32s3="19", esp32c6="12"}
{IDF_TARGET_USB_DP_GPIO:default="Not Updated!",esp32c3="19",esp32s3="20", esp32c6="13", esp32h2="27"}
{IDF_TARGET_USB_DM_GPIO:default="Not Updated!",esp32c3="18",esp32s3="19", esp32c6="12", esp32h2="26"}
Connect {IDF_TARGET_NAME} to the USB port as follows: